B. Sartory

发表

Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal–Matrix Composite

W. Węglewski, P. Pitchai, M. Basista, 2020, Metallurgical and Materials Transactions A.

Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing

C. Mitterer, J. Zalesak, M. Tkadletz, 2020 .

Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

C. Mitterer, R. Pitonak, J. Zalesak, 2016 .

Dry-Blasting of α- and κ-Al2O3 CVD Hard Coatings: Friction Behaviour and Thermal Stress Relaxation

C. Mitterer, N. Schalk, C. Czettl, 2013, Tribology Letters.

Investigation of the properties of Al1−xCrxN coatings prepared by cathodic arc evaporation

B. Sartory, V. Derflinger, A. Reiter, 2005 .

Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

M. Burghammer, R. Pitonak, B. Sartory, 2014 .

Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

C. Mitterer, R. Franz, R. Tessadri, 2009 .

Structure–property relations of arc-evaporated Al–Cr–Si–N coatings

C. Mitterer, R. Tessadri, B. Sartory, 2008 .

Micro- and bonding structure of arc-evaporated AlCrVN hard coatings

C. Mitterer, R. Franz, R. Tessadri, 2008 .

Oxidation of arc-evaporated Al1−xCrxN coatings

C. Mitterer, B. Sartory, A. Reiter, 2007 .

Semi-quantitative chemical analysis of hard coatings by Raman micro-spectroscopy: the aluminium chromium nitride system as an example

C. Mitterer, R. Franz, R. Tessadri, 2007, Analytical and bioanalytical chemistry.

High-temperature low-friction properties of vanadium-alloyed AlCrN coatings

C. Mitterer, R. Franz, R. Tessadri, 2006 .

Accurate Determination of Trace Amounts of Oxygen in CrAlN Hard Coatings by a Combination of WDS–EPMA and SIMS

R. Tessadri, K. Mayerhofer, B. Sartory, 2006 .

Structural investigations of aluminum-chromium-nitride hard coatings by Raman micro-spectroscopy

C. Mitterer, R. Franz, R. Tessadri, 2006 .

High resolution determination of local residual stress gradients in single- and multilayer thin film systems

H. Gänser, J. Michler, R. Brunner, 2016 .

Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

M. Petrenec, J. Zalesak, B. Sartory, 2016 .

X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

M. Burghammer, B. Sartory, J. Keckes, 2016, Journal of applied crystallography.

Macroscopically‐Zoned Grandite from the Garnetite Skarn of Meka Presedla (Kopaonik Mountain, Serbia)

B. Sartory, R. Kaindl, P. Vulić, 2012 .

Nanocomposite Ti–B–N coatings synthesized by reactive arc evaporation

C. Mitterer, R. Tessadri, B. Sartory, 2006 .

Corrosion of Stainless Steel by Urea at High Temperature

B. Sartory, G. Mori, Anastasiia Galakhova, 2021, Corrosion and Materials Degradation.

Characterisation and quantification of cavities in 9Cr martensitic steel for power plants

S. D. Yadav, C. Poletti, C. Sommitsch, 2015 .

Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/ SiOx multilayers

C. Mitterer, J. Zalesak, B. Sartory, 2016 .

Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

M. Burghammer, C. Mitterer, J. Zalesak, 2017 .

Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

C. Mitterer, R. Pitonak, B. Sartory, 2013 .

Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics

M. Burghammer, J. Zalesak, H. Sternschulte, 2019, Carbon.

Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

F. F. Chamasemani, R. Brunner, B. Sartory, 2021 .

Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

C. Mitterer, Jun Lu, L. Hultman, 2015 .

Cu diffusion in single-crystal and polycrystalline TiN barrier layers: A high-resolution experimental study supported by first-principles calculations

P. Puschnig, C. Mitterer, A. Bochkarev, 2015 .

Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy.

M. Burghammer, N. Schell, A. Stark, 2019, Nanoscale.

Matching in-situ and ex-situ recorded stress gradients in an AlxGa1 − xN Heterostructure: Complementary wafer curvature analyses in time and space

B. Sartory, W. Ecker, J. Keckes, 2018 .

30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film

M. Burghammer, C. Mitterer, J. Zalesak, 2018 .

FIB and Wedge Polishing Sample Preparation for TEM Analysis of Sol-Gel Derived Perovskite Thin Films

B. Sartory, D. Kiener, M. Deluca, 2022, Ceramics.

Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization

C. Mitterer, B. Sartory, J. Keckes, 2015 .

TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

C. Mitterer, Jun Lu, L. Hultman, 2016 .

Enhanced Ti0.84Ta0.16N diffusion barriers, grown by a hybrid sputtering technique with no substrate heating, between Si(001) wafers and Cu overlayers

C. Mitterer, I. Petrov, Jun Lu, 2018, Scientific Reports.

Influence of B content on microstructure, phase composition and mechanical properties of CVD Ti(B,N) coatings

N. Schalk, M. Tkadletz, C. Czettl, 2022, Materialia.

In-situ Observation of Cross-Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

C. Mitterer, B. Sartory, W. Ecker, 2016, Scientific Reports.

Redeposition layer formation caused by shading effect during sputter cleaning and associated damage on rake face of TiN coated high-speed steel drills

B. Sartory, T. Klünsner, F. Nahif, 2022, Surface and Coatings Technology.

Oxidation and diffusion processes during annealing of AlCrVN hard coatings

C. Mitterer, R. Franz, R. Tessadri, 2008 .

Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering

C. Mitterer, B. Sartory, J. Neidhardt, 2008 .

On the existence of a second modification of K4SrSi3O9 – X-ray single crystal diffraction, Raman spectroscopical and high temperature studies

B. Sartory, R. Kaindl, V. Kahlenberg, 2007 .

Na8.25Y1.25Si6O18 and its family of zwölfer ring silicates

J. Konzett, D. Többens, B. Sartory, 2008 .

Zirconium Carbide Mediates Coke-Resistant Methane Dry Reforming on Nickel-Zirconium Catalysts.

