A. Robin

发表

Preparation and characterization of Ti–Ta alloys for application in corrosive media

K. D. Souza, A. Robin, 2003 .

Corrosion behavior of niobium, tantalum and their alloys in boiling sulfuric acid solutions

A. Robin, 1997 .

Improving corrosion resistance of Ti-6Al-4V alloy through plasma-assisted PVD deposited nitride coatings

A. Robin, V. Oliveira, C. Aguiar, 2014 .

Electrolytic coating of titanium onto iron and nickel electrodes in the molten LiF + NaF + KF eutectic

A. Robin, J. D. Lepinay, M. Barbier, 1987 .

Influence of concentration and temperature on the corrosion behavior of titanium, titanium-20 and 40% tantalum alloys and tantalum in sulfuric acid solutions

K. D. Souza, A. Robin, K. Souza, 2007 .

Corrosion behavior of the Ti–4% Al–4% V alloy inboiling nitric acid solutions

H. Sandim, A. Robin, J. L. Rosa, 1999 .

Production and Characterization of Copper-Niobium Composite Electrocoatings

A. Robin, J. L. Rosa, Messias Borges Silva, 2014 .

Electrodeposition and characterization of Cu–Nb composite coatings

M. B. Silva, A. Robin, J. L. Rosa, 2010 .

ELECTRODEPOSITION OF COPPER AS A ROUTE FOR TANTALUM DRAWING

A. Robin, J. L. Rosa, K. C. Alves de Souza, 2002 .

Woodgrain defect on tinned steel Flandres foil

A. Robin, P. Suzuki, A. M. Sarkis, 2011 .

Production and characterization of electrolytic nickel-niobium composite coatings

A. Robin, R. Q. Fratari, 2006 .

Corrosion Behavior Analysis of Plasma-assited PVD Coated Ti-6Al-4V alloy in 2 M NaOH Solution

A. Robin, V. Oliveira, C. Aguiar, 2017 .

Nitride coatings improve Ti-6Al-4V alloy behavior in creep tests

A. Robin, V. Oliveira, C. Aguiar, 2016 .

Influence of temperature on the reduction mechanism of Ti(III) ions on iron in the LiF–NaF–KF eutectic melt and on the electrochemical behavior of the resultant titanium coatings

A. Robin, 2005 .

Behavior of titanium electrocoatings on nickel in fluoride melts

A. Robin, 1998 .

Determination of the apparent standard potential of the Ti/Ti(III) system in the LiFNaFKF eutectic using voltammetry, chronopotentiometry and open-circuit potentiometry

A. Robin, J. D. Lepinay, 1991 .

Cathodic Film formation during Chromium Electrolysis on Low-carbon Steel using short duration current steps

A. Robin, W. Rosas, 2001 .

Electrodeposition of copper on titanium wires: Taguchi experimental design approach

Messias Borges Silva, Jorge Luiz Rosa, M. B. Silva, 2009 .

Effect of electrodeposition conditions on the properties of Cu-Si3N4 composite coatings

M. Eslami, F. Golestani-Fard, H. Saghafian, 2014 .

Influence of the Solution-Treatment Temperature and Short Aging Times on The Electrochemical Corrosion Behaviour of Uns S32520 Super Duplex Stainless Steel

N. A. Mariano, L. C. Valeriano, A. Robin, 2019, Materials Research.

Effect of cold-working process on corrosion behavior of copper

A. Robin, P. Suzuki, Gustavo Aristides Santana Martínez, 2012 .

High pressure study and electronic structure of the super-alloy HfIr3

O. Yeheskel, A. Robin, Jingzhu Hu, 2010 .

High pressure study and electronic structure of the super-alloy HfIr 3

O. Yeheskel, A. Robin, I. Yaar, 2005 .

Study on tribological behavior of electrodeposited Cu–Si3N4 composite coatings

M. Eslami, F. Golestani-Fard, H. Saghafian, 2014 .

Corrosion Behaviour of Niobium in Sodium Hydroxide Solutions

A. Robin, 2004 .

Comparative study of Nb, Nb–10W, and Nb–16Ta–12W corrosion behavior in sodium hydroxide solutions

A. Robin, 2004 .

Corrosion behavior of niobium, tantalum and their alloys in hot hydrochloric and phosphoric acid solutions

