J. Moore

发表

Impact of Bearing Clearance on Measured Stiffness and Damping Coefficients and Thermal Performance of a High-Stiffness Generation 3 Foil Journal Bearing

Jason C. Wilkes, Aaron M. Rimpel, Jonathan L. Wade, 2016 .

Development of a High Speed Gas Bearing Test Rig to Measure Rotordynamic Force Coefficients

Andrew H. Lerche, J. Moore, D. Lubell, 2011 .

DEVELOPMENT OF HIGH EFFICIENCY HOT GAS TURBO-EXPANDER FOR OPTIMIZED CSP SUPERCRITICAL CO2 POWER BLOCK OPERATION

J. Moore, C. Kalra, Edip Sevincer, 2014 .

Testing of A 10 MWE Supercritical CO2 Turbine

J. Moore, D. Hofer, Stefan D. Cich, 2018 .

Planning for Successful Transients and Trips in a 1 MWe-Scale High-Temperature sCO2 Test Loop

J. Moore, T. Allison, D. Hofer, 2018, Journal of Engineering for Gas Turbines and Power.

Three-Dimensional CFD Rotordynamic Analysis of Gas Labyrinth Seals

J. Jeffrey Moore, J. Moore, 2003 .

Rotordynamic Force Prediction of Whirling Centrifugal Impeller Shroud Passages Using Computational Fluid Dynamic Techniques

Alan Palazzolo, J. Jeffrey Moore, A. Palazzolo, 1999 .

Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical Co2 Expander

Adolfo Delgado, J. Moore, B. Ertas, 2017 .

Low-Leakage Shaft-End Seals for Utility-Scale Supercritical CO2 Turboexpanders

J. Jeffrey Moore, Grant O. Musgrove, Timothy C. Allison, 2016 .

Turbomachinery Overview for Supercritical CO2 Power Cycles

Jason C. Wilkes, J. Moore, T. Allison, 2017 .

Rotordynamic Stability Measurement During Full-Load, Full-Pressure Testing Of A 6000 Psi Reinjection Centrifugal Compressor.

J. Jeffrey Moore, Mark J. Kuzdzal, J. Moore, 2002 .

Novel Concepts & Research

J. Jeffrey Moore, Karl Wygant, Harry Miller, 2019, Compression Machinery for Oil and Gas.

Heat engine-based storage systems

R. Kurz, C. Markides, M. Simpson, 2021 .

Dynamic Stress Prediction in Centrifugal Compressor Blades Using Fluid Structure Interaction

J. Jeffrey Moore, Andrew H. Lerche, James Hardin, 2012 .