Weihong Li

发表

On Improving Full-Coverage Effusion Cooling Efficiency by Varying Cooling Arrangements and Wall Thickness in Double Wall Cooling Application

Xueying Li, Jing Ren, Hongde Jiang, 2018, Journal of Heat Transfer.

Bioinspired heat exchangers based on triply periodic minimal surfaces for supercritical CO2 cycles

Zhibin Yu, Weihong Li, Guopeng Yu, 2020, Applied Thermal Engineering.

A new cooling design for rib roughened two-pass channel having positive effects of rotation on heat transfer enhancement on both pressure and suction side internal walls of a gas turbine blade

S. Ekkad, Jing Ren, Weihong Li, 2017 .

Experimental and numerical investigation of heat transfer inside two-pass rib roughened duct (AR=1:2) under rotating and stationary conditions

S. Ekkad, Jing Ren, Weihong Li, 2017 .

Effect of Reynolds Number, Hole Patterns, and Target Plate Thickness on the Cooling Performance of an Impinging Jet Array—Part II: Conjugate Heat Transfer Results and Optimization

Xueying Li, Jing Ren, Hongde Jiang, 2017 .

Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets

Jing Ren, P. Ligrani, Weihong Li, 2016 .

Assessment of six turbulence models for modeling and predicting narrow passage flows, part 2: Pin fin arrays

Jing Ren, P. Ligrani, Y. Luan, 2016 .

Experimental Investigation of Local and Average Heat Transfer Coefficients Under an Inline Impinging Jet Array, Including Jets With Low Impingement Distance and Inclined Angle

Jing Ren, Hongde Jiang, Weihong Li, 2017 .

Effect of Reynolds Number, Hole Patterns, and Hole Inclination on Cooling Performance of an Impinging Jet Array—Part I: Convective Heat Transfer Results and Optimization

Xueying Li, Jing Ren, Hongde Jiang, 2017 .

Analysis of operating diagram for H2/Air rotating detonation combustors under lean fuel condition

B. Wang, P. Wolański, Weihong Li, 2018 .

Effect of thermal boundary conditions and thermal conductivity on conjugate heat transfer performance in pin fin arrays

Jing Ren, Hongde Jiang, Weihong Li, 2016 .

Wall thickness and injection direction effects on flat plate full-coverage film cooling arrays: Adiabatic film effectiveness and heat transfer coefficient

Xueying Li, Jing Ren, Hongde Jiang, 2019, International Journal of Thermal Sciences.

Effect of Reynolds Number, Hole Patterns, Target Plate Thickness on Cooling Performance of an Impinging Jet Array: Part II — Conjugate Heat Transfer Results and Optimization

Jing Ren, Li Yang, Hongde Jiang, 2016 .

A Novel Method for Designing Fan-Shaped Holes With Short Length-to-Diameter Ratio in Producing High Film Cooling Performance for Thin-Wall Turbine Airfoil

Xueying Li, Jing Ren, Hongde Jiang, 2018, Journal of Turbomachinery.

On the Flow Structures and Adiabatic Film Effectiveness for Simple and Compound Angle Hole With Varied Length-to-Diameter Ratio by Large Eddy Simulation and Pressure-Sensitive Paint Techniques

Wei Shi, Xueying Li, Jing Ren, 2017 .

Generative Design of Internal Cooling Channels for Gas Turbine Blades

Weihong Li, Zijie Lu, Li Yang, 2022, Proceedings of Global Power & Propulsion Society.

Effect of pressure on corrosion behavior of X60, X65, X70, and X80 carbon steels in water-unsaturated supercritical CO2 environments

Zhe Wang, Weihong Li, Xiaoxian Yang, 2016 .

Large eddy simulation of compound angle hole film cooling with hole length-to-diameter ratio and internal crossflow orientation effects

Xueying Li, Jing Ren, Weihong Li, 2017 .

Geothermally Sourced Combined Power and Freshwater Generation for Eastern Africa

A. Boyce, S. Rane, Zhibin Yu, 2019 .

Flow and heat transfer characteristics of micro pin-fins under jet impingement arrays

Jing Ren, P. Ligrani, Weihong Li, 2019, International Journal of Heat and Mass Transfer.

Influence of Topology on Heat Transfer in a Double Wall Cooling Channel: Potential of Series-Linked Jets

M. Chyu, Jing Ren, Weihong Li, 2016 .

High resolution measurements of film cooling performance of simple and compound angle cylindrical holes with varying hole length-to-diameter ratio—Part I: Adiabatic film effectiveness

Jing Ren, Weihong Li, Xunfeng Lu, 2018 .

Influences of Micro Pin-Fin on Jet Array Impingement Heat Transfer: Effects of Jet to Target Distance, Micro Pin-Fin Shapes, Height, and Reynolds Number

Jing Ren, Weihong Li, Xunfeng Lu, 2018, Volume 5A: Heat Transfer.

Experimental investigation of wall thickness and hole shape variation effects on full-coverage film cooling performance for a gas turbine vane

Jing Ren, Weihong Li, Hongde Jiang, 2018, Applied Thermal Engineering.

A study of particle flow in a ribbon reactor: Effect of ribbon configuration on mixing and heat transfer performance

Weihong Li, S. Gong, Zhijian Zuo, 2023, Energy.