S. Comas-Cardona

发表

Experimental determination of the permeability of textiles: A benchmark exercise

V. Michaud, P. Ermanni, C. Binetruy, 2011 .

Efficient stochastic simulation approach for RTM process with random fibrous permeability

C. Binetruy, B. Cosson, S. Comas-Cardona, 2011 .

Statistical modeling of in-plane permeability of non-woven random fibrous reinforcement

C. Binetruy, S. Comas-Cardona, Feifei Zhang, 2012 .

Modeling of Heat Transfer and Unsaturated Flow in Woven Fiber Reinforcements during Direct Injection-Pultrusion Process of Thermoplastic Composites

Christophe Binetruy, Sébastien Comas-Cardona, C. Binetruy, 2015 .

TOWARDS IMAGE-BASED HOMOGENIZATION BY COMBINING SCANNING TECHNIQUES AND REDUCED ORDER MODELING

F. Chinesta, C. Binetruy, S. Comas-Cardona, 2014 .

Unified microporomechanical approach for mechanical behavior and permeability of misaligned unidirectional fiber reinforcement

C. Binetruy, S. Comas-Cardona, N. Abriak, 2010 .

Models for shear properties/behavior of dry fibrous materials at various scales: a review

C. Binetruy, S. Comas-Cardona, E. Syerko, 2015 .

Consolidation and compression of deformable impregnated fibrous reinforcements: Experimental study and modeling of flow-induced deformations

C. Binetruy, S. Comas-Cardona, A. Hautefeuille, 2020 .

Residual-based adaptivity for two-phase flow simulation in porous media using Physics-informed Neural Networks

S. Comas-Cardona, D. Borzacchiello, J. Aguado, 2021, Computer Methods in Applied Mechanics and Engineering.

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

J. A. García-Manrique, P. Middendorf, V. Michaud, 2021 .

Experimental characterisation of textile compaction response: A benchmark exercise

P. Middendorf, V. Michaud, P. Ermanni, 2020 .

Efficient experimental characterisation of the permeability of fibrous textiles

P. Kelly, S. Bickerton, S. Comas-Cardona, 2016 .

Unidirectional compression of fibre reinforcements. Part 1: A non-linear elastic-plastic behaviour

C. Binetruy, S. Comas-Cardona, P. Krawczak, 2007 .

Introduction of intra-tow release/storage mechanisms in reactive dual-scale flow numerical simulations

S. Comas-Cardona, E. Abisset-Chavanne, M. Imbert, 2018, Journal of Composite Materials.

Effective permeability averaging scheme to address in-plane anisotropy effects in multi-layered preforms

C. Binetruy, S. Comas-Cardona, E. Syerko, 2018, Composites Part A: Applied Science and Manufacturing.

Simulation of liquid composite molding processes using a generic mixed FE-SPH method

C. Binetruy, S. Comas-Cardona, P. Groenenboom, 2005 .

A generic mixed FE-SPH method to address hydro-mechanical coupling in liquid composite moulding processes

C. Binetruy, S. Comas-Cardona, P. Groenenboom, 2005 .

Three-dimensional mechanical properties of dry carbon fiber tows subjected to cyclic compressive loading

C. Binetruy, E. Verron, S. Comas-Cardona, 2018 .

Coupling filtration and flow during liquid composite molding : Experimental investigation and simulation

C. Binetruy, S. Comas-Cardona, P. Krawczak, 2009 .

Modelling the flow of particle-filled resin through a fibrous preform in Liquid Composite Molding technologies

C. Binetruy, S. Comas-Cardona, P. Krawczak, 2007 .

Multi-scale modelling of non-uniform consolidation of uncured toughened unidirectional prepregs

C. Binetruy, S. Advani, S. Hallett, 2018 .

Measurements of droplet deformation in simple shear flow with zero interfacial tension

C. L. Tucker, S. Comas-Cardona, 2001 .

Efficient dual-scale flow and thermo-chemo-rheological coupling simulation during on-line mixing resin transfer molding process

S. Comas-Cardona, E. Abisset-Chavanne, M. Imbert, 2018 .

FIBER REINFORCEMENTS : CORRELATING PERMEABILITY AND LOCAL SPATIAL FIBROUS FEATURES

C. Binetruy, S. Bickerton, S. Comas-Cardona, 2011 .

Unidirectional compression of fibre reinforcements. Part 2: A continuous permeability tensor measurement

