G. Erkens

发表

Electron and laser radiation as sources of zirconia film deposition

D. Wesner, E. Kreutz, O. Lemmer, 1995 .

Comparative characterization of alumina coatings deposited by RF, DC and pulsed reactive magnetron sputtering

G. Erkens, T. Leyendecker, R. Cremer, 1999 .

Oxidation resistance of titanium–aluminium–silicon nitride coatings

G. Erkens, A. Vennemann, H. Stock, 2003 .

Increasing of cutting performance of PVD coated cemented carbide inserts in chipboard milling through improvement of the film adhesion, considering the coating cutting loads

K. Bouzakis, G. Erkens, T. Leyendecker, 2000 .

A nanoindentation based determination of internal stress alterations in PVD films and their cemented carbides substrates induced by recoating procedures and their effect on the cutting performance

Fritz Klocke, Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, 2004 .

Wear development on cemented carbide inserts, coated with variable film thickness in the cutting wedge region

K. Bouzakis, N. Michailidis, G. Erkens, 2004 .

Characterization of cohesion, adhesion and creep-properties of dynamically loaded coatings through the impact tester

Konstantinos-Dionysios Bouzakis, Giorgos Giannopoulos, Nikolaos Michailidis, 2001 .

Coatings’ micro abrasion investigated by the inclined impact test at various loads under dry and lubricated conditions

K. Bouzakis, E. Pavlidou, G. Erkens, 2008 .

Microabrasion of Coatings Investigated by the Inclined Impact Test at Various Loads under Dry and Lubricated Conditions

K. Bouzakis, E. Pavlidou, G. Erkens, 2007 .

Thin hard coatings fracture propagation during the impact test

Konstantinos-Dionysios Bouzakis, T. Leyendecker, K. Bouzakis, 2004 .

Wear development of cemented carbide inserts coated with mono and multilayer PVD films, considering their strength properties, adhesion and the cutting loads

K. Bouzakis, N. Michailidis, G. Erkens, 2006 .

The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation

K. Bouzakis, N. Michailidis, G. Erkens, 2002 .

Micro-blasting of PVD Films, an Effective Way to Increase the Cutting Performance of Coated Cemented Carbide Tools

Nikolaos Michailidis, G. Skordaris, Eleni Pavlidou, 2005 .

Wear and Adhesion Optimization of Thin TiAlN Films by Structure Design

K. Bobzin, G. Erkens, O. Knotek, 2001 .

Wear of Tools Coated with Various PVD Films: Correlation with Impact Test Results by Means of FEM Simulations

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, E. Lili, 2007 .

The effect of coating thickness, mechanical strength and hardness properties on the milling performance of PVD coated cemented carbides inserts

K. Bouzakis, N. Michailidis, K. Efstathiou, 2003 .

The influence of the coating thickness on its strength properties and on the milling performance of PVD coated inserts

K. Bouzakis, N. Michailidis, K. Efstathiou, 2003 .

Actual indenter tip geometries, material elastoplastic deformation laws and universal hardness

Nikolaos Michailidis, G. Skordaris, S. Hadjiyiannis, 2002 .

Effect of film ion bombardment during the PVD process on the mechanical properties and cutting performance of TiAlN coated tools.

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, G. Skordaris, 2007 .

New approaches to plasma enhanced sputtering of advanced hard coatings

G. Erkens, 2007 .

Performance of oxygen-rich TiALON coatings in dry cutting applications

B. Karpuschewski, T. Leyendecker, K. Tönshoff, 1998 .

Cutting performance improvement through micro-blasting on well-adherent PVD films on cemented carbide inserts

K. Bouzakis, N. Michailidis, E. Pavlidou, 2005 .

Fatigue failure mechanisms of multi- and monolayer physically vapour-deposited coatings in interrupted cutting processes

Konstantinos-Dionysios Bouzakis, T. Leyendecker, N. Vidakis, 1998 .

