K. Whang

发表

Surface pattern formation on Cr thin film with ultrafast laser pulse

Sung-Hak Cho, Jaegu Kim, T. Je, 2010 .

Influence of tool deflection on micro channel pattern of 6:4 brass with rectangular tool

Jaegu Kim, T. Je, D. Choi, 2009 .

Removal of nanoparticles on silicon wafer using a self-channeled plasma filament

Sung-Hak Cho, K. Whang, Ji-Wook Yoon, 2012 .

Micro-cutting with diamond tool micro-patterned by femtosecond laser

Sung-Hak Cho, Jaegu Kim, T. Je, 2014 .

Nano sand filter with functionalized nanoparticles embedded in anodic aluminum oxide templates

Jeong Hwan Kim, Yun Jung Lee, N. Phuong, 2016, Scientific Reports.

Excimer laser ablation removal of thin chromium films from glass substrates

S. Na, K. Whang, Sk Lee, 1999 .

Fabrication of curved micro structures on photoresist layer

Sunghwan Chang, T. Je, D. Choi, 2011 .

Study on the Lateral Piezoelectric Actuator with Actuation Range Amplifying Structure

Y. Seo, D. Choi, K. Whang, 2006 .

Sub-micron scale patterning using femtosecond laser and self-assembled monolayers interaction

Sung-Hak Cho, Jaegu Kim, K. Whang, 2005 .

Micro/Nano Pattern Fabrication Using Ultrafast Laser Surface Modification and Self-Assembled Monolayers

K. Whang, J. Kim, S. Cho, 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

Synthesis of Vertically Aligned Carbon Nanotubes by dc PECVD

T. Je, K. Whang, Wontae Chang, 2006 .

Calculation of CO2 laser beam absorptance as a function of temperature for steels by the numerical method

T. H. Kim, K. Whang, B. Yoo, 1995, Journal of Materials Science.

Surface ripple changes during Cr film ablation with a double ultrashort laser pulse

S. Na, Sung-Hak Cho, Jaegu Kim, 2008 .

Effects of Pulse Delay in Metal Micromachining with Femtosecond Laser Pulses

Sung-Hak Cho, Jaegu Kim, K. Whang, 2006 .

Wetting characteristics of the anodic aluminum oxide template and fabrication of cracks using ultraviolet curable resin solution

Jeong Hwan Kim, N. Phuong, Y. Yoo, 2014 .

Selective lift-off of GaN light-emitting diode from a sapphire substrate using 266-nm diode-pumped solid-state laser irradiation

Kyung-Hyun Whang, Sung-Hak Cho, Jae-Hyun Kim, 2016 .

Induced Drag Characteristics Based on Wake Surface Integration for Wing-In-Ground Effect

J. Kwon, K. Whang, Kyun-Seok Kim, 2010 .

A Study on Micro Manufacturing Technology for 3-Dimensional Micro Parts

K. H. Whang, J. T. Je, D. S. Choi, 2006 .

Laterally driven thin film PZT actuator with high-aspect-ratio silicon beam for stroke amplification

Young Ho Seo, Doo-Sun Choi, Tae-Jin Je, 2006 .

Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology

Bo-Sung Shin, Kyung-Hyun Whang, Doo-Sun Choi, 2001 .

A Study of the Micro Pole Structure Fabrication and Application Technology by Micro End-Milling Process

D. Choi, K. Whang, B. Shin, 2004 .

Photothermal three-dimensional fabrication of polymers using diode-pumped solid state lasers

B. Shin, Jaegu Kim, K. Whang, 2004 .

Rapid Manufacturing of 3D Micro Products by UV Laser Ablation and Phase Change Filling

Kyung-Hyun Whang, B. Shin, K. Whang, 2006 .

Femtosecond-Laser-Coupled Near-Field Scanning Optical Microscopy Patterning Using Self-Assembled Monolayers

Sung-Hak Cho, Jaegu Kim, K. Whang, 2006 .

Nanoscale Patterning Using Femtosecond Laser and Self-assembled Monolayers (SAMs)

Sung-Hak Cho, Jaegu Kim, K. Whang, 2004 .

Localized asymmetric crack closure with stick-slip in the contact

D. Mendelsohn, K. Whang, 1988 .

Partial Release and Relocking of a Frictionally Locked Crack Due to Moving Tensile Loads

D. Mendelsohn, K. Whang, 1988 .

A new rapid manufacturing process for multi-face high-speed machining

Dong-Yol Yang, Bo-Sung Shin, Es Lee, 2003 .

A New Fabrication Method of Nano-Fluidic Filters Using Self-Assembly of Nano-Spheres and Surface Tension

Y. Seo, D. Choi, K. Whang, 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.