C. Binetruy, S. Comas-Cardona, P. Krawczak, 2007 .

Evolution of single carbon and glass fibrous tow cross-sections in dry and lubricated states during compaction perpendicular to the fibers

C. Binetruy, S. Comas-Cardona, J. Hemmer, 2018, Composites Part B: Engineering.

Microporomechanical behavior of perfectly straight unidirectional fiber assembly: Theoretical and experimental

C. Binetruy, S. Comas-Cardona, N. Abriak, 2009 .

Limit of adhesion coefficient measurement of a unidirectional carbon fabric

C. Binetruy, S. Comas-Cardona, M. Lacrampe, 2015 .

An optically-based inverse method to measure in-plane permeability fields of fibrous reinforcements

C. Binetruy, B. Cosson, S. Bickerton, 2014 .

Experimental investigation of intra-tow fluid storage mechanisms in dual-scale fiber reinforcements

S. Comas-Cardona, E. Abisset-Chavanne, M. Imbert, 2018 .

Sensitivity analysis using Physics-informed neural networks

S. Comas-Cardona, D. Borzacchiello, J. Aguado, 2023, ArXiv.

Unloading during the infusion process: Direct measurement of the dual-scale fibrous microstructure evolution with X-ray computed tomography

C. Binetruy, C. Burtin, S. Comas-Cardona, 2018, Composites Part A: Applied Science and Manufacturing.

Compaction behaviour of tow at meso-scale: experimental investigations of morphological evolution at dry, lubricated and saturated states

C. Binetruy, S. Comas-Cardona, J. Hemmer, 2018, IOP Conference Series: Materials Science and Engineering.

Dry fiber automated placement of carbon fibrous preforms

Christophe Binetruy, Sébastien Comas-Cardona, C. Binetruy, 2013 .

Numerical modeling of interply adhesion in composite forming of viscous discontinuous thermoplastic prepregs

C. Binetruy, S. Comas-Cardona, A. Leygue, 2020, Composites Part B: Engineering.

Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure

Johann Guilleminot, Christophe Binetruy, Patricia Krawczak, 2008 .

Influence of the lateral confinement on the transverse mechanical behavior of tows and quasi-unidirectional fabrics: Experimental and modeling investigations of dry through-thickness compaction

C. Binetruy, E. Verron, S. Comas-Cardona, 2020 .

A numerical approach to design dual-scale porosity composite reinforcements with enhanced permeability

C. Binetruy, S. Comas-Cardona, A. Leygue, 2017 .

The impact of air evacuation on the impregnation time of Out-of-Autoclave prepregs

C. Binetruy, S. Comas-Cardona, R. Hinterhoelzl, 2015 .

Air evacuation in consolidation modeling of Out-of-Autoclave prepregs

R. Hinterhölzl, C. Binetruy, S. Comas-Cardona, 2014 .

Design and numerical modelling strategy to form Tailored Fibre Placement preforms: Application to the tetrahedral part with orthotropic final configuration

C. Binetruy, S. Comas-Cardona, N. Hamila, 2022, Composites Part A: Applied Science and Manufacturing.

Multiphysics simulation of an anisothermal reactive spontaneous capillary rise between electric rotor wires

S. Comas-Cardona, J. Kolehmainen, N. Desilles, 2023, Frontiers in Materials.

Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches

C. Binetruy, S. Comas-Cardona, A. Leygue, 2023, Frontiers in Materials.

Models of mechanical properties/behavior of dry fibrous materials at various scales in bending and tension: A review

Christophe Binetruy, Sébastien Comas-Cardona, Elena Syerko, 2012 .

Mechanical signature and full-field measurement of flow-induced large in-plane deformation of fibrous reinforcements in composite processing

C. Binetruy, S. Comas-Cardona, A. Hautefeuille, 2019, Composites Part A: Applied Science and Manufacturing.

Flow modeling of linear and nonlinear fluids in two scale fibrous fabrics

Adrien Leygue, Christophe Aufrere, Francisco Chinesta, 2017 .

Spatial compaction and saturated permeability spacial variations of fibre reinforcements

Christophe Binetruy, Patricia Krawczak, Simon Bickerton, 2008 .