I. Figueroa

发表

Magnetic properties of bulk composite FeBSiM (M=Cr,Zr) alloys with high microhardness

S. Báez, I. Betancourt, M. E. Hernandez-Rojas, 2010 .

Manufacturing, Mechanical and Electrochemical Characterization of Zr-Based Amorphous Ribbons

A. Escamilla, I. Figueroa, J. Verduzco, 2020, Microscopy and Microanalysis.

Elastic properties of some bulk metallic glasses

I. Todd, I. Figueroa, R. Hand, 2009 .

Microstructural and Mechanical Study of the Al–20Sn (mass%) Alloy Processed by Equal-Channel Angular Pressing by Route C

C. Braham, I. Figueroa, G. Gonzalez, 2013 .

Influence of the as-cast and cold rolled microstructural conditions over corrosion resistance in an advanced TWIP steel microalloyed with boron

I. Figueroa, G. Guerrero, J. F. Álvarez, 2020 .

Numerical and experimental study of a 5754-aluminum alloy processed by heterogeneous repetitive corrugation and straightening

C. Braham, J. Cabrera, I. Figueroa, 2020 .

Texture and Lattice Distortion Study of an Al-6061-T6 Alloy Produced by ECAP

C. Braham, J. Cabrera, I. Figueroa, 2015 .

Improved Processing of Titanium Alloys by Metal Injection Moulding

I. Todd, I. Figueroa, A. T. Sidambe, 2011, MSE 2011.

Effect of the Cu addition on the mechanical properties and microstructure of open-cell Al foams

I. Figueroa, G. Gonzalez, O. Novelo-Peralta, 2021, Journal of Materials Research.

Production of al foams using the SDP method: Processing parameters and introduction of a new sintering device

I. Figueroa, G. Gonzalez, O. Novelo-Peralta, 2016 .

Assessment of the flow behavior and structural performance of open-cell aluminum foams at critical flow conditions of pressure and temperature

I. Figueroa, G. Gonzalez, I. Alfonso, 2021, Journal of Materials Research.

Metallic glass formation in the binary Cu–Hf system

I. Todd, I. Figueroa, J. Plummer, 2013, Journal of Materials Science.

Inhibition of acid corrosion in API 5L X52 steel with 1,2,3-triazole derivatized from benzyl alcohol: Experimental and theoretical studies

M. Castro, I. Figueroa, L. Huerta, 2021 .

Effect of the microstructure generated by Repetitive Corrugation and Straightening (RCS) process on the mechanical properties and stress corrosion cracking of Al-7075 alloy

J. Cabrera, I. Figueroa, L. Romero-Resendiz, 2021, Journal of Materials Research and Technology.

Effect of the initial ECAP passes on crystal texture and residual stresses of 5083 aluminum alloy

Ismeli Alfonso, Gonzalo Gonzalez, C. Braham, 2020, International Journal of Minerals, Metallurgy and Materials.

Corrosion inhibition assessment on API 5L X70 steel by preussomerin G immersed in saline and saline acetic

M. Figueroa, M. Castro, I. Figueroa, 2020 .

Effect of Small Additions of Cr, Ti, and Mn on the Microstructure and Hardness of Al–Si–Fe–X Alloys

I. Figueroa, G. Gonzalez, G. Lara-Rodríguez, 2019, Metals.

Effects of corrosion inhibition with xanthines in gray cast iron protection with Paraloid B-72 in a saline medium

D. Molina, I. Figueroa, A. Espinoza Vázquez, 2021 .

Study of the microstructure and mechanical properties of Al-Si-Fe with additions of chromium by suction casting

I. Figueroa, G. Gonzalez, I. Alfonso, 2021 .

Synthesis by Microwaves of Bimetallic Nano-Rhodium-Palladium

I. Figueroa, E. Chavira, M. T. Ochoa-Lara, 2013 .

Influence of the Glassy Fraction Surface of a ZrCoAlAg Ribbon Alloy on the Bioactive Response to Simulated Body Fluid and Its Effect on Cell Viability

