A. Paudel

发表

Key acceptability attributes of orodispersible films

M. Bresciani, S. Gaisford, M. Orlu, 2018, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Review of sensing technologies for measuring powder density variations during pharmaceutical solid dosage form manufacturing

J. Khinast, A. Paudel, D. Markl, 2020 .

Structural Characterization of Amorphous Solid Dispersions

A. Paudel, J. Meeus, G. Mooter, 2014 .

Novel polyester-based thermoplastic elastomers for 3D-printed long-acting drug delivery applications.

A. Paudel, M. Spoerk, I. Koutsamanis, 2021, Journal of controlled release : official journal of the Controlled Release Society.

Lyophilized protein powders: A review of analytical tools for root cause analysis of lot-to-lot variability

J. Khinast, A. Paudel, V. Wahl, 2016 .

Analytical and Computational Methods for the Determination of Drug-Polymer Solubility and Miscibility.

A. Bansal, A. Paudel, Samarth D. Thakore, 2021, Molecular pharmaceutics.

Relating hydrogen-bonding interactions with the phase behavior of naproxen/PVP K 25 solid dispersions: evaluation of solution-cast and quench-cooled films.

E. Nies, A. Paudel, G. Van den Mooter, 2012, Molecular pharmaceutics.

Spray-Congealing and Wet-Sieving as Alternative Processes for Engineering of Inhalation Carrier Particles: Comparison of Surface Properties, Blending and In Vitro Performance

A. Paudel, H. Schroettner, F. Schiaretti, 2021, Pharmaceutical Research.

A Tribute to Professor Saranjit Singh - A Critical Thinker, Innovator, Mentor, and Educator.

Ravi P. Shah, A. Paudel, Shilpa Sharma, 2021, Journal of pharmaceutical sciences.

The Influence of Relative Humidity and Storage Conditions on the Physico-chemical Properties of Inhalation Grade Fine Lactose

A. Paudel, S. Zellnitz, Milica Stankovic-Brandl, 2021, AAPS PharmSciTech.

Carrier-based dry powder inhalation: Impact of carrier modification on capsule filling processability and in vitro aerodynamic performance.

J. Khinast, A. Paudel, E. Faulhammer, 2015, International journal of pharmaceutics.

Progress in spray-drying of protein pharmaceuticals: Literature analysis of trends in formulation and process attributes

A. Paudel, C. Makert, E. Faulhammer, 2021 .

Insights into DPI sensitivity to humidity: An integrated in-vitro-in-silico risk-assessment

E. Fröhlich, A. Paudel, J. Pinto, 2019, Journal of Drug Delivery Science and Technology.

Searching for physiologically relevant in vitro dissolution techniques for orally inhaled drugs.

E. Fröhlich, A. Paudel, S. Zellnitz, 2019, International journal of pharmaceutics.

Use of PBPK Modeling To Evaluate the Performance of DissolvIt, a Biorelevant Dissolution Assay for Orally Inhaled Drug Products

Maria Malmlöf, S. Arora, E. Selg, 2019, Molecular pharmaceutics.

Continuous low-dose feeding of highly active pharmaceutical ingredients in hot-melt extrusion

J. Khinast, A. Paudel, G. Koscher, 2016, Drug development and industrial pharmacy.

Understanding Concomitant Physical and Chemical Transformations of Simvastatin During Dry Ball Milling

A. Paudel, Dattatray Modhave, Isha Saraf, 2020, AAPS PharmSciTech.

Lipid-based solubilization technology via hot melt extrusion: promises and challenges

A. Paudel, M. Spoerk, O. Zupančič, 2022, Expert opinion on drug delivery.

Elucidation of the effect of added fines on the performance of dry powder inhalation formulations.

A. Paudel, F. Penz, Milica Stankovic-Brandl, 2022, International journal of pharmaceutics.

Influence of Solvent Composition on the Miscibility and Physical Stability of Naproxen/PVP K 25 Solid Dispersions Prepared by Cosolvent Spray-Drying

A. Paudel, G. Van den Mooter, G. Mooter, 2011, Pharmaceutical Research.

Can we predict trends in tribo-charging of pharmaceutical materials from first principles?

A. Paudel, M. Brunsteiner, J. Karrer, 2019, Powder Technology.

An investigation into the effect of spray drying temperature and atomizing conditions on miscibility, physical stability, and performance of naproxen-PVP K 25 solid dispersions.

