Jingzhou Yang

发表

Toward High Fidelity Headform and Respirator Models

Zhipeng Lei, Jingzhou Yang, 2010 .

Opportunistic Network Coding and Signal Combining ARQ for Two-Way DF Relay Network

Yang Liu, Dongmei Zhang, Kui Xu, 2015, ICIT 2015.

Partial Self-interference Cancellation with Frame Pre-aliasing Method for Full-duplex DF System

Fei Wang, Dongmei Zhang, Chenxi Yuan, 2015 .

A dynamic sliding-mode controller with fuzzy adaptive tuning for an active suspension system

Yunqing Zhang, Liping Chen, Jingzhou Yang, 2007 .

A Geodesics-Based Model for Obstacle Avoidance

Jingzhou Yang, Jason C. Olmstead Muhs, 2005 .

A Fuzzy Synthesis Control Strategy for Active Steering Based on Multi-Body Models

Jie Zhang, Jingzhou Yang, Yunqing Zhang, 2007 .

Dynamic optimization of human stair-climbing motion

Yujiang Xiang, Jasbir S. Arora, Salam Rahmatalla, 2008 .

Finite Element Analysis for the Interface of a Respirator and the Human Face -A Pilot Study

Jichang Dai, Jingzhou Yang, Ziqing Zhuang, 2009 .

Workspace analysis and visualization for Santos'™ upper extremity

Karim Abdel-Malek, Jingzhou Yang, Tariq Sinokrot, 2005 .

A new procedure for aerodynamic missile designs using topological optimization approach of continuum structures

Zhen Luo, Liping Chen, Jingzhou Yang, 2006 .

Use of multi-objective optimization for digital human posture prediction

Jasbir S. Arora, Karim Abdel-Malek, R. Timothy Marler, 2009 .

Effect of Obesity on Seated Posture Inside a Vehicle Based on Digital Human Models

Jingzhou Yang, Jared Gragg, 2011 .

Enhanced Fuzzy sliding Mode controller for robotic manipulators

Jingzhou Yang, Li-Ping Chen, Yong-Sheng Zhao, 2007, Int. J. Robotics Autom..

Fractional PIλDμ control and optimisation for vehicle active suspension

Yunqing Zhang, Liping Chen, Long Zhi, 2008 .

Enhanced Fuzzy Sliding Mode Controller for Automated Clutch of AMT Vehicle

Yunqing Zhang, Liping Chen, Jingzhou Yang, 2006 .

Design and Analysis of an Inherently-Compliant Light-Weight Active Hand Prosthesis

Karim Abdel-Malek, Jingzhou Yang, D. DeGraff, 2002 .

A Fuzzy Synthesis Control Scheme and Optimization for Vehicle Dynamic Stability System

Yunqing Zhang, Liping Chen, Si Gao, 2007 .

Toward a New Digital Pregnant Woman Model and Kinematic Posture Prediction

Jingzhou Yang, Jared Gragg, Bradley Howard, 2010 .

Digital Warfighter Modeling for Military Applications

Jasbir S. Arora, Timothy Marler, Karim Abdel-Malek, 2009 .

Synthesis and Analysis of the Double-Axle Steering Mechanism Considering Dynamic Loads

Yunqing Zhang, Liping Chen, Gang Qin, 2008 .

Optimization-Based Workspace Zone Differentiation and Visualization for Santos™

Karim Abdel-Malek, Jingzhou Yang, Tariq Sinokrot, 2006 .

A mathematical method for ergonomic-based design: placement

Wei Yu, Karim Abdel-Malek, Jingzhou Yang, 2004 .

A robust formulation for prediction of human running

Joo Hyun Kim, Yujiang Xiang, Jasbir S. Arora, 2007 .

Manufacturing- and machining-based topology optimization

Yunqing Zhang, Liping Chen, Jingzhou Yang, 2006 .

Robust Optimal Design for Enhancing Vehicle Handling Performance

Yunqing Zhang, Wei Chen, Liping Chen, 2008 .

A fuzzy approach for determining a feasible point in a constrained problem

Singiresu S Rao, R. Timothy Marler, Jingzhou Yang, 2004 .

A physics-based digital human model

Chris Murphy, Jasbir S. Arora, Salam Rahmatalla, 2009 .

A Fuzzy Synthesis Control Strategy for Active Four-Wheel Steering Based on Multi-Body Models

Jie Zhang, Yunqing Zhang, Liping Chen, 2008 .

Prediction of Supporting Hand Forces for Common Automotive Assembly Tasks Based on Optimization and Stability Techniques for Given Posture

Guolai Yang, Jingzhou Yang, Bradley Howard, 2012 .

Multi-objective optimisation of parallel hybrid electric vehicles based on fuzzy logic control

Yunqing Zhang, Yuan Liang, Wei Chen, 2008 .

Simulation of planar flexible multibody systems with clearance and lubricated revolute joints

Yunqing Zhang, Qiang Tian, Liping Chen, 2010 .

Human Modeling and Simulation

Jingzhou Yang, 2008 .

