J. Ouyang

发表

Improved SPH Approach to Branched Polymer Free Surface Flows Based on the XPP Model

T. Jiang, J. Ouyang, Lin Zhang, 2011 .

Numerical simulation of 3D-unsteady viscoelastic free surface flows by improved smoothed particle hydrodynamics method

T. Jiang, J. Ouyang, Xiaoyang Xu, 2012 .

Numerical investigation of non-isothermal viscoelastic filling process by a coupled finite element and discontinuous Galerkin method

J. Ouyang, Puyang Gao, Xiaodong Wang, 2019, International Journal of Heat and Mass Transfer.

Numerical simulation of polymer filling process by a combined finite element/discontinuous Galerkin/level set method

J. Ouyang, Puyang Gao, Wen Zhou, 2018, The Canadian Journal of Chemical Engineering.

Modeling and simulation of the viscoelastic fluid mold filling process by level set method

Chuntai Liu, J. Ouyang, Qiang Li, 2010 .

Modelling and simulation of moving interfaces in gas-assisted injection moulding process

T. Jiang, J. Ouyang, Qiang Li, 2011 .

Simulations of a full three‐dimensional packing process and flow‐induced stresses in injection molding

J. Ouyang, Xuejuan Li, Qiang Li, 2012 .

A SPH-based particle method for simulating 3D transient free surface flows of branched polymer melts

J. Ouyang, Xiaoyang Xu, 2013 .

SPH simulations of 2D transient viscoelastic flows using Brownian configuration fields

J. Ouyang, Xiaoyang Xu, Wuming Li, 2014 .

A corrected symmetric SPH method to simulate viscoelastic free surface flows based on the PTT model

T. Jiang, J. Ouyang, Qiang Li, 2012 .

The SPH approach to the process of container filling based on non-linear constitutive models

T. Jiang, J. Ouyang, Lin Zhang, 2012 .

New approach to develop a 3D non-isothermal computational framework for injection molding process based on level set method☆

J. Ouyang, Qingsheng Liu, Xin Zhuang, 2016 .

3D Numerical Simulation of Gas-assisted Injection Molding

J. Ouyang, Xuejuan Li, Qiang Li, 2010, 2010 Third International Conference on Information and Computing.

An improved finite difference/finite element method for the fractional Rayleigh–Stokes problem with a nonlinear source term

Z. Guan, J. Ouyang, Xiaodong Wang, 2020 .

Active- and transfer-learning applied to microscale-macroscale coupling to simulate viscoelastic flows

G. Karniadakis, B. Caswell, Zhen Li, 2020, J. Comput. Phys..

Research on a Numerical Schemes for Capturing Free Front during Injection Molding

J. Ouyang, Lin Zhang, Supei Zheng, 2009 .

Dynamic Simulation of Fusion Process and Analysis of Flow Field

Ling Zhang, Jie Ouyang, Supei Zheng, 2007 .

A 3D phase-field model for simulating the crystal growth of semi-crystalline polymers

J. Ouyang, Xiaodong Wang, Wen Zhou, 2017 .

Simulation of complex filling process based on the generalized Newtonian fluid model using a corrected SPH scheme

T. Jiang, J. Ouyang, Qiang Li, 2012 .

Simulations of viscoelastic fluids using a coupled lattice Boltzmann method: Transition states of elastic instabilities

J. Ouyang, Jin Su, Lei Ma, 2017 .

A Global Optimization Method for Minimizing a Product of Two Positive Convex Functions 1

Yuelin Gao, J. Ouyang, Guorong Wu, 2008 .

Visualization and simulation of filling process of simultaneous co-injection molding based on level set method

J. Ouyang, Wuming Li, Qingsheng Liu, 2015 .

Numerical simulation of the polymer crystallization during cooling stage by using level set method

J. Ouyang, Xiaodong Wang, Z. J. Liu, 2015 .

Numerical simulation of the sequential coinjection molding process based on level set method

J. Ouyang, Lin Zhang, Xiaoyang Xu, 2015 .

Simulating free surface flow problems using hybrid particle element free Galerkin method

T. Jiang, J. Ouyang, Xiaodong Wang, 2012 .

Coupling of finite element method and discontinuous Galerkin method to simulate viscoelastic flows

J. Ouyang, Puyang Gao, Wen Zhou, 2018 .

Numerical study of a single drop impact onto a liquid film up to the consequent formation of a crown

Xiaodong Wang, T. Jiang, J. Ouyang, 2013 .