Determination of coating residual stress alterations demonstrated in the case of annealed films and based on a FEM supported continuous simulation of the nanoindentation

K. Bouzakis, N. Michailidis, G. Erkens, 2003 .

Properties and performance of high aluminum containing (Ti,Al)N based supernitride coatings in innovative cutting applications

Konstantinos-Dionysios Bouzakis, Kyriakos Efstathiou, A. Asimakopoulos, 2003 .

The inclined impact test: A novel method for the quantification of the adhesion properties of PVD films

Konstantinos-Dionysios Bouzakis, G. Skordaris, A. Asimakopoulos, 2007 .

The inclined impact test, an efficient method to characterize coatings' cohesion and adhesion properties

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, A. Asimakopoulos, 2004 .

Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, Kyriakos Efstathiou, 2001 .

TiAIN–Al2O3 PVD-multilayer for metal cutting operation

G. Erkens, T. Leyendecker, M. Feldhege, 1997 .

Thin hard coatings stress–strain curve determination through a FEM supported evaluation of nanoindentation test results

Nikolaos Michailidis, K. Bouzakis, N. Michailidis, 2001 .

PULSED PLASMA DEPOSITION OF OXIDE HARD COATINGS

G. Erkens, R. Cremer, D. Neuschütz, 2023, Proceeding of Progress in Plasma Processing of Materials, 2003.

Effect of the Cutting Edge Radius and its Manufacturing Procedure, on the Milling Performance of PVD Coated Cemented Carbide Inserts

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, G. Skordaris, 2002 .

Sputter deposition of crystalline alumina coatings

Rainer Cremer, G. Erkens, T. Leyendecker, 2003 .

Quantification of properties modification and cutting performance of (Ti1-xAlx)N coatings at elevated temperatures

Konstantinos-Dionysios Bouzakis, T. Leyendecker, Nikolaos Michailidis, 1999 .

Interpretation of PVD coated inserts wear phenomena in turning

K. Bouzakis, N. Michailidis, N. Vidakis, 2000 .

Laser-assisted physical vapour deposition of ceramics

E. Kreutz, O. Lemmer, G. Erkens, 1992 .

Deposition of ceramics by LPVD

E. Kreutz, O. Lemmer, G. Erkens, 1992 .

The morphology and mechanical properties of Al2O3, ZrO2 and SiC laser-assisted physically vapour deposited films

E. Kreutz, O. Lemmer, G. Erkens, 1992 .

High performance hard carbon coatings (diamond‐like coatings)

G. Erkens, F. Meunier, J. Vetter, 2012 .

Application of low temperature PVD coatings in rolling bearings: tribological tests and experiences with spindle bearing systems

M. Weck, A. Igartua, O. Lemmer, 1996 .

Determination of the fatigue behaviour of thin hard coatings using the impact test and a FEM simulation

Konstantinos-Dionysios Bouzakis, T. Leyendecker, N. Vidakis, 1996 .

Domino Platform: PVD Coaters for Arc Evaporation and High Current Pulsed Magnetron Sputtering

G. Erkens, J. Müller, J. Vetter, 2012 .

Performance of oxide PVD-coatings in dry cutting operations

Herbert Schulz, M. Schulze, I. J. Rass, 2001 .

Effect on PVD coated cemented carbide inserts cutting performance of micro-blasting and lapping of their substrates

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, A. Asimakopoulos, 2005 .

Supernitrides: A novel generation of PVD hardcoatings to meet the requirements of high demanding cutting applications

Konstantinos-Dionysios Bouzakis, G. Skordaris, Kyriakos Efstathiou, 2003 .

Impact Resistance of PVD Films and Milling Performance of Coated Tools at Various Temperature Levels

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, G. Skordaris, 2006 .

Optimisation of the cutting edge roundness and its manufacturing procedures of cemented carbide inserts, to improve their milling performance after a PVD coating deposition

Konstantinos-Dionysios Bouzakis, Nikolaos Michailidis, G. Skordaris, 2003 .