Delong Cai

L. Geng, Delong Cai, X. Cui, 2022, Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada.

Thermal evolution of lithium ion substituted cesium-based geopolymer under high temperature treatment, Part I: Effects of holding temperature

Zhihua Yang, Yu Zhou, X. Duan, 2018, Ceramics International.

Novel geopolymer based composites reinforced with stainless steel mesh and chromium powder

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

In situ processing of MWCNTs/leucite composites through geopolymer precursor

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effects of Li Substitution on the Microstructure and Thermal Expansion Behavior of Pollucite Derived from Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Ti–6Al–4V and TiB/Ti–6Al–4V composite: A comparative study

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Preparation and anisotropic properties of textured structural ceramics: A review

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of Advanced Ceramics.

Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Crystallization Kinetics, Properties of α-cordierite Based Glass-ceramics Prepared by Glass Powder Sintering

Zhihua Yang, D. Jia, Lifen Shi, 2022, Journal of Inorganic Materials.

Thermal shock and ablation behavior of α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, D. Jia, Delong Cai, 2019 .

Insight into hexacelsian-to-celsian transformation in hot-pressed BN/BAS composites

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Oxidation kinetic behavior of SiBCN-Ta4HfC5 ceramics at 1600 oC

Zhihua Yang, D. Jia, Daxin Li, 2022, Corrosion Science.

Study on oxidation resistance and oxidative damage mechanism of SiBCN-Ta4HfC5 composite ceramics

Yu Zhou, D. Jia, Daxin Li, 2021, Corrosion Science.

Effect of Re2O3–MgO additives on the microstructure evolution and properties of β-Si3N4 ceramics

Yu Zhou, D. Jia, Delong Cai, 2021 .

Thermal properties and thermal shock resistance of BAS-BN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Advanced Ceramics.

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Microstructural evolution and mechanical properties of in situ nano Ta4HfC5 reinforced SiBCN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Advanced Ceramics.

Dense amorphous Si2BC1-4N monoliths resistant to high-temperature oxidation for hypersonic vehicle

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Effects of TaC addition on microstructure and mechanical properties of SiBCN composite ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2019 .

In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: Processing, microstructure, mechanical properties and oxidation behavior

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of Alloys and Compounds.

High-temperature oxidation resistance of dense amorphous boron-rich SiBCN monoliths

Zhihua Yang, Yu Zhou, X. Duan, 2019, Corrosion Science.

Rheology of organics-free aqueous ceramic suspensions for additive manufacturing of dense silicon nitride ceramics

Zhihua Yang, D. Jia, Delong Cai, 2022, Ceramics International.

A facile strategy for fabricating self-sealing dense coating grown in-situ on porous silicon nitride ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Mo–SiBCN metal-ceramic composites with enhanced and tunable thermophysical properties and thermal shock resistance

Zhihua Yang, Yu Zhou, B. Liang, 2021, Ceramics International.

SiC fiber reinforced geopolymer composites, part 1: Short SiC fiber

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics

J. Hosson, Zhihua Yang, Yu Zhou, 2017 .

Preparation and mechanical properties of laminated B4C–TiB2/BN ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2021, Ceramics International.

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of the European Ceramic Society.

A comparative study on high temperature oxidation behavior of SiC, SiC-BN and SiBCN monoliths

Zhihua Yang, Qingqing Chen, D. Jia, 2021, Corrosion Science.

Synthesis of coatings on SiC fibers and their effects on microstructure and mechanical properties of SiC f /SiBCN composites

Zhihua Yang, Daxin Li, Delong Cai, 2021, Journal of the American Ceramic Society.

Effects of sintering temperature on the microstructure and properties of h-BN ceramics with MAS as liquid sintering aid

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

MAS-content dependence of the texture and fracture behavior of h-BN-MAS composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Effect of the BN content on the thermal shock resistance and properties of BN/SiO2 composites fabricated from mechanically alloyed SiBON powders

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

In-situ formation of bulk and porous h-AlN/SiC-based ceramics from geopolymer technique

Zhihua Yang, Yu Zhou, X. Duan, 2019 .

Hot-press sintering studies of sol-gel-prepared composite powders: A novel preparation method to improve mechanical properties of BN-BAS composite ceramics

Zhihua Yang, D. Jia, Daxin Li, 2022, Ceramics International.

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016, Journal of Materials Science.

Thermal shock resistance of the porous boron nitride/silicon oxynitride ceramic composites

Zhihua Yang, Yu Zhou, D. Jia, 2018, International Journal of Applied Ceramic Technology.

The preparation, microstructure and mechanical properties of a dense MgO–Al2O3–SiO2 based glass-ceramic coating on porous BN/Si2N2O ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2018, RSC advances.

Fabrication and properties of dense α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of the European Ceramic Society.

Effect of holding time on microstructure, mechanical, water resistance and dielectric properties of α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, Yu Zhou, D. Jia, 2018, Ceramics International.

Effects of pore structures on the dielectric properties of silicon nitride-based ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Quasi-static and dynamic compressive behavior of BN-BAS composite ceramic at room temperature and 1000 °C

Zhihua Yang, D. Jia, Daxin Li, 2022, Ceramics International.

The New Complex High-entropy Metal Boron Carbonitride: Microstructure and Mechanical Properties

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Synthesis and thermal stability of novel high-entropy metal boron carbonitride ceramic powders

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Finite element analysis of effect of grain orientation on the thermal conduction of h-BN ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

First-principles study of the anisotropic thermal expansion and thermal transport properties in h-BN

Zhihua Yang, Yu Zhou, X. Duan, 2020, Science China Materials.

Improvement of grain size and crystallization degree of LPSed h-BN composite ceramics by amorphization/nanocrystallization of raw h-BN powders

Zhihua Yang, Yu Zhou, X. Duan, 2021 .

Influence of sintering temperature on the crystallization and mechanical properties of BN‐MAS composites

D. Jia, Daxin Li, Yu Zhou, 2022, Journal of The American Ceramic Society.

Large-size Si3N4 ceramic fabricated by additive manufacturing using long-term stable hydrogel-based suspensions

Zhihua Yang, Yu Zhou, D. Jia, 2023, Additive Manufacturing.

Effect of Si2BC3N additions on the oxidation of Ta4HfC5 ceramics at 900–1100 °C

Zhihua Yang, Daxin Li, Delong Cai, 2023, Corrosion Science.

Thermal shock damage assessment of a BNW/SiO2 ceramic: Insight from temperature-dependent material properties

Zhihua Yang, Yu Zhou, D. Jia, 2021, Ceramics International.

Effect of boron nitride content on mechanical、dielectric and thermal shock resistance properties of Si3N4-BN-MAS composites

Zhihua Yang, Delong Cai, Qishuai Zhu, 2024, Ceramics International.

A process-structure-property model via physics-based/data-driven hybrid methods for freeze-cast porous ceramics in Si3N4-Si2N2O case system

Zhihua Yang, Xingqi Liao, Delong Cai, 2024, Acta Materialia.