Giuseppe Pitarresi

发表

Design and Manufacturing of Automotive Structures Using Composite Materials (Special Issue of the International Journal of Vehicle Design)

F Cappello, J Carruthers, Giuseppe Pitarresi, 2007 .

Review of photoelastic image analysis applied to structural birefringent materials: glass and polymers

Giovanni Petrucci, Michele Scafidi, Giuseppe Pitarresi, 2015 .

Refitting of an eco-friendly sailing yacht: numerical prediction and experimental validation

Davide Tumino, Giuseppe Pitarresi, Antonio Mancuso, 2017 .

A comparative evaluation of crashworthy composite sandwich structures

Jose Maria Kenny, Giuseppe Pitarresi, S Ingleton, 2007 .

Using FEM simulation to predict structural performances of a sailing dinghy

Davide Tumino, Antonio Mancuso, Giuseppe Pitarresi, 2018 .

The Transverse Crack Tension test revisited: An experimental and numerical study

F. P. van der Meer, Giuseppe Pitarresi, Antonino Valenza, 2016 .

Topological Optimization of a Structural Naval Component Manufactured in FDM

Davide Tumino, Antonio Mancuso, Giuseppe Pitarresi, 2019 .

The future use of structural composite materials in the automotive industry

Enrico Mangino, Giuseppe Pitarresi, Jj Carruthers, 2007 .

On the history of torsional stress concentrations in shafts: From electrical analogies to numerical methods

Giuseppe Pitarresi, Vincenzo Nigrelli, Augusto Ajovalasit, 2014 .

Thermoelastic signal processing using an FFT lock-in based algorithm on extended sampled data

Giuseppe Pitarresi, Leonardo D'Acquisto, A. M. Siddiolo, 2009 .

Lock-In Signal Post-Processing Techniques in Infra-Red Thermography for Materials Structural Evaluation

Giuseppe Pitarresi, G. Pitarresi, 2015 .

Thermal NDE of thick GRP panels by means of a Pulse Modulated Lock-In Thermography technique

Giuseppe Pitarresi, 2010 .

The effect of through-thickness compressive stress on mode II interlaminar fracture toughness

Pedro P. Camanho, F. P. van der Meer, Giuseppe Pitarresi, 2017 .

Detection and characterisation of disbonds on Fibre Metal Laminate hybrid composites by flying laser spot thermography

Donatella Cerniglia, Giuseppe Pitarresi, Nicola Montinaro, 2017 .

Thermoelastic stress analysis of a 2D stress field using a single detector infrared scanner and lock-in filtering

Giuseppe Pitarresi, Leonardo D'Acquisto, A Normanno, 2009 .

An investigation of the influence of macroscopic heterogeneity on the thermoelastic response of fibre reinforced plastics

Eann A. Patterson, Giuseppe Pitarresi, M. S. Found, 2005 .

A Quantitative Analysis of the Thermoelastic Effect in CFRP Composite Materials

Umberto Galietti, Giuseppe Pitarresi, G. Pitarresi, 2010 .

Evaluation of interlaminar delaminations in titanium-graphite fibre metal laminates by infrared NDT techniques

Donatella Cerniglia, Giuseppe Pitarresi, Nicola Montinaro, 2018, NDT & E International.

Mechanical Behaviour of a Green Sandwich Made of Flax Reinforced Polymer Facings and Cork Core

Davide Tumino, Antonio Mancuso, Giuseppe Pitarresi, 2015 .

Implementation of Active Infrared NDT Techniques Using Long Square Heating Pulses

Giuseppe Pitarresi, G. Pitarresi, 2012 .

Investigation on the Influence of the Surface Resin Rich Layer on the Thermoelastic Signal from Different Composite Laminate Lay-Ups

Umberto Galietti, Giuseppe Pitarresi, G. Pitarresi, 2005 .

Defect detection in additively manufactured titanium prosthesis by flying laser scanning thermography

Donatella Cerniglia, Giuseppe Pitarresi, Nicola Montinaro, 2018 .