A. Escamilla, I. Figueroa, J. Verduzco, 2022, Metals.

Phase stability, microstructure and mechanical properties of Li containing Mg-based bulk metallic glass composites

I. Todd, I. Figueroa, J. Plummer, 2012 .

Fractal and Conventional Analysis of Cu Content Effect on the Microstructure of Al-Si-Cu-Mg Alloys

I. Figueroa, C. Aguilar, L. Béjar, 2020, Materials Research.

Fractal analysis of the heat treatment response for multiphase Al alloys

I. Figueroa, G. Gonzalez, C. Aguilar, 2016 .

Microstructure evolution in rapidly solidified Y added TiAl ribbons

Yuyong Chen, I. Figueroa, H. A. Davies, 2011 .

A replication-casting device for manufacturing open-cell Mg foams

R. Goodall, I. Figueroa, O. Novelo-Peralta, 2017 .

Manufacturing of open-cell Mg foams by replication process and mechanical properties

R. Goodall, I. Figueroa, G. Lara-Rodríguez, 2014 .

Influence of minor alloying additions on the glass-forming ability of Mg-Ni-La bulk metallic glasses

I. Todd, I. Figueroa, S. González, 2009 .

Development of pure Mg open-cell foams as structured CO2 captor

H. Pfeiffer, B. Alcántar-Vázquez, I. Figueroa, 2015 .

Synthesis of belite cements at low temperature from silica fume and natural commercial zeolite

I. Figueroa, C. Escobedo, E. Chelala, 2017 .

Estimation of elastic moduli of particulate-reinforced composites using finite element and modified Halpin–Tsai models

I. Figueroa, L. Béjar, C. Patiño-Carachure, 2016 .

Young’s modulus estimation based on high symmetry 3-D finite element model for metal matrix composites

I. Figueroa, G. Gonzalez, M. Abatal, 2013 .

Residual stresses and microstructural evolution of ECAPed AA2017

C. Braham, J. Cabrera, I. Figueroa, 2019, Materials Characterization.

Spark Plasma Sintering Techniques Improve the Properties of AlN-TiB2 Ceramics with Nb2O5, Y2O3 and ZrO2 as a Sintering Precursors

M. Villafuerte-Castrejón, I. Figueroa, Miguel A Rodríguez, 2019 .

Mechanical behavior of heat-treated Al-Cu-Mg open-cell foams

I. Figueroa, O. Novelo-Peralta, G. Lara-Rodríguez, 2021 .

Enhanced CO 2 capture capacity on open-cell Mg foams via humid impregnation with lithium at low temperatures

H. Pfeiffer, J. Gómez-García, I. Figueroa, 2018, Thermochimica Acta.

Nano hydroxyapatite crystals obtained by colloidal solution

I. Figueroa, M. Piña-Barba, C. Flores-Morales, 2011 .

Microstructural Evolution and Mechanical Behavior of an Al-6061 Alloy Processed by Repetitive Corrugation and Straightening

C. Braham, J. Cabrera, I. Figueroa, 2020, Metals.

Glass formation in a high entropy alloy system by design

Iain Todd, I. Todd, I. Figueroa, 2012 .

Development of AlN and TiB2 Composites with Nb2O5, Y2O3 and ZrO2 as Sintering Aids

M. Villafuerte-Castrejón, I. Figueroa, Miguel A Rodríguez, 2017, Materials.

Production of aluminum foams with hierarchical porosity by a combination of two different manufacturing methods

I. Figueroa, C. Aguilar, L. Béjar, 2020 .

Characterization of Al-Si-Cu-Mg foams manufactured in-situ

I. Figueroa, G. Gonzalez, C. Aguilar, 2017 .

A novel solid state method for manufacturing Al foams by over solution heat treatment