A. Paudel, G. Van den Mooter, Yves Loyson, 2013, Journal of pharmaceutical sciences.

Development of a Workflow to Engineer Tailored Microparticles Via Inkjet Printing

G. Leitinger, J. Mantanus, E. Roblegg, 2022, Pharmaceutical Research.

Structural and dynamic properties of amorphous solid dispersions: the role of solid-state nuclear magnetic resonance spectroscopy and relaxometry.

A. Paudel, G. Mooter, M. Geppi, 2014, Journal of pharmaceutical sciences.

Machine Learning-Enabled NIR Spectroscopy in Assessing Powder Blend Uniformity: Clear-Up Disparities and Biases Induced by Physical Artefacts

A. Paudel, Prakash Muthudoss, R. Allada, 2022, AAPS PharmSciTech.

Density fluctuations in amorphous pharmaceutical solids. Can SAXS help to predict stability?

P. Laggner, A. Paudel, 2018, Colloids and surfaces. B, Biointerfaces.

Study of a low-dose capsule filling process by dynamic and static tests for advanced process understanding.

J. Khinast, A. Paudel, O. Scheibelhofer, 2018, International journal of pharmaceutics.

Manufacturing of solid dispersions of poorly water soluble drugs by spray drying: formulation and process considerations.

Amrit Paudel, A. Paudel, Z. A. Worku, 2013, International journal of pharmaceutics.

Assessment of Diverse Solid−State Accelerated Autoxidation Methods for Droperidol

A. Ray, A. Paudel, M. Brunsteiner, 2022, Pharmaceutics.

Theoretical and experimental investigation on the solid solubility and miscibility of naproxen in poly(vinylpyrrolidone).

Amrit Paudel, Jan Van Humbeeck, J. van Humbeeck, 2010, Molecular pharmaceutics.

Raman spectroscopy in pharmaceutical product design.

Jukka Rantanen, Dhara Raijada, Amrit Paudel, 2015, Advanced drug delivery reviews.

Relative Contributions of Solubility and Mobility to the Stability of Amorphous Solid Dispersions of Poorly Soluble Drugs: A Molecular Dynamics Simulation Study

J. Khinast, A. Paudel, M. Brunsteiner, 2018, Pharmaceutics.

Effect of Compression on Non-isothermal Crystallization Behaviour of Amorphous Indomethacin

A. Paudel, G. Van den Mooter, P. Rombaut, 2012, Pharmaceutical Research.

Effect of Microbial (Jeevatu) Treatment on Rice (Oryza sativa L.) Production

A. Paudel, S. Adhikari, Kusum Pokhrel, 2013 .

Drug-Excipient Interactions in the Solid State: The Role of Different Stress Factors.

Margaret S. Landis, Geoffrey P. F. Wood, J. Khinast, 2017, Molecular pharmaceutics.

Characterization of degradation products of amorphous and polymorphic forms of clopidogrel bisulphate under solid state stress conditions.

Amrit Paudel, Bhagwat Prasad, Ravi P. Shah, 2010, Journal of pharmaceutical and biomedical analysis.

Quantitative chemical profiling of cellulose acetate excipient via 13C NMR spectroscopy in controlled release formulations.

K. Zangger, A. Paudel, A. Carmody, 2022, Journal of pharmaceutical and biomedical analysis.

Polyelectrolyte-surfactant-complex nanoparticles as a delivery platform for poorly soluble drugs: A case study of ibuprofen loaded cetylpyridinium-alginate system.

S. Hudoklin, M. Kreft, J. Kristl, 2020, International journal of pharmaceutics.

Mechanoactivation as a Tool to Assess the Autoxidation Propensity of Amorphous Drugs.

A. Paudel, J. Pinto, Isha Saraf, 2023, Molecular pharmaceutics.

Insights into the processability and performance of adhesive blends of inhalable jet-milled and spray dried salbutamol sulphate at different drug loads

S. Stegemann, E. Roblegg, A. Paudel, 2018, Journal of Drug Delivery Science and Technology.

Performance indicators for carrier-based DPIs: Carrier surface properties for capsule filling and API properties for in vitro aerosolisation.

A. Zimmer, A. Paudel, S. Stranzinger, 2018, International journal of pharmaceutics.

How does secondary processing affect the physicochemical properties of inhalable salbutamol sulphate particles? A temporal investigation.

E. Roblegg, A. Paudel, J. Pinto, 2017, International journal of pharmaceutics.

A Review of PAT Strategies in Secondary Solid Oral Dosage Manufacturing of Small Molecules.