An efficient stabilized finite element scheme for simulating viscoelastic flows

J. Ouyang, Xiaodong Wang, Yong Chai, 2021, International Journal for Numerical Methods in Fluids.

Simulations of Three-dimensional Thermal ResidualStress andWarpage in Injection Molding

J. Ouyang, Xuejuan Li, Wen Zhou, 2013 .

The effects of wall roughness on the methane flow in nano-channels using non-equilibrium multiscale molecular dynamics simulation

J. Ouyang, Xiaodong Wang, Wuming Li, 2017 .

Constitutive equations of non-isothermal polymer melt

J. Ouyang, Hongping Zhang, Chunlei Ruan, 2011 .

Lattice Boltzmann Method for Simulating Phase Separation of Sheared Binary Fluids with Reversible Chemical Reaction

Jianwei Liu, Xiaoyu Wang, Heng Yang, 2017 .

Development of new finite volume schemes on unstructured triangular grid for simulating the gas–liquid two‐phase flow

Jie Ouyang, Jin Su, Binxin Yang, 2016 .

On the superiority of the mixed element free Galerkin method for solving the steady incompressible flow problems

J. Ouyang, Xiaodong Wang, Bin-Xin Yang, 2012 .

An efficient fully atomistic potential model for dense fluid methane

J. Ouyang, Wuming Li, Xin Zhuang, 2016 .

Warpage Optimization in Injection Molding Using MPSO−HNN and MPSO Algorithm

T. Jiang, J. Ouyang, Xuejuan Li, 2010 .

Simulating the Rayleigh-Taylor instability in polymer fluids with dissipative particle dynamics

Xingguo Geng, J. Ouyang, Xin Zhuang, 2016 .

A corrected smoothed particle hydrodynamics method for solving transient viscoelastic fluid flows

T. Jiang, J. Ouyang, Qiang Li, 2011 .

Parametric study of fluid–solid interaction for single-particle dissipative particle dynamics model

J. Ouyang, Yanggui Li, Yi Wang, 2018, Microfluidics and Nanofluidics.

Prediction of Flow Effect on Crystal Growth of Semi-Crystalline Polymers Using a Multi-Scale Phase-Field Approach

Jie Ouyang, Ying Liu, Xiaodong Wang, 2017, Polymers.

A phase-field model for simulating various spherulite morphologies of semi-crystalline polymers

J. Ouyang, Xiaodong Wang, Wen Zhou, 2013 .

An improved element-free Galerkin method for solving the generalized fifth-order Korteweg—de Vries equation

Xiao-dong Wang, J. Ouyang, Zhaohui Feng, 2013 .

Simulation of fiber reinforced composite materials mold filling process and mechanical properties an

J. Ouyang, Xuejuan Li, Bin-Xin Yang, 2011 .

A high-order SRCR-DG method for simulating viscoelastic flows at high Weissenberg numbers

J. Ouyang, Xiaodong Wang, Mengxia Ma, 2022, Engineering with Computers.

Studying the viscosity of methane fluid for different resolution levels models using Poiseuille flow in a nano-channel

J. Ouyang, Wuming Li, Qingsheng Liu, 2016, Microfluidics and Nanofluidics.

A hybrid multiscale dissipative particle dynamics method coupling particle and continuum for complex fluid

D. Zang, Xingguo Geng, J. Ouyang, 2015, Microfluidics and Nanofluidics.

The effects of wall roughness on the methane flow in nano-channels using non-equilibrium multiscale molecular dynamics simulation

J. Ouyang, Xiaodong Wang, Wuming Li, 2017, Microfluidics and Nanofluidics.

Analysis of the Energy Stability for Stabilized Semi-implicit Schemes of the Functionalized Cahn-Hilliard Mass-conserving Gradient Flow Equation

J. Ouyang, Xiaodong Wang, Yong Chai, 2021, Journal of Scientific Computing.

Numerical analysis of the impact of two droplets with a liquid film using an incompressible SPH method

Tao Jiang, J. Ouyang, Xiaoyang Xu, 2013, Journal of Engineering Mathematics.

The SPH approach to the process of container filling based on non-linear constitutive models

T. Jiang, J. Ouyang, Lin Zhang, 2012, Acta Mechanica Sinica.

Simulation of complex filling process based on the generalized Newtonian fluid model using a corrected SPH scheme

Tao Jiang, J. Ouyang, Qiang Li, 2011, Computational Mechanics.

