K. Maier

发表

Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including stress-strain curves for WC as a function of temperature

T. Antretter, C. Czettl, Lukáš Faksa, 2019 .

Defect initiation and accumulation kinetics in hard-coated WC-Co hardmetal under multi-axial loads at elevated temperature in a novel ball-in-cone test setup

C. Czettl, R. Ebner, T. Klünsner, 2022, International Journal of Refractory Metals and Hard Materials.

Combined experimental and numerical analysis of critical loading conditions for hard metal tool damage in titanium milling

J. Wosik, M. Pötz, C. Czettl, 2022, Journal of Manufacturing Processes.

A physical reason for asymmetric creep deformation behaviour of WC-Co hardmetal under tension and compression loading at 700 °C and 800 °C

S. Marsoner, C. Czettl, R. Ebner, 2021 .

Creep behaviour of WC-12 wt% Co hardmetals with different WC grain sizes tested in uniaxial tensile and compression step-loading tests at 700 °C and 800 °C

S. Marsoner, C. Czettl, R. Ebner, 2021 .

Damage indicators for early fatigue damage assessment in WC-Co hardmetals under uniaxial cyclic loads at a stress ratio of R = −1 at elevated temperatures

S. Marsoner, C. Czettl, R. Ebner, 2021, International Journal of Refractory Metals and Hard Materials.

Strain ratcheting limit stresses as a function of microstructure of WC-Co hardmetals under uniaxial cyclic loads under a stress ratio of R = −∞ at elevated temperatures

S. Marsoner, C. Czettl, R. Ebner, 2022, International Journal of Refractory Metals and Hard Materials.

On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature

R. Pippan, S. Marsoner, C. Czettl, 2022, Acta Materialia.

Investigation of fatigue cracks in aluminium alloys 2024 and 6013 in laboratory air and corrosive environment

G. Tempus, K. Maier, C. Zamponi, 2004 .

Aircraft Engine Oils and Their Behaviour at High Temperatures

K. Maier, 1986 .

Determination of spontaneous ignition temperatures of ester-based aviation lubricants using pressure differential scanning calorimetry (PDSC)

A. Zeman, K. Maier, A. Basken, 1998 .

Self-lubricating chromium carbide/amorphous hydrogenated carbon nanocomposite coatings: A new alternative to tungsten carbide/amorphous hydrogenated carbon

B. Pécz, K. Maier, E. Bergmann, 2009 .

Uniaxial step loading test setup for determination of creep curves of oxidation-sensitive high strength materials in vacuum under tensile and compressive load

C. Tritremmel, S. Marsoner, C. Czettl, 2020 .

Surface treatments and substrate-coating interface effects on damage accumulation kinetics in hard-coated WC-Co hardmetals under cyclic multi-axial high-temperature loading

S. Marsoner, C. Czettl, T. Klünsner, 2023, International Journal of Refractory Metals and Hard Materials.