P. Hass

发表

An autonomous shading system based on coupled wood bilayer elements

I. Burgert, M. Rüggeberg, C. Vailati, 2018 .

Upscaling of wood bilayers: design principles for controlling shape change and increasing moisture change rate

Markus Rüggeberg, Ingo Burgert, I. Burgert, 2017 .

The kinetics of wooden bilayers is not affected by different wood adhesive systems

I. Burgert, M. Rüggeberg, C. Vailati, 2018, Wood Science and Technology.

Mechanical Properties of Norway Spruce: Intra-Ring Variation and Generic Behavior of Earlywood and Latewood until Failure

F. Wittel, P. Niemz, P. Hass, 2013, 1509.04012.

Orthotropic hygric and mechanical material properties of oak wood

P. Niemz, P. Hass, Stefan Hering, 2016 .

The kinetics of wooden bilayers is not affected by different wood adhesive systems

I. Burgert, M. Rüggeberg, C. Vailati, 2018, Wood Science and Technology.

Adhesive penetration of hardwood: a generic penetration model

M. Mendoza, F. Wittel, P. Niemz, 2011, Wood Science and Technology.

A versatile strategy for grafting polymers to wood cell walls.

I. Burgert, N. Gierlinger, P. Hass, 2015, Acta biomaterialia.

Fully biodegradable modification of wood for improvement of dimensional stability and water absorption properties by poly(ε-caprolactone) grafting into the cell walls

I. Burgert, J. Koetz, P. Hass, 2014 .

Improvement of tensile shear strength and wood failure percentage of 1C PUR bonded wooden joints at wet stage by means of DMF priming

Peter Niemz, P. Niemz, P. Hass, 2014, European Journal of Wood and Wood Products.

Adhesive penetration in beech wood: experiments

Falk K. Wittel, Miller Mendoza, Hans J. Herrmann, 2011, Wood Science and Technology.

Pore space analysis of beech wood: The vessel network

Falk K. Wittel, M. Stampanoni, Hans J. Herrmann, 2010, 1509.03651.

Renewable and functional wood materials by grafting polymerization within cell walls.

I. Burgert, P. Hass, V. Merk, 2014, ChemSusChem.

Moisture-induced stresses and distortions in spruce cross-laminates and composite laminates

Thomas Gereke, Peter Niemz, T. Gereke, 2009 .

Influence of growth ring angle, adhesive system and viscosity on the shear strength of adhesive bonds

P. Niemz, P. Hass, C. Müller, 2009 .

Generic failure mechanisms in adhesive bonds

F. Wittel, P. Niemz, P. Hass, 2013, 1509.03437.

Influence of heat pressure steaming (HPS) on the mechanical and physical properties of common oak wood

T. Lorenz, T. Volkmer, P. Niemz, 2014, European Journal of Wood and Wood Products.

Adhesive penetration in Beech wood Part II: Penetration Model

H. Herrmann, M. Mendoza, F. Wittel, 2010, 1007.0761.

Penetration behavior of adhesives into solid wood and micromechanics of the bondline

P. Hass, Philipp Friedrich Siegfried Hass, 2012 .

Adhesive penetration in beech wood: experiments

H. Herrmann, M. Mendoza, F. Wittel, 2011, Wood Science and Technology.

Adhesive penetration of hardwood: a generic penetration model

H. Herrmann, M. Mendoza, F. Wittel, 2011, Wood Science and Technology.

Adhesive Penetration in Beech Wood Part I: Experiments

H. Herrmann, M. Mendoza, F. Wittel, 2010, 1007.0762.

MECHANICAL RESISTANCE OF ACETYLATED AND DENSIFIED

I. Burgert, P. Hass, T. Keplinger, 2016 .

Inverse determination of effective mechanical properties of adhesive bondlines

H. Herrmann, M. Mendoza, F. Wittel, 2012, European Journal of Wood and Wood Products.

Effects of mechanical and chemical surface preparation on adhesively bonded wooden joints

Peter Niemz, P. Niemz, P. Hass, 2014 .

Timber-mortar composites: The effect of sol-gel surface modification on the wood-adhesive interface

I. Burgert, P. Hass, V. Merk, 2018, Composite Structures.

Upscaling of wood bilayers: design principles for controlling shape change and increasing moisture change rate

I. Burgert, M. Rüggeberg, C. Vailati, 2017, Materials and Structures.