Zhengyang Li

发表

In vitro antibacterial properties of MoO3/SiO2/Ag2O nanocomposite coating prepared by double cathode glow discharge technique

Shuyun Jiang, Yanjie Zhao, Jiang Xu, 2020 .

Statistical analysis on rolling contact fatigue in railroad axle bearing steel

Yujie Wei, Zhiming Liu, Zhengyang Li, 2018, Fatigue & Fracture of Engineering Materials & Structures.

Corrosion behavior of a ZrCN coated Ti alloy with potential application as a bipolar plate for proton exchange membrane fuel cell

P. Munroe, Jiang Xu, Zonghan Xie, 2016 .

A reactive-sputter-deposited TiSiN nanocomposite coating for the protection of metallic bipolar plates in proton exchange membrane fuel cells

Shuyun Jiang, Jiang Xu, P. Munroe, 2020 .

Effect of the pouring temperature by novel synchronous rolling-casting for metal on microstructure and properties of ZLl04 alloy

Q. Yan, Zhengyang Li, Xiaoqiang Luo, 2016 .

Electrochemical noise analysis of cavitation erosion corrosion resistance of NbC nanocrystalline coating in a 3.5 wt% NaCl solution

Shuyun Jiang, Jiang Xu, P. Munroe, 2021 .

Improving the strength and the toughness of Mg–Cu–(Y, Gd) bulk metallic glass by minor addition of Nb

X. Hui, G. Chen, Zhengyang Li, 2009 .

Niobium addition enhancing the corrosion resistance of nanocrystalline Ti5Si3 coating in H2SO4 solution

Jiang Xu, P. Munroe, Zonghan Xie, 2014 .

Uniting Superhardness And Damage-tolerance In A Nanosandwich-structured Ti-B-N Coating

Jiang Xu, P. Munroe, Zonghan Xie, 2014 .

INVESTIGATION ON DEPTH OF HEAT AFFECTED ZONE OF DISCHARGE SPOT BY HIGH REPETITIVE RATE YAG LASER-INDUCED DISCHARGE TEXTURING

M. Zhong, Wenjin Liu, Zhengyang Li, 2006 .

Remarkable cavitation erosion–corrosion resistance of CoCrFeNiTiMo high-entropy alloy coatings

Shuyun Jiang, P. Munroe, Jiang Xu, 2021 .

Oxidation resistance of Mo(Si1−xAlx)2 nanocrystalline films and characterization of their oxide scales by electrochemical impedance spectroscopy

Jiang Xu, P. Munroe, Zonghan Xie, 2014 .

Investigation of slurry erosion-corrosion behavior of Ta(Si1−xAlx)2 nanocrystalline coatings

Shuyun Jiang, Jiang Xu, Zhengyang Li, 2020, Materials Research Express.

Role of Cr additions in enhancing wear and oxidation resistance of (Mo1−xCrx)Si2 nanocrystalline films

Jiang Xu, P. Munroe, Zonghan Xie, 2014 .

Role of Al additions in wear control of nanocrystalline Mo(Si1−xAlx)2 coatings prepared by double cathode glow discharge technique

Z. Y. Li, Jiu-hua Xu, Zhengyang Li, 2013 .

Mechanical properties of Cr-alloyed MoSi2-based nanocomposite coatings with a hierarchical structure

P. Munroe, Jiang Xu, Zonghan Xie, 2013 .

Fatigue crack propagation in laser alloyed ductile cast iron surface

M. Zhong, Haiyan Zhao, Wenjin Liu, 2013 .

Effect of Al addition upon mechanical robustness and corrosion resistance of Mo5Si3/MoSi2 gradient nanocomposite coatings

Jiang Xu, P. Munroe, Linlin Liu, 2013 .

The influence of semiconducting properties of passive films on the cavitation erosion resistance of a NbN nanoceramic coating

Shuyun Jiang, Jiang Xu, P. Munroe, 2020, Ultrasonics sonochemistry.

Formation mechanism and improved properties of Cu95Fe5 homogeneous immiscible composite coating by the combination of mechanical alloying and laser cladding

Shengfeng Zhou, Xiaoqin Dai, Zhengyang Li, 2018 .

Novel high damage-tolerant, wear resistant MoSi2-based nanocomposite coatings

Jiang Xu, P. Munroe, Zonghan Xie, 2013 .

Formation of high strength Mg-Cu-Zn-Y alloys

K. Yao, X. Hui, G. Chen, 2008 .

Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding

Bangquan Liao, Zhengyang Li, Shengfeng Zhou, 2018, Optics & Laser Technology.

Phase separated characteristics and soft magnetic properties of [Cu-0.6(FeCrC)(0.4)](100-x)Si-x immiscible composites by laser induction hybrid cladding

Shengfeng Zhou, Xiaoqin Dai, Zhengyang Li, 2018 .

Mechanical and electrochemical properties of nanocrystalline (Mo1−xCrx)3Si coatings: Experimental and modeling studies

P. Munroe, Jiang Xu, Zonghan Xie, 2014 .

The comparative study of thermal fatigue behavior of laser deep penetration spot cladding coating and brush plating Ni–W–Co coating

Jiang Xu, Wenjin Liu, Zhengyang Li, 2006 .

A nanocrystalline zirconium carbide coating as a functional corrosion-resistant barrier for polymer electrolyte membrane fuel cell application

Jiang Xu, P. Munroe, Zonghan Xie, 2015 .

Formation and properties of a self-assembled Cu-Fe-Ni-Cr-Si immiscible composite by laser induction hybrid cladding

Shengfeng Zhou, Xiaoqin Dai, Zhengyang Li, 2018 .

Effect of substrate movement speed by synchronous rolling-casting freeform manufacturing for metal on microstructure and mechanical property of ZL104 aluminum alloy slurry

Guangnan Chen, Q. Yan, Zhengyang Li, 2015, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Strengthening and toughening of Mg-Cu-(Y, Gd) bulk metallic glasses by minor addition of Be

Mingshan Wang, X. Hui, G. Chen, 2007 .

Investigation on rolling sliding wear behavior of wheel steel by laser dispersed treatment

Zhengyang Li, Zhengyang Li, Xueli Xing, 2014 .

Influence of laser dispersed treatment on rolling contact wear and fatigue behavior of railway wheel steel

Jiwang Zhang, Dongfang Zeng, Minhao Zhu, 2014 .

Investigation on Crater Morphology by High Repetitive Rate YAG Laser-Induced Discharge Texturing

M. Zhong, Zhengyang Li, Yan Mingjiang, 2006 .

Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding

Jiang Xu, Zhengyang Li, Wenhui Zhu, 2007 .