I. Figueroa, G. Gonzalez, C. Aguilar, 2016 .

FEA evaluation of the Al4C3 formation effect on the Young’s modulus of carbon nanotube reinforced aluminum matrix composites

I. Figueroa, G. Gonzalez, C. Aguilar, 2015 .

Production of Al–Cu–Fe metallic foams without foaming agents or space holders

I. Figueroa, G. Gonzalez, O. Novelo-Peralta, 2014 .

Influence of Boron Content on the Solidification Structure, Magnetic Properties and Hot Mechanical Behavior in an Advanced As-Cast TWIP Steel

I. Figueroa, A. Barba-Pingarrón, A. Bolarín-Miró, 2020, Metals.

Transition from high-entropy to conventional (TiZrNbCu)1−xCox metallic glasses

I. Figueroa, P. Pervan, K. Zadro, 2021, Journal of Applied Physics.

Bulk glass formation and mechanical properties for Cu–Hf–Ti–M (M = B,Y) alloys

I. Todd, P. Carroll, I. Figueroa, 2007 .

Microstructure and Texture of Al-2Si-xSn (x=0,4,8 mass%) Alloys Processed by Equal Channel Angular Pressing

J. Lebrun, C. Braham, Y. Chastel, 2012 .

Study of the Mechanical-Photoacoustic Properties of Thermally Modified Al-6061-T6

I. Figueroa, R. Castañeda-Guzmán, O. Novelo-Peralta, 2021, Physics of Metals and Metallography.

Hardness-Lattice Parameter Correlation for Aged Al-Zn-Mg Alloys

I. Figueroa, G. Gonzalez, I. Alfonso, 2010 .

Electronic structure and glass forming ability in early and late transition metal alloys

E. Babić, Ž. Skoko, D. Pajić, 2017, 1706.03332.

A study of mechanical homogeneity in as-cast bulk metallic glass by nanoindentation

I. Todd, R. Goodall, I. Figueroa, 2011 .

Synthesis and characterization of biocompatible-nanohydroxyapatite crystals obtained by a modified sol-gel processing

I. Figueroa, M. Piña-Barba, O. Novelo-Peralta, 2012, Biomatter.

Looking for footprint of bulk metallic glass in electronic and phonon heat capacities of Cu55Hf45−xTix alloys

E. Babić, D. Starešinić, I. Figueroa, 2014 .

Simple correlation between mechanical and thermal properties in TE–TL (TE = Ti,Zr,Hf;TL = Ni,Cu) amorphous alloys

I. Todd, E. Babić, I. Figueroa, 2011 .

Properties and atomic structure of amorphous early transition metals

I. Todd, E. Babić, D. Pajić, 2010 .

Transition from high-entropy to Cu-based (TiZrNbNi)1−xCux metallic glasses

E. Babić, D. Pajić, I. Figueroa, 2019, Journal of Applied Physics.

Structure property relationship in (TiZrNbCu)_1−xNi_x metallic glasses

D. Starešinić, I. Figueroa, Vesna Mikvsi'c Trontl, 2018, Journal of Materials Research.

Properties of (TiZrNbCu)_1-xNi_x Metallic Glasses

I. Figueroa, G. Reményi, D. Starevsini'c, 2017, 1708.06171.

Change of electronic properties on transition from high-entropy to Ni-rich (TiZrNbCu)1−xNi alloys

I. Figueroa, P. Pervan, E. Tafra, 2019, Journal of Non-Crystalline Solids.

Electronic structure and properties of (TiZrNbCu)1-xNix high entropy amorphous alloys

I. Figueroa, G. Reményi, D. Starevsini'c, 2016, 1611.06091.

Mechanical and magnetic properties of Cu55Hf45−xTix metallic glasses

I. Todd, E. Babić, D. Pajić, 2011 .

Influence of minor additions of Si on the crystallization kinetics of Cu55Hf45 metallic glasses

