Dongsheng Li

发表

Composite coating prepared by micro-arc oxidation followed by sol–gel process and in vitro degradation properties

Liguo Wang, Junhua Hu, Yi Zhang, 2012 .

Study on the clamping capacity of profile jaws based on finite element analysis

Dongsheng Li, Tongsheng Deng, Xiao-qiang Li, 2015 .

Coefficient of Friction for Aluminum Alloy Sheet in Contact with Polyurethane Rubber

Wei-jun Yang, Dongsheng Li, Xiao-qiang Li, 2010 .

A Review on Part Geometric Precision Improvement Strategies in Double-Sided Incremental Forming

Yanle Li, Dongsheng Li, Xiao-qiang Li, 2022, Metals.

A toolpath strategy for improving geometric accuracy in double-sided incremental sheet forming

Yanle Li, Dongsheng Li, Xiao-qiang Li, 2021, Chinese Journal of Aeronautics.

Process design for multi-stage stretch forming of aluminium alloy aircraft skin

Wei-jun Yang, Dongsheng Li, Xiao-qiang Li, 2010 .

Experimental and theoretical analysis of the thickness distribution in multistage two point incremental sheet forming

K. Han, Haibo Wang, Yanle Li, 2020 .

Temperature variation model of titanium alloy L-angle profile in hot stretch forming with resistance heating

Dongsheng Li, Tongsheng Deng, Xiao-qiang Li, 2018 .

Experimental and numerical study on the deformation mechanism of straight flanging by incremental sheet forming

K. Han, Haibo Wang, Yanle Li, 2019, International Journal of Mechanical Sciences.

Finite element simulation and process optimization for hot stretch bending of Ti-6Al-4V thin-walled extrusion

Dongsheng Li, Tongsheng Deng, Xiao-qiang Li, 2017 .

An Experimental and Modelling Study of Cyclic Tension-Compression Behavior of Aa7075-T6 Under Electrically-Assisted Condition

T. Balan, Dongsheng Li, Xiao-qiang Li, 2022, SSRN Electronic Journal.

Formation mechanism and modeling of surface waviness in incremental sheet forming

Yanle Li, Dongsheng Li, Xiao-qiang Li, 2022, Frontiers of Mechanical Engineering.

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

Haibo Wang, Xu Song, Yanle Li, 2020 .

Multi-Stage Two Point Incremental Sheet Forming

Dongsheng Li, Xiao-qiang Li, Kai Han, 2018, Journal of Physics: Conference Series.

Process parameters optimization of Ti-6Al-4V alloy sheet during hot stretch-creep forming

Dongsheng Li, Xiao-qiang Li, Pan Ding, 2015 .

Modelization and comparison of Norton-Hoff and Arrhenius constitutive laws to predict hot tensile behavior of Ti-6Al-4V alloy

Dongsheng Li, Xiao-qiang Li, C. Jin, 2012 .

Fast simulation of incremental sheet metal forming by multi-tooling

Dongsheng Li, Xiao-qiang Li, Sattar Ullah, 2022, Journal of Manufacturing Processes.

Experimental and theoretical analysis of the thickness distribution in multistage two point incremental sheet forming

Yanle Li, Dongsheng Li, Peng Xu, 2020, The International Journal of Advanced Manufacturing Technology.

Creep deformation and strength evolution mechanisms of a Ti-6Al-4V alloy during stress relaxation at elevated temperatures from elastic to plastic loading

Shiteng Zhao, Dongsheng Li, Xiao-qiang Li, 2022, Journal of Materials Science & Technology.

Study on nonuniform deformation behavior and mechanical properties of complex-shaped Ti-6Al-4 V extruded profiles with different lubrication conditions

Dongsheng Li, Xiao-qiang Li, Yong Li, 2022, The International Journal of Advanced Manufacturing Technology.

A Unified Constitutive Model of Stress Relaxation of Ti-6Al-4V Alloy with Different Temperatures from Elastic to Plastic Loading

Dongsheng Li, Xiao-qiang Li, Yong Li, 2022, Machines.

Numerical simulation and process optimization for hot stretch bending of Ti-6.5Al-2Zr-1Mo-1V large-section extrusion

Dongsheng Li, Chen Zhang, Qin-xiang Xia, 2020 .