Numerical study of a single drop impact onto a liquid film up to the consequent formation of a crown

X. Li, T. Jiang, J. Ouyang, 2013, Journal of Applied Mechanics and Technical Physics.

Numerical simulation of flow-induced stresses in mold filling process using a three-dimensional two-phase flow model

J. Ouyang, Wen Zhou, Bin-Xin Yang, 2015, Archive of Applied Mechanics.

Simulation of polymer molding filling process with an adaptive weld line capturing algorithm

J. Ouyang, Wen Zhou, Bin-Xin Yang, 2010, International Journal of Material Forming.

Parametric study of fluid–solid interaction for single-particle dissipative particle dynamics model

J. Ouyang, Yanggui Li, Yi Wang, 2018, Microfluidics and Nanofluidics.

Phase field modeling of the ring-banded spherulites of crystalline polymers: The role of thermal diffusion

J. Ouyang, Xiaodong Wang, Wen Zhou, 2014 .

MULTISCALE MODELING AND SIMULATION OF POLYMER CRYSTALLIZATION IN COOLING STAGE: MULTISCALE MODELING AND SIMULATION OF POLYMER CRYSTALLIZATION IN COOLING STAGE

J. Ouyang, Chunlei Ruan, 2010 .

Controlled release of entrapped nanoparticles from thermoresponsive hydrogels with tunable network characteristics.

G. Karniadakis, Zhen Li, J. Ouyang, 2020, Soft matter.

Simulation of Gas-Solid Flow in Vertical Pipe by Hard-Sphere Model

Aibing Yu, Renhu Pan, R. Pan, 2005 .

A Phase Field Technique for Modeling and Predicting Flow Induced Crystallization Morphology of Semi-Crystalline Polymers

Jie Ouyang, Xiaodong Wang, Zhijun Liu, 2016, Polymers.

Numerical Simulation of Melt Filling and Gas Penetration in Gas Assisted Injection Molding

J. Ouyang, Xiaoyang Xu, Qiang Li, 2011 .

A drag force formula for heterogeneous granular flow systems based on finite average statistical method

J. Ouyang, Xiaodong Wang, Xin Li, 2020 .

A stable discontinuous Galerkin method based on high‐order dual splitting scheme without additional stabilization term for incompressible flows

J. Ouyang, Xiaodong Wang, Mengxia Ma, 2021, International Journal for Numerical Methods in Fluids.

A coupled continuous and discontinuous finite element method for the incompressible flows

P. Dai, J. Ouyang, Puyang Gao, 2017 .

J. Ouyang, Xiaodong Wang, 2012 .

Active learning of constitutive relation from mesoscopic dynamics for macroscopic modeling of non-Newtonian flows

Jie Ouyang, Lifei Zhao, George E. Karniadakis, 2017, J. Comput. Phys..

Finite volume simulations of behavior for polystyrene in a cross-slot flow based on Rolie-Poly model

J. Ouyang, Wuming Li, Qingsheng Liu, 2016, Rheologica Acta.

Numerical study on fiber suspensions in non‐isothermal viscoelastic media

J. Ouyang, Hongping Zhang, Chunlei Ruan, 2013 .

Three-dimensional simulations of non-isothermal transient flow and flow-induced stresses during the viscoelastic fluid filling process

J. Ouyang, Wuming Li, Xin Zhuang, 2017 .

Numerical simulation of viscoelastic fluid flows using a robust FVM framework on triangular grid

Jie Ouyang, Jin Su, Binxin Yang, 2016 .

Numerical analysis of the impact of two droplets with a liquid film using an incompressible SPH method

Tao Jiang, Jie Ouyang, Tao Jiang, 2014 .

Lattice Boltzmann method for the simulation of viscoelastic fluid flows over a large range of Weissenberg numbers

Jie Ouyang, Jin Su, Xiaodong Wang, 2013 .

Modeling and Simulation of Fiber Reinforced Polymer Mold Filling Process by Level Set Method

Jie Ouyang, Binxin Yang, Chuntai Liu, 2010 .

The SPH method for simulating a viscoelastic drop impact and spreading on an inclined plate

T. Jiang, J. Ouyang, Bin-Xin Yang, 2010 .

Simulation of Stress Distribution near Weld Line in the Viscoelastic Melt Mold Filling Process

Jie Ouyang, Fang Wang, Bin-Xin Yang, 2013, J. Appl. Math..

Integration modified wavelet neural networks for solving thin plate bending problem

Jie Ouyang, Binxin Yang, Xuejuan Li, 2013 .

Integration Wavelet Neural Network for Steady Convection Dominated Diffusion Problem

Jie Ouyang, Jinlian Ren, Xuejuan Li, 2010, 2010 Third International Conference on Information and Computing.

A mixed corrected symmetric SPH (MC-SSPH) method for computational dynamic problems

Jie Ouyang, Tao Jiang, Jin-Lian Ren, 2012, Comput. Phys. Commun..