I. Figueroa, G. Gonzalez, O. Lozada-Flores, 2018 .

Crystallization kinetics of Cu55Hf45 glassy alloy

I. Figueroa, G. Gonzalez, J. Verduzco, 2017 .

Effect of mischmetal substitution on the glass-forming ability of Mg–Ni–La bulk metallic glasses

I. Todd, I. Figueroa, P. Adeva, 2009 .

Determination of Chemical Composition of Compounds in Lead-Free Solder Alloy Sn-Zn-Al Using SEM/EDS

I. Figueroa, O. Novelo-Peralta, G. Lara-Rodríguez, 2020, Metallography, Microstructure, and Analysis.

Magnetic Properties of Metal - Polymer Composites for Ac Applications at High Frequencies

I. Figueroa, L. Olmos, V. López, 2017 .

Residual stress distribution of a 6061-T6 aluminum alloy under shear deformation

C. Braham, J. Cabrera, I. Figueroa, 2016 .

Microstructure and Texture Evolution of the Al-20Sn Alloy Processed by Equal-Channel Angular Pressing Using Route C

C. Braham, I. Figueroa, G. Gonzalez, 2015 .

The effect of oxygen pickup during selective laser melting on the microstructure and mechanical properties of Ti–6Al–4V lattices

I. Todd, E. Hernández-Nava, R. Goodall, 2019, Heliyon.

Microstructural and Mechanical Analysis of an 1100 Aluminum Alloy Processed by Repetitive Corrugation and Straightening

I. Figueroa, G. Gonzalez, E. Alvarado, 2020, Physics of Metals and Metallography.

Effect of B, Si and Cr on the mechanical properties of Fe-based amorphous metallic ribbons

I. Betancourt, I. Figueroa, J. Verduzco, 2005 .

Thermal Properties of Cu-Hf-Ti Metallic Glass Compositions

I. Figueroa, 2012 .

High glass formability for Cu–Hf–Ti alloys with small additions of Y and Si

I. Todd, I. Figueroa, H. A. Davies, 2009 .

Glass formation, thermal and mechanical properties of ZrCuAlNi bulk metallic glasses

I. Figueroa, M. Estrada, J. Verduzco, 2018, Transactions of Nonferrous Metals Society of China.

Formation of Cu–Hf–Ti bulk metallic glasses

I. Todd, I. Figueroa, H. Davies, 2007 .

Formation of Cu—Hf—Ti Bulk Metallic Glasses.

I. Todd, I. Figueroa, H. Davies, 2007 .

New evidence on the nature of the metastable S″-phase on Al–Cu–Mg alloys

I. Figueroa, G. Gonzalez, O. Novelo-Peralta, 2011 .

Effect of Mo on High Entropy Ti-Nb-Zr-Ta alloy: phase equilibria, microstructure and mechanical properties

V. Amigó, I. Figueroa, G. Gonzalez, 2023, Journal of Alloys and Compounds.

Metal injection moulding of CP-Ti components for biomedical applications

I. Todd, I. Figueroa, A. T. Sidambe, 2012 .

Preparation of rhodium nano-particles using microwaves

I. Figueroa, E. Chavira, M. T. Ochoa-Lara, 2013, Journal of Sol-Gel Science and Technology.

Glass Formation of Null-Matrix Cu-Hf-(Zr, Ti) Alloys

I. Figueroa, O. Lozada-Flores, 2019, Materials Research.

Study of the Al-Si-X system by different cooling rates and heat treatment

I. Figueroa, A. Cruz, M. Suárez, 2012 .

DEM–FEA estimation of pores arrangement effect on the compressive Young’s modulus for Mg foams

I. Figueroa, C. Aguilar, L. Pérez, 2015 .

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system

I. Todd, I. Figueroa, M. Ismail, 2010 .

Corrosion inhibition of 1-Benzyl-4-((benzyloxy) methyl)-1H-1,2,3-triazole (BBT) for C844 bronze in saline medium and theoretical study

I. Figueroa, A. Miralrio, G. Negrón-Silva, 2022, Journal of Molecular Structure.