N. Gattesco

发表

A penetration test to study the mechanical response of mortar in ancient masonry buildings

R. Felicetti, N. Gattesco, 1998 .

Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate

M. Aiello, C. Papanicolaou, C. Mazzotti, 2017 .

GFRP to strengthen masonry walls: Numerical analysis and evaluation of the different mechanical parameters role

N. Gattesco, A. Gubana, M. Melotto, 2016 .

Experimental and numerical study on the shear behavior of stone masonry walls strengthened with GFRP reinforced mortar coating and steel-cord reinforced repointing

Chiara Bedon, N. Gattesco, C. Amadio, 2015 .

Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization

M. Aiello, T. Triantafillou, C. Mazzotti, 2018, Materials and Structures.

Out-of-plane behavior of reinforced masonry walls: Experimental and numerical study

Natalino Gattesco, Ingrid Boem, N. Gattesco, 2017 .

Rehabilitation of Masonry Buildings with Fibre Reinforced Mortar: Practical Design Considerations Concerning Seismic Resistance

N. Gattesco, I. Boem, 2021, Key Engineering Materials.

The Roof Bracing as Minimum Intervention for the Reduction of the Seismic Vulnerability of Historical Industrial Buildings: Analytical and Numerical Simplified Strategies for the Assessment of the Performances

N. Gattesco, I. Boem, 2020 .

Review of experimental tests and numerical study on masonry vaults reinforced through fiber-reinforced mortar coating

N. Gattesco, I. Boem, 2019, Bulletin of Earthquake Engineering.

Experimental behaviour of non-structural masonry vaults reinforced through fibre-reinforced mortar coating and subjected to cyclic horizontal loads

N. Gattesco, I. Boem, Veronica Andretta, 2018, Engineering Structures.

Numerical study on the reduction of the seismic vulnerability of historical industrial buildings with wide timber roofs

N. Gattesco, I. Boem, 2018 .

Masonry vaults subjected to horizontal loads: Experimental and numerical investigations to evaluate the effectiveness of a GFRM reinforcement

N. Gattesco, I. Boem, 2017 .

Seismic Enhancement of Masonry Buildings Strengthened through GFRP Reinforced Mortar Coating

N. Gattesco, I. Boem, 2015 .

Influence of mortar coating type on the shear resistance of a GFRP based strengthening technique for brick masonry walls

N. Gattesco, I. Boem, 2016 .

Characterization tests of GFRM coating as a strengthening technique for masonry buildings

N. Gattesco, I. Boem, 2017 .

Experimental and numerical study of the shear behavior of stone masonry walls 2 strengthened with GFRP reinforced mortar coating and steel-cord reinforced 3 repointing 4

Chiara Bedon, N. Gattesco, C. Amadio, 2015 .

Cyclic behavior of masonry barrel vaults strengthened through Composite Reinforced Mortar, considering the role of the connection with the abutments

N. Gattesco, I. Boem, 2020 .

Seismic risk of schools at a regional scale: the ASSESS project

M. Pipan, L. Zini, F. Cucchi, 2012 .

The Italian instructions for the design, execution and control of timber constructions (CNR-DT 206 R1/2018)

Chiara Bedon, M. Fragiacomo, B. Calderoni, 2022, Engineering Structures.

Moment Redistribution in Continuous Steel-Concrete Composite Beams with Compact Cross Section

M. Fragiacomo, L. Macorini, N. Gattesco, 2010 .

Numerical Evaluation of Mechanical Parameters Role in GFRP Strengthened Cobblestone Masonry Walls

N. Gattesco, A. Gubana, M. Melotto, 2017 .

Comparison of In-Plane Mechanical Performances of Masonry Walls Strengthened with Different Mortar Coatings Reinforced with Glass or Carbon Fiber Composite Meshes

N. Gattesco, I. Boem, 2017 .

Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization

M. Aiello, T. Triantafillou, C. Mazzotti, 2018, Materials and Structures.

Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes

Natalino Gattesco, Ingrid Boem, N. Gattesco, 2015 .

Diagonal compression tests on masonry walls strengthened with a GFRP mesh reinforced mortar coating

Natalino Gattesco, Ingrid Boem, A. Dudine, 2015, Bulletin of Earthquake Engineering.

Strength and Local Deformability of Wood Beneath Bolted Connectors

Natalino Gattesco, N. Gattesco, 1998 .

Experimental study on multiple-bolt steel-to-timber tension joints

Natalino Gattesco, I. Toffolo, N. Gattesco, 2004 .

In-plane stiffening techniques with nail plates or CFRP strips for timber floors in historical masonry buildings

Lorenzo Macorini, Natalino Gattesco, L. Macorini, 2014 .

Analytical modeling of nonlinear behavior of composite beams with deformable connection

N. Gattesco, N. Gattesco, 1999 .

LOW-CYCLE FATIGUE TEST ON STUD SHEAR CONNECTORS

Ezio Giuriani, Natalino Gattesco, Alessandra Gubana, 1997 .

Experimental study on stud shear connectors subjected to cyclic loading

Ezio Giuriani, N. Gattesco, N. Gattesco, 1996 .

Experimental tests for the characterization of sisal fiber reinforced cementitious matrix for strengthening masonry structures

Daniel V. Oliveira, Natalino Gattesco, Antonella Cecchi, 2019, Construction and Building Materials.

Review of experimental cyclic tests on unreinforced and strengthened masonry spandrels and numerical modelling of their cyclic behaviour

Claudio Amadio, Natalino Gattesco, Giovanni Rinaldin, 2017 .

Composite Reinforced Mortar (CRM) and Fiber-Reinforced Cementitious Matrix (FRCM) for the seismic protection of masonry vaults

N. Gattesco, I. Boem, 2023, Procedia Structural Integrity.

Study on the effectiveness of a CRM system: in-plane and out-of-plane cyclic tests on masonry piers

N. Gattesco, E. Rizzi, A. Dudine, 2023, Procedia Structural Integrity.

Investigating the effectiveness of a CRM system: full scale reverse cyclic tests on a two-storey rubblestone masonry building

F. Minelli, N. Gattesco, E. Rizzi, 2023, Procedia Structural Integrity.

Experimental investigation on the behavior of glued-in rod joints in timber beams subjected to monotonic and cyclic loading

Natalino Gattesco, Alessandra Gubana, Manuela Buttazzi, 2017 .

Pushdown Tests on Masonry Infilled Frames for Assessment of Building Robustness

B. Izzuddin, L. Macorini, N. Gattesco, 2017 .

Experimental and numerical study on the bending performances of glass FRP molded gratings: Influence of restraining conditions and cover plates

N. Gattesco, M. Dilena, I. Boem, 2019, Composite Structures.

Experimental Response of Brick-Masonry Spandrels under In-Plane Cyclic Loading

Lorenzo Macorini, Natalino Gattesco, L. Macorini, 2016 .

A new combined approach to prioritise seismic retrofit interventions on stocks of r.c. school buildings

N. Gattesco, F. da Porto, E. Saler, 2023, International Journal of Disaster Risk Reduction.

Decision-making supports for seismic risk mitigation of schools at a regional scale: the ASSESS project

Luca Zini, Natalino Gattesco, Michele Pipan, 2011 .

EXPERIMENTAL INVESTIGATION ON THE BEHAVIOR OF SPANDRELS IN ANCIENT MASONRY BUILDINGS

N. Gattesco, I. Clemente, Lorenzo Macorini, 2008 .