Stephan Laske, Otto Scheibelhofer, Amrit Paudel, 2017, Journal of pharmaceutical sciences.

Continuous Processing of Micropellets via Hot-Melt Extrusion

Michael E. Piller, J. Khinast, A. Paudel, 2022, AAPS PharmSciTech.

Understanding Carrier Performance in Low-Dose Dry Powder Inhalation: An In Vitro–In Silico Approach

A. Paudel, J. Pinto, Inês Cachola, 2021, Pharmaceutics.

Controlled-Release from High-Loaded Reservoir-Type Systems—A Case Study of Ethylene-Vinyl Acetate and Progesterone

E. Roblegg, A. Paudel, K. Eggenreich, 2020, Pharmaceutics.

PVP-H2O2 Complex as a New Stressor for the Accelerated Oxidation Study of Pharmaceutical Solids

A. Paudel, B. Barrios, Dattatray Modhave, 2019, Pharmaceutics.

Screening Autoxidation Propensities of Drugs in the Solid-State Using PVP and in the Solution State Using N-Methyl Pyrrolidone

A. Ray, A. Paudel, M. Brunsteiner, 2023, Pharmaceutics.

Forced Solid-State Oxidation Studies of Nifedipine-PVP Amorphous Solid Dispersion.

R. Roškar, A. Paudel, D. Neshchadin, 2022, Molecular pharmaceutics.

Towards an understanding of the adsorption of vaporized hydrogen peroxide (VHP) residues on glass vials after a VHP decontamination process using a miniaturized tool.

A. Paudel, Varun Kushwah, J. Poms, 2020, Journal of pharmaceutical sciences.

Formulation and processability screening for the rational design of ethylene-vinyl acetate based intra-vaginal rings.

E. Roblegg, A. Paudel, A. Witschnigg, 2019, International journal of pharmaceutics.

Development of a design space and predictive statistical model for capsule filling of low-fill-weight inhalation products

J. Khinast, A. Paudel, P. Wahl, 2016, Drug development and industrial pharmacy.

Influence of Preparation Methods on Solid State Supersaturation of Amorphous Solid Dispersions: A Case Study with Itraconazole and Eudragit E100

Jan Van Humbeeck, Amrit Paudel, J. Humbeeck, 2010, Pharmaceutical Research.

SEDEX—Self-Emulsifying Delivery Via Hot Melt Extrusion: A Continuous Pilot-Scale Feasibility Study

A. Paudel, J. Matić, M. Spoerk, 2022, Pharmaceutics.

Novel Cleaning-in-Place Strategies for Pharmaceutical Hot Melt Extrusion

Johannes Khinast, Andreas Berghaus, Josip Matić, 2020, Pharmaceutics.

Establishment of a Molding Procedure to Facilitate Formulation Development for Co-extrudates

Eva Roblegg, Johannes G. Khinast, Andreas Witschnigg, 2017, AAPS PharmSciTech.

Towards predicting the product quality in hot-melt extrusion: Small scale extrusion

Andreas Witschnigg, Josip Matić, Carolina Alva, 2020, International journal of pharmaceutics: X.

Role of Crystal disorder and Mechanoactivation in Solid-state Stability of Pharmaceuticals.

A. Paudel, M. Brunsteiner, Dattatray Modhave, 2023, Journal of pharmaceutical sciences.

Influence of Solvent Composition on the Miscibility and Physical Stability of Naproxen/PVP K 25 Solid Dispersions Prepared by Cosolvent Spray-Drying

A. Paudel, G. Mooter, 2011, Pharmaceutical Research.

Pharmaceutical‐grade oral films as substrates for printed medicine

S. Stegemann, S. Stegemann, A. Paudel, 2018, International journal of pharmaceutics.

Phase Behavior of Drug-Lipid-Surfactant Ternary Systems toward Understanding the Annealing-Induced Change.

K. Zangger, P. Laggner, A. Paudel, 2021, Molecular pharmaceutics.

Towards predicting the product quality in hot-melt extrusion: Pilot plant scale extrusion

J. Khinast, A. Paudel, J. Matić, 2021, International journal of pharmaceutics: X.

Interplay of Aging and Lot-to-Lot Variability on the Physical and Chemical Properties of Excipients: A Case Study of Mono- and Diglycerides.

I. Ardelean, H. Weber, P. Laggner, 2021, Molecular pharmaceutics.

Developing HME-Based Drug Products Using Emerging Science: a Fast-Track Roadmap from Concept to Clinical Batch

Raymar Andreina Lara Garcia, J. Khinast, A. Paudel, 2020, AAPS PharmSciTech.

