Shengjin Wang

发表

Ablation behavior and mechanism of boron nitride - magnesium aluminum silicate ceramic composites in an oxyacetylene combustion flame

Zhihua Yang, Yu Zhou, X. Duan, 2018 .

Fabrication and Characterization of In Situ Porous Si3N4‐Si2N2O‐BN Ceramic

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

Effect of starting PMMA content on microstructure and properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures

Zhihua Yang, Yu Zhou, X. Duan, 2013, Journal of Materials Science.

Dense, pure SiC monoliths with excellent oxidation resistance sintered at low temperatures and high pressures

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Effect of curing temperature and SiO2/K2O molar ratio on the performance of metakaolin-based geopolymers

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effects of treatment temperature on the reduction of GO under alkaline solution during the preparation of graphene/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effect of reduced graphene oxide content on the microstructure and mechanical properties of graphene–geopolymer nanocomposites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Inhibiting crystallization mechanism of h-BN on α-cordierite in BN-MAS composites

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Zhihua Yang, Z. Wang, Yu Zhou, 2016 .

In-situ preparation of fully stabilized graphene/cubic-leucite composite through graphene oxide/geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effects of graphene oxide on the geopolymerization mechanism determined by quenching the reaction at intermediate states

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Effect of fiber content on the microstructure and mechanical properties of carbon fiber felt reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Boron‐dependent microstructural evolution, thermal stability, and crystallization of mechanical alloying derived SiBCN

Zhihua Yang, Yu Zhou, Qingqing Chen, 2018 .

Effects of pore size on microstructure, mechanical and dielectric properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Crystallization kinetics and microstructure evolution of reduced graphene oxide/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effects of high pressure on the low-temperature sintering of dense amorphous SiBCN monoliths

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of the European Ceramic Society.

Effects of Na+ substitution Cs+ on the microstructure and thermal expansion behavior of ceramic derived from geopolymer

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Thermal evolution of lithium ion substituted cesium-based geopolymer under high temperature treatment, Part I: Effects of holding temperature

Zhihua Yang, Yu Zhou, X. Duan, 2018, Ceramics International.

Novel geopolymer based composites reinforced with stainless steel mesh and chromium powder

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

In situ processing of MWCNTs/leucite composites through geopolymer precursor

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effects of Li Substitution on the Microstructure and Thermal Expansion Behavior of Pollucite Derived from Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Microstructure and integrity of leucite ceramic derived from potassium-based geopolymer precursor

D. Jia, Shengjin Wang, P. He, 2013 .

Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

Progress on the formation of ceramics and ceramic-based composites through geopolymer precursors

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Tailoring a novel network reinforcement architecture exploiting superior tensile properties of in situ TiBw/Ti composites

L. Geng, Yu Dong, Yuzi Zhang, 2012 .

Low volume fraction in situ (Ti5Si3 + Ti2C)/Ti hybrid composites with network microstructure fabricated by reaction hot pressing of Ti–SiC system

L. Geng, Shengjin Wang, L. Huang, 2013 .

Fabrication of gel cast BN/Si3N4 composite ceramics from surface-coated BN powder

Yu Zhou, D. Jia, Shengjin Wang, 2015 .

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Dense amorphous Si2BC1-4N monoliths resistant to high-temperature oxidation for hypersonic vehicle

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Effects of boron addition on the high temperature oxidation resistance of dense sSiBCN monoliths at 1500 °C

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

High-temperature oxidation resistance of dense amorphous boron-rich SiBCN monoliths

Zhihua Yang, Yu Zhou, X. Duan, 2019, Corrosion Science.

Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Effect of h-BN on the mechanical and dielectric properties of porous h-BN/Si3N4 composite ceramics prepared by gel casting

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

High-temperature oxidation behavior of dense SiBCN monoliths: Carbon-content dependent oxidation structure, kinetics and mechanisms

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effects of in situ amorphous graphite coating on ablation resistance of SiC fiber reinforced SiBCN ceramics in an oxyacetylene flame

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Microstructure, oxidation and thermal shock resistance of graphene reinforced SiBCN ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2016 .

SiC fiber reinforced geopolymer composites, part 1: Short SiC fiber

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

In situ fabrication and characterization of graphene/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2015 .

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Ion sputtering erosion mechanisms of h-BN composite ceramics with textured microstructures

Daren Yu, Zhihua Yang, Yu Zhou, 2014 .

Effect of the BN content on the thermal shock resistance and properties of BN/SiO2 composites fabricated from mechanically alloyed SiBON powders

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effect of solid contents on the mechanical properties of SiC–10 wt.%AlN ceramic composites prepared by gelcasting

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Crystallization Behavior of Amorphous Si2BC3N Ceramic Monolith Subjected to High Pressure

Zhihua Yang, Yu Zhou, X. Duan, 2015 .