J. Schulz

发表

Effective modeling of high-energy laboratory-based x-ray phase contrast imaging utilizing absorption masks or gratings

M. Endrizzi, A. Olivo, I. Buchanan, 2020, Journal of Applied Physics.

Adhesion problems in deep-etch x-ray lithography caused by fluorescence radiation from the plating base

H. Oertel, H. Huber, F. Pantenburg, 1994 .

Development and characterization of ultra high aspect ratio microstructures made by ultra deep X-ray lithography

V. Nazmov, J. Mohr, E. Reznikova, 2015 .

Fully Batch Fabricated Magnetic Microactuators Using A Two Layer Liga Process

W. Menz, J. Schulz, Jürgen Mohr, 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

High resolution x-ray mask fabrication by a 100 keV electron-beam lithography system

J. Goettert, R. Fettig, J. Schulz, 2004 .

The influence of sloped absorber sidewalls in deep x-ray lithography

J. Mohr, J. Schulz, A. El-Kholi, 1993 .

Lithographic Fabrication of Mold Inserts

Volker Saile, Markus Guttmann, Joachim Schulz, 2005 .

Chapter 13 – Deep X-Ray Lithography

P. Meyer, V. Saile, J. Schulz, 2010 .

Optimization of laser writer-based UV lithography with high magnification optics to pattern X-ray lithography mask templates

S. Hengsbach, J. Mohr, S. Achenbach, 2018, Microsystem Technologies.

Towards real-time analysis of liquid jet alignment in serial femtosecond crystallography

A. Peele, A. Mancuso, J. Bielecki, 2022, Journal of applied crystallography.

Experimental results from a preclinical X-ray phase-contrast CT scanner

Franz Pfeiffer, Alexander Sasov, Martin Bech, 2012, Proceedings of the National Academy of Sciences.

Time resolved in-situ multi-contrast X-ray imaging of melting in metals

M. Endrizzi, C. Rau, S. Marussi, 2022, Scientific Reports.

Characterization method for new resist formulations for HAR patterns made by X-ray lithography

Pascal Meyer, Jürgen Mohr, Danays Kunka, 2014 .

LIGA micropump for gases and liquids

Werner Karl Schomburg, R. Rapp, D. Maas, 1994 .

Development of a prototype gantry system for preclinical x-ray phase-contrast computed tomography.

Franz Pfeiffer, Alexander Sasov, Martin Bech, 2011, Medical physics.

Note: Gratings on low absorbing substrates for x-ray phase contrast imaging.

A Faisal, F. Pfeiffer, P. Meyer, 2015, The Review of scientific instruments.

LIGA technology today and its industrial applications

Ulrike Wallrabe, Joachim Schulz, Song-Jo Chung, 2000, SPIE Optics East.

Non-destructive phase contrast hard x-ray imaging to reveal the three-dimensional microstructure of soft and hard tissues

Samiul Hasan, Bert Müller, Georg Schulz, 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

3D printed devices and infrastructure for liquid sample delivery at the European XFEL

A. Mancuso, J. Bielecki, Richard Bean, 2022, Journal of synchrotron radiation.

High aspect ratio gratings for X-ray phase contrast imaging

Juerg Leuthold, Jürgen Mohr, Johannes Kenntner, 2012 .

Increasing the field of view in grating based X-ray phase contrast imaging using stitched gratings.

A Faisal, J Herzen, F. Pfeiffer, 2016, Journal of X-ray science and technology.

Band pass filters in the 1 μm spectral region: Thick metal screens

J. Schulz, H. Grebel, H. Hein, 2008 .

Deep X-Ray Lithography

J. Schulz, P. Meyer, J. Schulz, 2015 .

MODULIGA: The LIGA process as a modular production method-current standardization status in Germany

B. Löchel, L. Hahn, P. Meyer, 2005 .

Fabrication of x-ray absorption gratings via deep x-ray lithography using a conventional x-ray tube

Franz Pfeiffer, Julia Herzen, Pascal Meyer, 2021, Journal of Micro/Nanopatterning, Materials, and Metrology.

Development of a sonovoltammetric cell for mass transport investigations in the LIGA-process under megasonic agitation

J. Schulz, K. Bade, L. Hahn, 2007 .

DoseSim: Microsoft-Windows graphical user interface for using synchrotron x-ray exposure and subsequent development in the LIGA process

Pascal Meyer, Lothar Hahn, Joachim Schulz, 2003 .

1 Fault Localization and Functional Testing of ICs by Lock-in Thermography

F. Altmann, J. Schulz, J. P. Rakotoniaina, 2002 .

Comparison of measurement methods for microsystem components: application to microstructures made by the deep x-ray lithography process (x-ray LIGA)

Pascal Meyer, Volker Saile, Joachim Schulz, 2009 .

Metrology study of high precision mm parts made by the deep x-ray lithography (LIGA) technique

Pascal Meyer, Volker Saile, Joachim Schulz, 2009 .

A MS-Windows simulation tool for synchrotron X-ray exposure and subsequent development

S. Megtert, L. Hahn, P. Meyer, 2002 .

Non-destructive characterisation of out-of-plane fibre waviness in carbon fibre reinforced polymers by X-ray dark-field radiography

S. Zabler, J. Schulz, J. Glinz, 2022, Nondestructive Testing and Evaluation.

Thick capacitive meshes on polyimide substrates

Herbert Hein, Oren Sternberg, Joachim Schulz, 2004 .

Optimization of laser writer-based UV lithography with high magnification optics to pattern X-ray lithography mask templates

S. Hengsbach, J. Mohr, S. Achenbach, 2018, Microsystem Technologies.

Multiphoton Fluorescence Imaging at Cryogenic Conditions

K. König, M. Stark, J. Schulz, 2007, Microscopy and Microanalysis.

Investigations of the development rate of irradiated PMMA Microstructures in deep X-ray lithography

Pascal Meyer, A. El-Kholi, Joachim Schulz, 2002 .