Material characterization, constitutive modeling and validation in hot stretch bending of Ti–6Al–4V profile

Dongsheng Li, Tongsheng Deng, Xiao-qiang Li, 2016 .

Hot Tensile Deformation Behavior of Ti-6Al-4V Titanium Alloy Made by Laser Melting Deposition

Dongsheng Li, Xiao-qiang Li, Haiyang Lv, 2022, Machines.

High Temperature Mechanical Properties and Microstructure Evolution of Ti-6Al-4V Alloy Linear Friction Welding Joints

Dongsheng Li, Xiao-qiang Li, Chen Zhang, 2022, Machines.

Constitutive modeling and the effects of strain-rate and temperature on the formability of Ti–6Al–4V alloy sheet

Xiao Junjie, Dongsheng Li, Xiao-qiang Li, 2014 .

Temperature variation model of titanium alloy L-angle profile in hot stretch forming with resistance heating

Dongsheng Li, Tongsheng Deng, Xiao-qiang Li, 2017, The International Journal of Advanced Manufacturing Technology.

An Experimental Study of the Tension-Compression Asymmetry of Extruded Ti-6.5Al-2Zr-1Mo-1V under Quasi-Static Conditions at High Temperature

Dongsheng Li, Xiao-qiang Li, Chen Zhang, 2021, Metals.

Bending compensated surface mechanical grinding treatment overcoming the strength-ductility trade-off in thin copper sheet

Dongsheng Li, Xiao-qiang Li, Kai Han, 2021, Materials Science and Engineering: A.

Single-point incremental forming of 2024-T3 aluminum alloy sheets

Dongsheng Li, Xiao-qiang Li, G. Guo, 2013 .

Effect of strain rate difference between inside and outside groove in M−K model on prediction of forming limit curve of Ti6Al4V at elevated temperatures

Dongsheng Li, Xiao-qiang Li, G. Guo, 2020 .

Process Planning and Simulation Strategies for Perimeter Milling of Thin-walled Flexible Parts Held by Reconfigurable Fixturing System

Dongsheng Li, Fuwen Hu, Dongsheng Li, 2011, 2011 Third International Conference on Measuring Technology and Mechatronics Automation.

An experimental study on the effect of bolt-hole clearance and bolt torque on single-lap, countersunk composite joints

Dongsheng Li, Xiao-qiang Li, Liang Wang, 2015 .

Helicopter flight simulation trim in the coordinated turn with the hybrid genetic algorithm

Chun Liu, Wei Wang, Dongsheng Li, 2019 .

Optimization on springback reduction in cold stretch forming of titanium-alloy aircraft skin

Xiao-qiang Li, De-hua He, Dong-sheng Li, 2010 .

Modelling and Simulation of Milling Forces Using an Arbitrary Lagrangian–Eulerian Finite Element Method and Support Vector Regression

Dongsheng Li, Fuwen Hu, Dongsheng Li, 2012, J. Optim. Theory Appl..

A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming

Yanle Li, Dongsheng Li, Xiao-qiang Li, 2022, Archives of Civil and Mechanical Engineering.

Experimental and numerical investigation for sheet thickness thinning in two-point incremental forming (TPIF)

Dongsheng Li, Xiao-qiang Li, Sattar Ullah, 2022, The International Journal of Advanced Manufacturing Technology.

The flow behavior and forming limit modeling of an Al-Cu-Mg aluminum alloy sheet considering the effects of pre-strain and solution heat treatment

Dongsheng Li, Xiao-qiang Li, Hongju Gao, 2015 .

Influence of the fiber laser cutting parameters on the mechanical properties and cut−edge microfeatures of a AA2B06−T4 aluminum alloy

Dongsheng Li, Antonio Riveiro Rodríguez, Xiao-qiang Li, 2022, Optics & Laser Technology.

Effect of Carbon Nanotube on the Oscillating Wear Behaviour of Metal-PTFE Multilayer Composites

Dongsheng Li, A. Zou, 2018, Journal of Wuhan University of Technology-Mater. Sci. Ed..

An experimental study on the effect of joining interface condition on bearing response of single-lap, countersunk composite-aluminum bolted joints

Dongsheng Li, Xiao-qiang Li, Liang Wang, 2015 .