Evolution of the microstructure and the drug release upon annealing the drug loaded lipid-surfactant microspheres.

I. Ardelean, P. Laggner, A. Paudel, 2020, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

High-Molecular-Weight Hypromellose from Three Different Suppliers: Effects of Compression Speed, Tableting Equipment, and Moisture on the Compaction

A. Paudel, I. German Ilić, Peter Grdešič, 2020, AAPS PharmSciTech.

Solid state reactivity of mechano-activated simvastatin: Atypical relation to powder crystallinity.

P. Laggner, A. Paudel, M. Brunsteiner, 2019, Journal of pharmaceutical sciences.

Orodispersible films: Towards drug delivery in special populations.

Heinz Pichler, Amrit Paudel, Simon Gaisford, 2017, International journal of pharmaceutics.

On Absorption Modeling and Food Effect Prediction of Rivaroxaban, a BCS II Drug Orally Administered as an Immediate-Release Tablet

S. Arora, E. Fröhlich, A. Paudel, 2021, Pharmaceutics.

Printing medicines as orodispersible dosage forms: Effect of substrate on the printed micro-structure.

J. Khinast, E. Roblegg, A. Paudel, 2016, International journal of pharmaceutics.

Temperature Cycling-Induced Formation of Crystalline Coatings.

A. Paudel, H. Gruber-Woelfler, H. Schroettner, 2022, International journal of pharmaceutics.

Formulation performance and processability window for manufacturing a dual‐polymer amorphous solid dispersion via hot‐melt extrusion and strand pelletization

J. Khinast, A. Paudel, N. Jäger, 2018, International journal of pharmaceutics.

Can compression induce demixing in amorphous solid dispersions? A case study of naproxen-PVP K25.

Amrit Paudel, A. Paudel, G. Van den Mooter, 2012, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Spherical agglomerates of lactose as potential carriers for inhalation.

O. Planinšek, A. Paudel, S. Stranzinger, 2020, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Tribo-Charging Behaviour of Inhalable Mannitol Blends with Salbutamol Sulphate

J. Khinast, A. Paudel, M. Brunsteiner, 2019, Pharmaceutical research.

Trends in oral small-molecule drug discovery and product development based on product launches before and after the Rule of Five.

S. Stegemann, A. Paudel, K. Box, 2022, Drug discovery today.

The effect of material attributes and process parameters on the powder bed uniformity during a low-dose dosator capsule filling process.

J. Khinast, A. Paudel, R. Šibanc, 2017, International journal of pharmaceutics.

Focusing on powder processing in Dry Powder Inhalation product development, manufacturing and performance.

S. Stegemann, A. Paudel, E. Faulhammer, 2022, International journal of pharmaceutics.

Can 3D printing of oral drugs help fight the current COVID-19 pandemic (and similar crisis in the future)?

Amrit Paudel, Wen-Kai Hsiao, Barbara Lorber, 2020, Expert opinion on drug delivery.

Influence of PLGA End Groups on the Release Profile of Dexamethasone from Ocular Implants.

K. Zangger, A. Paudel, H. Schroettner, 2023, Molecular pharmaceutics.

Investigation into powder tribo-charging of pharmaceuticals. Part I: process-induced charge via twin-screw feeding.

A. Paudel, P. Hainz, T. Hörmann, 2020, International journal of pharmaceutics.

Investigation into powder tribo-charging of pharmaceuticals. Part II: Sensitivity to relative humidity.

A. Paudel, W. Hsiao, P. Hainz, 2020, International journal of pharmaceutics.

Feasibility of rapidly assessing reactive impurities mediated excipient incompatibility using a new method: A case study of famotidine-PEG system.

C. Magnes, A. Paudel, D. Neshchadin, 2020, Journal of pharmaceutical and biomedical analysis.

Data-Driven Prediction of the Formation of Co-Amorphous Systems

A. Paudel, M. Brunsteiner, S. Mitsche, 2023, Pharmaceutics.

Feeding of particle-based materials in continuous solid dosage manufacturing: a material science perspective.

Satu Lakio, Johannes Khinast, Olaf Behrend, 2020, Drug discovery today.

Assessment of Tribo-charging and Continuous Feeding Performance of Direct Compression Grades of Isomalt and Mannitol Powders

A. Paudel, J. Kastner, M. Spoerk, 2023, AAPS PharmSciTech.

Machine Learning–Enabled NIR Spectroscopy. Part 2: Workflow for Selecting a Subset of Samples from Publicly Accessible Data

A. Paudel, Prakash Muthudoss, M. Ramalingam, 2023, AAPS PharmSciTech.

Assessment of Dry Powder Inhaler Carrier Targeted Design: A Comparative Case Study of Diverse Anomeric Compositions and Physical Properties of Lactose.