Real-Time Inverse Kinematics for Humans

Karim Abdel-Malek, Zan Mi, Jingzhou Yang, 2002 .

New capabilities for the virtual-human Santos™

Joo Hyun Kim, Jasbir S. Arora, Karim Abdel-Malek, 2006 .

Santos: A Physics-Based Digital Human Simulation Environment

Chris Murphy, Jasbir S. Arora, Timothy Marler, 2006 .

Simulation of a viscoelastic flexible multibody system using absolute nodal coordinate and fractional derivative methods

Qiang Tian, Jingzhou Yang, Liping Chen, 2009 .

SANTOS ™ Hand: A 25 Degree-of-Freedom Model

Karim Abdel-Malek, Jingzhou Yang, Jingzhou Yang, 2005 .

Fuzzy tolerance multilevel approach for structural topology optimization

Karim Abdel-Malek, Jingzhou Yang, Liping Chen, 2006 .

CLOSED-FORM SWEPT VOLUME OF IMPLICIT SURFACES

Karim Abdel-Malek, Jingzhou Yang, Denis Blackmore, 2000 .

A novel formulation for determining joint constraint loads during optimal dynamic motion of redundant manipulators in DH representation

Karim Abdel-Malek, Jingzhou Yang, Joo H. Kim, 2008 .

A new hybrid fuzzy-goal programming scheme for multi-objective topological optimization of static and dynamic structures under multiple loading conditions

Karim Abdel-Malek, Jingzhou Yang, Yun-Qing Zhang, 2006 .

Dual-Arm Dynamic Motion Simulation and Prediction of Joint Constraint Loads Using Optimization

Joo Hyun Kim, Karim Abdel-Malek, Jingzhou Yang, 2007 .

A hybrid topology optimization algorithm for structural design

Jingzhou Yang, Liping Chen, Yunqing Zhang, 2005 .

Throwing motion generation of a biped human model

Yujiang Xiang, Jingzhou Yang, J.H. Kim, 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

STUDY OF BI-CRITERION UPPER BODY POSTURE PREDICTION USING PARETO OPTIMAL SETS

Jasbir S. Arora, Karim Abdel-Malek, R. Timothy Marler, 2005 .

On the workspace boundary determination of serial manipulators with non-unilateral constraints

Karim Abdel-Malek, Jingzhou Yang, Yunqing Zhang, 2008 .

Study of key algorithms in topology optimization

Jingzhou Yang, Liping Chen, Yunqing Zhang, 2007 .

Verification of NC machining processes using swept volumes

Karim Abdel-Malek, Jingzhou Yang, K. Abdel-Malek, 2006 .

Driver Accommodation Assessment Using Physics-Based Posture Prediction Model

Jingzhou Yang, Ozsoy Burak, 2013 .

Validation Methodology Development for Predicted Posture

Jingzhou Yang, Salam Rahmatalla, Karim Abdel-Malek, 2007 .

Planning for Kinematically Smooth Manipulator Trajectories

Karim Abdel-Malek, Zan Mi, Jingzhou Yang, 2002 .

Multiple stiffness topology optimizations of continuum structures

Jingzhou Yang, Liping Chen, Yunqing Zhang, 2006 .

Natural frequencies of a cantilever beam and block system with clearance while block staying on given position

Chen Qiang, Guolai Yang, Jianli Ge, 2013 .

Dynamics analysis of linear elastic planar mechanisms

Karim Abdel-Malek, Jingzhou Yang, K. Abdel-Malek, 2007 .

Formulation of Human Performance Measures for Full Body Pregnant Women Standing Posture Prediction

Jingzhou Yang, Bradley Howard, 2011 .

Determining the initial configuration of uninterrupted redundant manipulator trajectories in a manufacturing environment

Joo Hyun Kim, Karim Abdel-Malek, Zan Mi, 2011 .

Human Performance Measures : Mathematics

Karim Abdel-Malek, Jingzhou Yang, K. Abdel-Malek, 2022 .

Human Jumping Motion Analysis and Simulation- A Literature Review

Jingzhou Yang, Jingzhou Yang, Burak Ozsoy, 2010 .

Efficient ZMP Formulation and Effective Whole-Body Motion Generation for a Human-Like Mechanism

Joo Hyun Kim, Yujiang Xiang, Jasbir S. Arora, 2008 .

METHOD AND CODE FOR THE VISUALIZATION OF MULTIVARIATE SOLIDS

Karim Abdel-Malek, Jingzhou Yang, K. Abdel-Malek, 2000 .

Survey of Biomechanical Models for the Human Shoulder Complex

Jingzhou Yang, Karim Abdel-Malek, Karim Abdel-Malek, 2008 .

Optimal Trajectory Planning for Redundant Manipulators Based on Minimum Jerk

Joo Hyun Kim, Karim Abdel-Malek, Jingzhou Yang, 2008 .

Determining weights of joint displacement objective function for standing reach tasks

Qinghong Zhang, Jingzhou Yang, Jared Gragg, 2011 .

Continuum topology optimization for monolithic compliant mechanisms of micro-actuators

Karim Abdel-Malek, Zhen Luo, Yixian Du, 2006 .