D. Bähre

发表

Model ‐ based Development and Design of Microgrid Power Systems Modellbasierte Entwicklung und Auslegung von Microgrid Energieversorgungssystemen

Guido Kickelbick, H. Seidel, D. Bähre, 2018 .

Influence of the Pre-Stressing on the Residual Stresses Induced by Deep Rolling

D. Bähre, M. Jacquemin, Nataliya Lyubenova, 2017 .

19 . 4 Monitoring production systems for energy-aware planning and design of process chains

G. Seliger, D. Bähre, T. Stock, 2013 .

A novel approach to roundness generation analysis in centerless through-feed grinding in consider of decisive parameters of grinding gap by use of 3D kinematic simulation

D. Bähre, Mohsen Hassanzadeh Otaghvar, Bernhard Hahn, 2018 .

Herbal Drugs of Abuse Glaucium flavum and Sceletium tortuosum : Metabolism and toxicological detectability of their alkaloids glaucine , mesembrine and mesembrenone studied in rat urine and human liver preparations using GC-MS , LC-MS , LC-HR-MS n , and NMR

A. Einstein, R. Hartmann, D. Bähre, 2014 .

Energy Consumption: One Criterion for the Sustainable Design of Process Chains

Dirk Bähre, Martin Swat, Kirsten Trapp, 2012 .

Energy Consumption as One Possible Exclusion Criterion for the Reuse of Old Equipment in New Production Lines

D. Bähre, M. Swat, Kirsten Trapp, 2011 .

Reproducible, Fast and Adjustable Surface Roughening of Stainless Steel using Pulse Electrochemical Machining☆

D. Bähre, Andreas Rebschläger, Philipp Steuer, 2013 .

Influences on Occurrence of Magnetism During Cutting Processes

Dirk Bähre, Kirsten Trapp, Ralf Tschuncky, 2011, Int. J. Autom. Technol..

Effects of Machining Ferromagnetic Materials on Magnetic Property Changes

D. Bähre, Kirsten Trapp, Lilliane Käfer, 2015 .

Optimized design for modified auxetic structures based on a neural network approach

D. Bähre, S. Bronder, Franziska Herter, 2022, Materials Today Communications.

Hepatic Cytochrome P450 Inhibition by Designer Drugs and Their Metabolites

R. Hartmann, V. Flockerzi, D. Bähre, 2016 .

Fabrication of micro-structured tools for the production of curved metal surfaces by pulsed electrochemical machining

D. Durneata, D. Bähre, H. Natter, 2021, The International Journal of Advanced Manufacturing Technology.

Development of mass spectrometric methods for the quantitation of drugs of abuse and therapeutic drugs ( DAT / TDM ) in clinical samples

D. Bähre, 2015 .

Performance of laser surface textured cemented carbide tools during abrasive machining: Coating effects, surface integrity assessment and wear characterization

D. Bähre, L. Llanes, S. Fang, 2020 .

Process Design in Pulse Electrochemical Machining Based on Material Specific Data – 1.4301 and Electrolytic Copper as an Example

D. Bähre, Andreas Rebschläger, Philipp Steuer, 2015 .

Video based Process Observations of the Pulse Electrochemical Machining Process at High Current Densities and Small Gaps

D. Bähre, Andreas Rebschläger, Rouven Kollmannsperger, 2014 .

Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses

F. Mücklich, Yanping Cao, D. Bähre, 2020 .

Ablation investigation of cemented carbides using short-pulse laser beams

D. Bähre, L. Llanes, Rita Lima, 2018 .

Selecting Manufacturing Process Chains in the Early Stage of the Product Engineering Process with Focus on Energy Consumption

Dirk Bähre, Martin Swat, Horst Brünnet, 2014 .

Electrochemical dissolution of cast iron in NaNO3 electrolyte

D. Bähre, H. Natter, O. Weber, 2015, Journal of Applied Electrochemistry.

Wear Characterization of Cemented Carbides (WC–CoNi) Processed by Laser Surface Texturing under Abrasive Machining Conditions

Shiqi Fang, Luis Llanes, Dirk Bähre, 2017 .

Quality Prediction of Honed Bores with Machine Learning Based on Machining and Quality Data to Improve the Honing Process Control

Dirk Bähre, Sebastian Schorr, Sven Klein, 2020 .

Influence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (WC-CoNi) with Different Grain Size

Frank Mücklich, Shiqi Fang, Luis Llanes, 2018 .

Quality Prediction of Reamed Bores Based on Process Data and Machine Learning Algorithm: A Contribution to a More Sustainable Manufacturing

Dirk Bähre, Sebastian Schorr, Matthias Möller, 2020 .

Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts

F. Mücklich, A. Rosenkranz, C. Gachot, 2016 .

Integrated Additive Product Development for Multi-Material Parts

Michael Vielhaber, Dirk Bähre, Jerome Kaspar, 2019, Procedia Manufacturing.

Microstructural and metallurgical assessment of the laser-patterned cemented tungsten carbide (WC-CoNi)

F. Mücklich, A. Rosenkranz, D. Bähre, 2018 .

Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser

A. Rosenkranz, C. Gachot, D. Bähre, 2017 .

Pulse electrochemical machining of cast iron: a layer-based approach for modeling the steady-state dissolution current

D. Bähre, H. Natter, O. Weber, 2015, Journal of Solid State Electrochemistry.

Modeling of the Material / Electrolyte Interface and the Electrical Current Generated during the Pulse Electrochemical Machining of Grey Cast Iron

D. Bähre, Andreas Rebschläger, Philipp Steuer, 2013 .

A Use Case to Implement Machine Learning for Life Time Prediction of Manufacturing Tools

Dirk Bähre, Sebastian Schorr, Jan C. Aurich, 2020 .

Impact of the Process Parameters, the Measurement Conditions and the Pre-Machining on the Residual Stress State of Deep Rolled Specimens

D. Bähre, Nataliya Lyubenova, J. Fouquet, 2019, Journal of Manufacturing and Materials Processing.

Fabrication and tribological performance of a laser-textured hardmetal guiding stone for honing processes

C. Gachot, D. Bähre, Chia-Jui Hsu, 2019, International Journal of Refractory Metals and Hard Materials.

3D characterization of cubic boron nitride (CBN) composites used as tool material for high precision abrasive machining processes

F. Mücklich, D. Bähre, L. Llanes, 2017 .

Investigation of the surface residual stresses in single and multiple trace deep rolling on flat AISI 4140 specimens

D. Bähre, Nataliya Lyubenova, 2017 .

Improved Process Control and Model of Axial Forces of One-way Abrasive Flow Machining

D. Bähre, S. Diebels, Nataliya Lyubenova, 2014 .

Influence of Cutting Speed in Turning and Force in Subsequent Diamond Smoothing on Magnetic Properties of Steel 100Cr6

D. Bähre, C. Rauch, H. Liborius, 2021, Metals.

Laser Surface Texturing of PECM Tools and the Validation

D. Bähre, L. Llanes, S. Fang, 2020 .

Surface integrity assessment of laser treated and subsequently coated cemented carbides

C. Colominas, D. Bähre, L. Llanes, 2019, International Journal of Refractory Metals and Hard Materials.

Quality Prediction of Drilled and Reamed Bores Based on Torque Measurements and the Machine Learning Method of Random Forest

D. Bähre, Matthias Möller, Sebastian Schorr, 2020, Procedia Manufacturing.

Modeling and Measurement of Residual Stresses along the Process Chain of Autofrettaged Components by Using FEA and Hole-Drilling Method with ESPI

T. Rickert, D. Bähre, H. Brünnet, 2013 .

Design Study for Multifunctional 3D Re‐entrant Auxetics

D. Bähre, S. Bronder, Franziska Herter, 2021, Advanced Engineering Materials.

Laser surface texturing of a WC-CoNi cemented carbide grade: Surface topography design for honing application

D. Bähre, L. Llanes, S. Fang, 2018, Tribology International.

Effect of Different Manufacturing Process Steps on the Final Residual Stress Depth Profile along the Process Chain of Autofrettaged Thick-Walled-Cylinders

M. Hofmann, D. Bähre, Nataliya Lyubenova, 2014 .

Simulation of the Tool Shape Design for the Electrochemical Machining of Jet Engine Vanes

Dirk Bähre, A. Ernst, T. Heib, 2018 .

Assessment of wear micromechanisms on a laser textured cemented carbide tool during abrasive-like machining by FIB/FESEM

D. Bähre, L. Llanes, S. Fang, 2020 .

Assessment of wear micromechanisms on a laser textured cemented carbide tool during abrasive-like machining by FIB/FESEM

D. Bähre, L. Llanes, S. Fang, 2020, Friction.

Analysis of Different Surface Structures of Hard Metal Guiding Stones in the Honing Process

Dirk Bähre, Sven Klein, Shiqi Fang, 2017 .

Synergic Effects of Nanosecond Laser Ablation and PVD-Coating on Cemented Carbides: Assessment on Surface and Mechanical Integrity

D. Bähre, S. Fang, Luis Llanes, 2023, Metals.