A. Sarkar

发表

Solar distillation using three different phase change materials stored in a copper cylinder

Rishikesh Singh, Varun Kumar Sonker, J. Chakraborty, 2019, Energy Reports.

Influence of Alternate Fuels on the Performance and Emission from Internal Combustion Engines and Soot Particle Collection Using Thermophoretic Sampler: A Comprehensive Review

Rishikesh Singh, J. Chakraborty, A. Sarkar, 2019 .

Performance assessment of a passive solar still integrated with thermal energy storage and nanoparticle stored in copper cylinders

Rishikesh Singh, Varun Kumar Sonker, J. Chakraborty, 2020, International Journal of Energy Research.

Performance assessment of novel biomass gasification based CCHP systems integrated with syngas production

A. Sarkar, J. Sarkar, J. Chakraborty, 2019, Energy.

CHAPTER 3 Freezing and thawing of foods – computation methods and thermal properties correlation

R. Singh, A. Sarkar, H. Schwartzberg, 2007 .

Co-pyrolysis of eucalyptus and sodium polyacrylate: optimization and synergistic effect

D. Shrivastava, Rishikesh Singh, J. Chakraborty, 2020 .

Spatial Variation of Convective Heat Transfer Coefficient in Air Impingement Applications

R. Singh, A. Sarkar, 2003 .

Energy and exergy analysis for torrefaction of pigeon pea stalk (cajanus cajan) and eucalyptus (eucalyptus tereticornis)

Rishikesh Singh, J. Chakraborty, A. Sarkar, 2020 .

Effect of torrefaction on the physicochemical properties of eucalyptus derived biofuels: estimation of kinetic parameters and optimizing torrefaction using response surface methodology (RSM)

Rishikesh Singh, J. Chakraborty, A. Sarkar, 2020 .

Effect of torrefaction on the physicochemical properties of pigeon pea stalk (Cajanus cajan) and estimation of kinetic parameters

Rishikesh Singh, J. Chakraborty, A. Sarkar, 2019, Renewable Energy.

COMMERCIAL-SCALE FORCED-AIR COOLING

R. Singh, A. Sarkar, J. Thompson, 2004 .

Utilization of accelerator and reactor based nuclear analytical techniques for chemical characterization of automobile windshield glass samples and potential of statistical analyses using trace elements towards glass forensics.

A. Sarkar, H. Bagla, R. Acharya, 2022, Forensic science international.

Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel

T. K. Bandyopadhyay, A. Sarkar, S. Mandal, 2019, Materials Science and Engineering: A.

Recrystallization behaviour and tensile properties of Al-added medium-Mn-steel at different deformation-annealing conditions

T. K. Bandyopadhyay, A. Sarkar, S. Mandal, 2019, Materials Science and Technology.

Interfacial Microstructural and Corrosion Characterizations of Friction Stir Welded AA6061-T6 and AISI304 Materials

Surjya K. Pal, R. P. Mahto, J. Majumdar, 2018, Metals and Materials International.

COMMERCIAL-SCALE FORCED-AIR COOLING OF PACKAGED STRAWBERRIES

Arnab Sarkar, James F. Thompson, Brent A. Anderson, 2004 .

Development and Characterization of a Novel Ti-Modified High-Si Medium-Mn Steel Possessing Ultra-High Strength and Reasonable Ductility After Hot Rolling

K. Ray, A. Sarkar, S. Mandal, 2018, Journal of Materials Engineering and Performance.

Influence of annealing parameters on phase evolution and recrystallization kinetics of a Mn-Al-Si alloyed duplex steel

A. Sarkar, S. Mandal, S. Sanyal, 2017 .

Unveiling the Role of Graphene Oxide as an Interface Interlocking Ingredient in Polyvinylidene Fluoride‐Based Multilayered Thin‐Film Capacitors for High Energy Density and Ultrafast Discharge Applications

Prateek, A. Garg, A. Sarkar, 2021 .

Enhanced strength-ductility relationship in a medium Mn high Al-alloyed multicomponent steel through thermomechanical processing

A. Sarkar, S. Mandal, S. Sanyal, 2017 .

Optimizing the torrefaction of pigeon pea stalk (cajanus cajan) using response surface methodology (RSM) and characterization of solid, liquid and gaseous products

Rishikesh Singh, J. Chakraborty, A. Sarkar, 2020 .

Proposal and design of a new biomass based syngas production system integrated with combined heat and power generation

Jahar Sarkar, M. Prakash, J. Sarkar, 2017 .

Fluid Flow and Heat Transfer in Air Jet Impingement in Food Processing

Mukund V. Karwe, R. P. Singh, R. Singh, 2004 .

Assessing pollution removal efficiencies of some selected parameters by applying different remediation techniques for petroleum oily sludge

S. Baruah, A. Sarkar, Anindita Bhattacharya, 2021, Environmental Challenges.

Effect of 8-13WT%Mn on the Microstructural Characterization of Fe-Mn-C Steel

A. Sarkar, T. Bandyopadhyay, 2015 .

Thermal Properties of Frozen Foods

R. Singh, A. Sarkar, 2014 .

Application of recycled aggregates generated from waste materials towards improvement in acoustical and thermal conductivity of concrete

A. Sarkar, Supriya Mohanty, A. Sanyal, 2023, Materials Today: Proceedings.

Pyrolysis of torrefied crop residue: Optimization using response surface methodology and benefits of bio-char in co-combustion with coal

Rishikesh Singh, A. Sarkar, 2023, Industrial Crops and Products.

Influence of Alternate Fuels on the Performance and Emission from Internal Combustion Engines and Soot Particle Collection Using Thermophoretic Sampler: A Comprehensive Review

Rishikesh Singh, J. Chakraborty, A. Sarkar, 2018, Waste and Biomass Valorization.

Techno-economic and 4E comparisons of various thermodynamic power cycles for low-medium grade heat recovery

N. K. Maheshwari, J. Sarkar, A. Sarkar, 2023, Process Safety and Environmental Protection.

Development of a frugal solar still using phase change material and nanoparticles integrated with commercialization through a novel economic model

Varun Kumar Sonker, J. Chakraborty, A. Sarkar, 2022, Journal of Energy Storage.

4E analysis and optimization of novel ejector-enhanced organic Rankine cycles by introducing new economic models

J. Sarkar, A. Sarkar, M. Srivastava, 2023, Thermal Science and Engineering Progress.

Quasi-static indentation damage mechanics of PU foam core reinforced with fly ash particulate

A. Sarkar, P.K. Singh, A. S. Pareta, 2023, Journal of Cellular Plastics.

Air impingement heating.

A. Sarkar, R. Singh, 2004 .

Mathematical modeling of air-impingement cooling of finite slab shaped objects and effect of spatial variation of heat transfer coefficient

R. Paul Singh, Ferruh Erdogdu, A. Sarkar, 2005 .

Air impingement technology for food processing: visualization studies

R. Paul Singh, A. Sarkar, Arnab Sarkar, 2004 .

Correlation Between Microstructure and Tensile Properties of Low-Carbon Steel Processed via Different Thermomechanical Routes

D. Chakrabarti, A. Sarkar, A. Karmakar, 2023, Journal of Materials Engineering and Performance.

Development of a biodegradable microfluidic paper-based device for blood-plasma separation integrated with non-enzymatic electrochemical detection of ascorbic acid.

R. Ram, A. Sarkar, Rahul Verma, 2023, Talanta.