E. Roblegg, A. Paudel, J. Pinto, 2018, Molecular pharmaceutics.

Tribo-Charging Behaviour of Inhalable Mannitol Blends with Salbutamol Sulphate

J. Khinast, A. Paudel, M. Brunsteiner, 2019, Pharmaceutical Research.

Advances in experimental and mechanistic computational models to understand pulmonary exposure to inhaled drugs.

Sumit Arora, William Couet, Amrit Paudel, 2017, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Development and Validation of a Stability-Indicating UPLC Method for the Determination of Hexoprenaline in Injectable Dosage Form Using AQbD Principles

A. Paudel, V. Markó, D. Jeremic, 2021, Molecules.

Multi-methodological investigation of the variability of the microstructure of HPMC hard capsules.

J. Khinast, F. Stelzer, A. Kovalcik, 2016, International journal of pharmaceutics.

Improving the granule strength of roller-compacted ibuprofen sodium for hot-melt coating processing.

A. Zimmer, A. Paudel, Karin Becker, 2016, International journal of pharmaceutics.

Understanding Concomitant Physical and Chemical Transformations of Simvastatin During Dry Ball Milling

A. Paudel, Dattatray Modhave, Isha Saraf, 2020, AAPS PharmSciTech.

Evaluation of the Physico-mechanical Properties and Electrostatic Charging Behavior of Different Capsule Types for Inhalation Under Distinct Environmental Conditions

A. Paudel, F. Buttini, S. Biserni, 2020, AAPS PharmSciTech.

Polyethylene oxide matrix tablet swelling evolution: The impact of molecular mass and tablet composition

P. Laggner, A. Paudel, U. Mikac, 2020, Acta pharmaceutica.

Quantitative Chemical Profiling of Commercial Glyceride Excipients via1H NMR Spectroscopy

H. Weber, A. Paudel, Varun Kushwah, 2020, AAPS PharmSciTech.

Finite-Temperature Mechanical Properties of Organic Molecular Crystals from Classical Molecular Simulation

A. Paudel, M. Brunsteiner, L. M. Morgan, 2023, Crystal Growth & Design.

Impact of Different Saccharides on the In-Process Stability of a Protein Drug During Evaporative Drying: From Sessile Droplet Drying to Lab-Scale Spray Drying

A. Paudel, J. Pinto, Johanna Dieplinger, 2023, Pharmaceutical Research.

On the Influence of Raw Material Attributes on Process Behaviour and Product Quality in a Continuous Wet Granulation Tableting Line.

J. Khinast, A. Paudel, S. Sacher, 2023, International journal of pharmaceutics.

Theoretical and Experimental Investigation of Autoxidation Propensity of Selected Drugs in Solution State.

A. Ray, A. Paudel, M. Brunsteiner, 2023, Molecular pharmaceutics.

Neutralizing Antibody Validation Testing and Reporting Harmonization

Bonnie Wu, F. Civoli, R. Dodge, 2023, The AAPS Journal.

Applying material science principles to chemical stability: Modelling solid state autoxidation in Mifepristone containing different degrees of crystal disorder.

A. Ray, F. Hofer, A. Paudel, 2023, Journal of pharmaceutical sciences.

Pancreatic lipase digestion: The forgotten barrier in oral administration of lipid-based delivery systems?

A. Paudel, Varun Kushwah, O. Zupančič, 2023, Journal of controlled release : official journal of the Controlled Release Society.

Impact of simulated lung fluid components on the solubility of inhaled drugs and predicted in vivo performance.

E. Fröhlich, Gerfried Luschin-Ebengreuth, P. Laggner, 2021, International journal of pharmaceutics.

pH stimuli-responsive hydrogels from non-cellulosic biopolymers for drug delivery

A. Paudel, Dignesh Khunt, O. Zupančič, 2023, Frontiers in bioengineering and biotechnology.

Raman spectroscopy in pharmaceutical product design.

J. Rantanen, A. Paudel, Dhara K Raijada, 2015, Advanced drug delivery reviews.

Can compression induce demixing in amorphous solid dispersions? A case study of naproxen-PVP K25.

A. Paudel, G. Van den Mooter, Zelalem Ayenew, 2012, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.