A. Robin, J. L. Rosa, 2000 .

Influence of fluoride concentration and pH on corrosion behavior of titanium in artificial saliva

A. Robin, J. P. Meirelis, 2007 .

Effect of pH and Fluoride on Behavior of Dental ZrO2 Ceramics in Artificial Saliva

A. Robin, J. Machado, L.E. Mukaeda, 2010 .

Corrosion behaviour of Ta-10 wt-%W alloy in sodium hydroxide solutions

A. Robin, 2003 .

Corrosion behavior of HA-316L SS biocomposites in aqueous solutions

A. Robin, J. L. Rosa, G. Silva, 2013 .

Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys

R. Caram, A. Robin, R. Contieri, 2014 .

EIS study of Ti–23Ta alloy in artificial saliva

Arif Hasan Khan Robin, A. Robin, J. P. Meirelis, 2009 .

Electrochemical behavior of three CP titanium dental implants in artificial saliva

A. Robin, Gustavo Aristides Santana Martínez, Norma Terumi Kadowaki, 2009 .

Corrosion Behavior of AA7075-T73 Aluminum Alloy During Machining of Aeronautical Components

A. Robin, M. Faria, L. P. Prisco, 2019, Materials Research.

Protective effect of plasma-assisted PVD deposited coatings on Ti–6Al–4V alloy in NaCl solutions

A. Robin, V. Oliveira, C. Aguiar, 2015 .

Degradation behavior of niobium in molten aluminum

H. Sandim, A. Robin, 2002 .

Contribution of ion emission to sputtering of uranium dioxide by highly charged ions

A. Robin, H. Rothard, B. Manil, 2005 .

Corrosion behaviour of tantalum in sodium hydroxide solutions

A. Robin, 2003 .

Nb–Ta alloys by aluminothermic reduction of Nb2O5/Ta2O5 mixtures and electron beam melting

C. A. Nunes, A. Robin, D. G. Pinatti, 1999 .

Corrosion Behaviour of Ti–4Al–4V Alloy in Nitric, Phosphoric and Sulfuric acid Solutions at Room Temperature

H. Sandim, A. Robin, J. L. Rosa, 2001 .

Intensity-dependent ultrasonic attenuation in a metallic glass at low temperatures

A. Robin, A. Levelut, P. Doussineau, 1978 .

Vibratory Stress Relief and Vibratory Weld Conditioning of Flux cored arc welded CA6NM steel

C. A. Nunes, A. Robin, Luiz Fernando Cursino Briet de Almeida, 2019 .

Co-electrodeposition and characterization of Cu–Si3N4 composite coatings

A. Robin, A. F. Sartori, J. Santana, 2011 .

Characterization of copper–silicon nitride composite electrocoatings

A. Robin, A. F. Sartori, J. Santana, 2010 .

Electrochemical study of the anodic dissolution of iron and nickel in the molten LiFNaFKF eutectic at 600°C using convolutional voltammetry

A. Robin, J. D. Lepinay, 1992 .

Deposition and characterization of nickel–niobium composite electrocoatings

A. Robin, R. Q. Fratari, 2007 .

Preparation and characterization of Zircaloy 4-Tantalum alloys for application in corrosive media

C. A. Nunes, C. Baldan, A. Robin, 2012 .

Formation of TiO2 Nanotube Layer by Anodization of Titanium in Ethylene Glycol-H2O Electrolyte

M. B. Silva, A. Robin, R. Z. Nakazato, 2014 .

Processing of Nb–10W alloy via aluminothermic reduction–electron beam melting and evaluation of its cold plastic deformation behaviour

H. Sandim, C. A. Nunes, A. Robin, 2018 .

Formation of TiO 2 Nanotube Layer by Anodization of Titanium in Ethylene Glycol-H 2 O Electrolyte

M. B. Silva, A. Robin, R. Z. Nakazato, 2014 .

Non-Destructive Evaluation of Protective Coatings on AA2024-T3 Aluminum Alloy Used in Aeronautical Parts by Electrochemical Impedance Spectroscopy

Degradation of Y2O3-Stabilized ZrO2 Ceramics in Artificial Saliva: ICP Analysis of Dissolved Y3+ and Zr4+ Ions

Simone Pereira Taguchi, A. Robin, L.E. Mukaeda, 2012 .