D. Vasconcelos

发表

Water and oil wettability of hybrid organic–inorganic titanate–silicate thin films deposited via a sol–gel route

W. L. Vasconcelos, M. Houmard, D. Vasconcelos, 2009 .

Preparation of sol–gel silica samples modified with drying control chemical additives

W. L. Vasconcelos, D. Vasconcelos, E. Nunes, 2015 .

Production and Characterization of a Silica-Alumina Membrane Using Novel Tubular Freeze-Cast Substrates

W. L. Vasconcelos, Bruno M. Sousa, D. D. Athayde, 2019, Materials Research.

Synthetic Aluminosilicates for Geopolymer Production

W. L. Vasconcelos, D. Vasconcelos, M. A. Pereira, 2019, Materials Research.

Infrared Spectroscopy of Titania Sol-Gel Coatings on 316L Stainless Steel

M. Gasparon, W. L. Vasconcelos, D. Vasconcelos, 2011 .

Processing and characterization of sol–gel titania membranes

W. L. Vasconcelos, J. F. Nascimento, D. Vasconcelos, 2012 .

Importance of the Order of Addition of the Alumina Precursor and its Type Into Al-SBA-15 Mesoporous Materials for Use as Water Adsorbents

J. Ribeiro, W. L. Vasconcelos, D. Vasconcelos, 2018, Materials Research.

Optical characterization of 316L stainless steel coated with sol-gel titania

W. L. Vasconcelos, P. Vasconcelos, D. Vasconcelos, 2012 .

AES and FTIR characterization of sol–gel alumina films

W. L. Vasconcelos, D. Vasconcelos, E. Nunes, 2012 .

Corrosion resistance of stainless steel coated with sol–gel silica

W. L. Vasconcelos, D. Vasconcelos, M. Mantel, 2000 .

Preparation of amine-impregnated silica foams using agar as the gelling agent

W. L. Vasconcelos, D. Vasconcelos, Douglas F. Souza, 2016 .

Processing, adhesion and electrical properties of silicon steel having non-oriented grains coated with silica and alumina sol–gel

R. Oréfice, W. L. Vasconcelos, D. Vasconcelos, 2007 .

Sol-Gel SiO2-CaO-P2O5 biofilm with surface engineered for medical application

W. L. Vasconcelos, D. Vasconcelos, V. C. Costa, 2007 .

Biofilm with Surface Engineered for Medical Application

W. L. Vasconcelos, D. Vasconcelos, V. C. Costa, 2007 .

Spectroscopic studies of spessartine from Brazilian pegmatites

D. Vasconcelos, A. Sabioni, S. Eeckhout, 2002 .

Room temperature and ambient pressure deposition of Cu-BTC MOF on SBA-15 functionalized silica supports by simple spray layer-by-layer method

P. Weidler, J. Ribeiro, W. L. Vasconcelos, 2021 .

Correlation between sol–gel reactivity and wettability of silica films deposited on stainless steel

Wander L. Vasconcelos, J. C. Joud, M. Houmard, 2014 .

Impact of heteroatom addition into mesoporous silica for water adsorption in the low partial pressure range

D. Vasconcelos, W. Vasconcelos, Jéssica de O. N. Ribeiro, 2021, Adsorption.

Influence of functionalization method on isomorphic substitution and formation of extra-framework oxides in silica for water vapor adsorption

J. Ribeiro, D. Vasconcelos, W. Vasconcelos, 2021, Adsorption.

Role of the type of grafting solvent and its removal process on APTES functionalization onto SBA-15 silica for CO2 adsorption

J. F. Nascimento, D. Vasconcelos, E. Nunes, 2019, Journal of Porous Materials.

Preparation of silica-poly(2-hydroxyethyl methacrylate) hybrids modified with 3-methacryloxypropyltrimethoxysilane

F. Lameiras, D. Vasconcelos, R. Costa, 2016 .

Structural investigation of cobalt-doped silica derived from sol–gel synthesis

J. Motuzas, J. D. Costa, J. F. Nascimento, 2013 .

Review of perovskite ceramic synthesis and membrane preparation methods

J. D. Costa, D. D. Athayde, D. Vasconcelos, 2016 .

Synthesis and structural evaluation of freeze-cast porous alumina

J. F. Nascimento, M. Houmard, D. Vasconcelos, 2014 .

Processing, structural characterization and performance of alumina supports used in ceramic membranes

J. F. Nascimento, D. Vasconcelos, E. Nunes, 2012 .

Manufacture of Highly Porous Tubular Alumina Substrates with Anisotropic Pore Structure by Freeze‐Casting

J. Ribeiro, Bruno M. Sousa, D. D. Athayde, 2020, Advanced Engineering Materials.

Microstructural investigation and performance evaluation of slip-cast alumina supports

D. Vasconcelos, Janaína A. Queiroga, Douglas F. Souza, 2017 .

Microstructural characterization and mechanical properties on Al2O3–TiO2 materials obtained by uniaxial pressing and extrusion

J. F. Nascimento, D. Vasconcelos, J. J. Vilela, 2021 .

Microstructural characterization of magnesias derived from different sources and their influence on the structure of ceramic films formed on a 3% silicon steel surface

D. Vasconcelos, M. G. M. M. Cesar, W. Vasconcelos, 2002 .

Influence of process parameters on the morphological evolution and fractal dimension of sol–gel colloidal silica particles

D. Vasconcelos, W. R. Campos, V. Vasconcelos, 2002 .

Influence of MgO containing strontium on the structure of ceramic film formed on grain oriented silicon steel surface

D. Vasconcelos, M. G. M. M. Cesar, M. Cunha, 1999 .

Synthesis and structural characterization of potato starch sponges

F. Brandão, J. F. Nascimento, M. Houmard, 2012 .

The Neck to Particle Ratio Effect on the Mechanical and Morphological Sintering Features of Porous Stainless Steel (SS) Hollow Fibers

Diego R. Schmeda-Lopez, W. Meulenberg, D. Vasconcelos, 2018 .

Production of Pure Granules Of Sba-15 Mesoporous Silica

J. Ribeiro, D. Vasconcelos, G. Magalhães, 2018, Materials Research.

Stainless steel hollow fibres – Sintering, morphology and mechanical properties

Diego R. Schmeda-Lopez, M. Bram, S. Smart, 2015 .

Carbonation passivation layer of scandium loaded BSCF perovskite

J. Motuzas, J. D. Costa, D. D. Athayde, 2017 .

Evaluation of surface energetics of zirconium-containing mesoporous silica using novel universal isotherm model

J. Ribeiro, D. D. Athayde, D. Vasconcelos, 2020, Adsorption.