M. Kunz, A. Gurlo, S. Penner, 2022, Angewandte Chemie.

Correlative characterization of primary Al3(Sc,Zr) phase in an Al–Zn–Mg based alloy

S. Wurster, M. Albu, F. Hofer, 2015 .

Tribological properties of Al2O3 hard coatings modified by mechanical blasting and polishing post-treatment

C. Mitterer, N. Schalk, C. Czettl, 2012 .

Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

M. Petrenec, R. Pitonak, J. Zalesak, 2017 .

Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

C. Mitterer, M. Motylenko, N. Schalk, 2019, Acta Materialia.

Increased thermal stability of Ti1 − xAlxN/TiN multilayer coatings through high temperature sputter deposition on powder-metallurgical high-speed steels

K. Chladil, C. Mitterer, B. Sartory, 2014 .

Redistribution of C in a Martensite/Austenite Assembly Resulting from Q&P Processing: Computational Modeling Supported by Experiments

T. Klein, B. Sartory, G. Ressel, 2019, Metallurgical and Materials Transactions A.

A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

C. Mitterer, B. Sartory, J. Keckes, 2014 .

The Effect of Loading during Martensitic Transformation of a Maraging Steel after Prior Austenite Grain Size Refinement by Thermal Cycling

T. Antretter, U. Ehlenbröker, B. Sartory, 2019, Practical Metallography.

The chemical composition of tetrahedrite-tennantite ores from the prehistoric and historic Schwaz and Brixlegg mining areas (North Tyrol, Austria)

B. Sartory, R. Kaindl, P. Tropper, 2011 .

Friction reduction by thermal treatment of arc evaporated TiAlTaN coatings in methane

C. Mitterer, I. Letofsky-Papst, N. Schalk, 2013 .

Functional Thin Films for Display and Microelectronics Applications

C. Mitterer, R. Franz, N. Schalk, 2015, BHM Berg- und Hüttenmännische Monatshefte.

Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe–25%Co–15%Mo tool material

C. Mitterer, B. Sartory, A. Fian, 2012 .

The roles of Eu during the growth of eutectic Si in Al-Si alloys

Q. Ramasse, L. Romaner, Jiehua Li, 2015, Scientific Reports.

Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, residual stress and property gradients

J. J. Saurwalt, N. Schell, J. Zalesak, 2020, Additive Manufacturing.

The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior

C. Mitterer, I. Letofsky-Papst, M. Tkadletz, 2014 .

Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)

B. Sartory, W. Ecker, J. Keckes, 2017 .

Reactively sputtered TiN/SiO2 multilayer coatings with designed anisotropic thermal conductivity – From theoretical conceptualization to experimental validation

C. Mitterer, N. Schalk, M. Tkadletz, 2020 .

Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

C. Mitterer, B. Sartory, J. Keckes, 2014 .

Mechanical property enhancement in laminates through control of morphology and crystal orientation

M. Burghammer, B. Sartory, J. Keckes, 2015 .

Mineralogy , mineral chemistry and petrology of the Ag-bearing Cu-Fe-Pb-Zn sulfide mineralizations of the Pfunderer Berg ( South Tyrol , Italy )

B. Sartory, P. Tropper, Matthias Krismer, 2022 .

Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients

N. Schell, B. Sartory, W. Ecker, 2021, Journal of Materials Research and Technology.

Pivotal Role of Ni/ZrO2 Phase Boundaries for Coke-Resistant Methane Dry Reforming Catalysts

M. Kunz, A. Gurlo, S. Penner, 2023, Catalysts.

Metallization defect detection in 3D integrated components using scanning acoustic microscopy and acoustic simulations

René Hammer, Franz Schrank, Jördis Rosc, 2018, Microelectron. Reliab..

Enhanced Ti0.84Ta0.16N diffusion barriers, grown by a hybrid sputtering technique with no substrate heating, between Si(001) wafers and Cu overlayers

C. Mitterer, I. Petrov, Jun Lu, 2018, Scientific Reports.

Resolving depth evolution of microstructure and hardness in sputtered CrN film

C. Mitterer, B. Sartory, J. Keckes, 2015 .

Wear-resistant Ti–B–N nanocomposite coatings synthesized by reactive cathodic arc evaporation

C. Mitterer, R. Tessadri, B. Sartory, 2010 .

High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer

J. Kraft, B. Sartory, J. Keckes, 2017 .

Detwinning Phenomenon and Its Effect on Resulting Twinning Structure of an Austenitic Hadfield Steel

S. Eck, B. Sartory, G. Ressel, 2023, Metallurgical and Materials Transactions A.

Influence of spinodal decomposition and fcc→w phase transformation on global and local mechanical properties of nanolamellar CVD fcc-Ti1-xAlxN coatings

C. Mitterer, N. Schell, A. Stark, 2020 .

Local residual stresses in tungsten coated TSVs characterized by synchrotron X-ray nanodiffraction and Raman spectroscopy

M. Burghammer, B. Sartory, J. Keckes, 2014, Proceedings of the 5th Electronics System-integration Technology Conference (ESTC).

Nonlinear Lock-In Infrared Microscopy: A Complementary Investigation Technique for the Analysis of Functional Electroceramic Components

B. Sartory, P. Supancic, M. Hofstätter, 2015, Microscopy and Microanalysis.

Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts

C. Mitterer, M. Gassner, N. Schalk, 2017 .