Simulation of container filling process with two inlets by improved smoothed particle hydrodynamics (SPH) method

Jie Ouyang, Binxin Yang, Jinlian Ren, 2011 .

SPH simulations of three-dimensional non-Newtonian free surface flows

Jie Ouyang, Xiaoyang Xu, Binxin Yang, 2013 .

On a two-level element-free Galerkin method for incompressible fluid flow

Xiaohua Zhang, J. Ouyang, Lin Zhang, 2009 .

Simulation of crystallization kinetics and morphology during nonisothermal crystallization in short fiber reinforced composites

J. Ouyang, Chunlei Ruan, 2012 .

The variational multiscale element free Galerkin method for MHD flows at high Hartmann numbers

Jie Ouyang, Xiaohua Zhang, Lin Zhang, 2013, Comput. Phys. Commun..

Variational multiscale element free Galerkin method for the water wave problems

Jie Ouyang, Tao Jiang, Lin Zhang, 2011, J. Comput. Phys..

The characteristic‐based split (CBS) meshfree method for free surface flow problems in ALE formulation

J. Ouyang, Lin Zhang, Xiao Hua Zhang, 2011 .

Variational multiscale element-free Galerkin method for 2D Burgers' equation

Xiaoxia Wang, Jie Ouyang, Xiaohua Zhang, 2010, J. Comput. Phys..

Characteristic based split (CBS) meshfree method modeling for viscoelastic flow

Xiaohua Zhang, J. Ouyang, Lin Zhang, 2010 .

Matrix free meshless method for transient heat conduction problems

Xiaohua Zhang, J. Ouyang, Lin Zhang, 2009 .

Element-free characteristic Galerkin method for Burgers equation.

Jie Ouyang, Xiaohua Zhang, Xiaohua Zhang, 2009 .

On a multi-scale element-free Galerkin method for the Stokes problem

Jie Ouyang, Wenbin Zhang, Xiaohua Zhang, 2008, Appl. Math. Comput..

The two-level element free Galerkin method for MHD flow at high Hartmann numbers

Jie Ouyang, Xiaohua Zhang, Xiaohua Zhang, 2008 .

Meshless analysis of heat transfer due to viscous dissipation in polymer flow

Xiao-hua Zhang, J. Ouyang, 2008 .

Particle-motion-resolved discrete model for simulating gas–solid fluidization

Jinghai Li, Jie Ouyang, Jinghai Li, 1999 .

Development of a finite element/discontinuous Galerkin/level set approach for the simulation of incompressible two phase flow

Jie Ouyang, Wen Zhou, Puyang Gao, 2018, Adv. Eng. Softw..

A meshfree collocation method based on moving Taylor polynomial approximation for high order partial differential equations

J. Ouyang, Xiaodong Wang, Ying Liu, 2020 .

Local Kronecker delta property of the MLS approximation and feasibility of directly imposing the essential boundary conditions for the EFG method

J. Ouyang, Xiaodong Wang, Zhaohui Feng, 2013 .

An improved particle method for simulation of the non-isothermal viscoelastic fluid mold filling process

T. Jiang, J. Ouyang, J. Ren, 2015 .

Investigating the role of oriented nucleus in polymer shish-kebab crystal growth via phase-field method.

J. Ouyang, Xiaodong Wang, Wen Zhou, 2014, The Journal of chemical physics.

Analysis of the Energy Stability for Stabilized Semi-implicit Schemes of the Functionalized Cahn-Hilliard Mass-conserving Gradient Flow Equation

Jie Ouyang, Mengxia Ma, Yong Chai, 2021, J. Sci. Comput..

Numerical comparison of modified-energy stable SAV-type schemes and classical BDF methods on benchmark problems for the functionalized Cahn-Hilliard equation

Steven M. Wise, Jie Ouyang, Chenhui Zhang, 2020, J. Comput. Phys..

Unconditionally energy stable second-order numerical schemes for the Functionalized Cahn-Hilliard gradient flow equation based on the SAV approach

Jie Ouyang, Chenhui Zhang, J. Ouyang, 2021, Comput. Math. Appl..

Highly accurate, linear, and unconditionally energy stable large time-stepping schemes for the Functionalized Cahn-Hilliard gradient flow equation

Jie Ouyang, Chenhui Zhang, Xiaodong Wang, 2021, J. Comput. Appl. Math..

A Lattice Boltzmann Method and Asynchronous Model Coupling for Viscoelastic Fluids

Jie Ouyang, Jin Su, Junxiang Lu, 2018 .

Lattice Boltzmann model for the volume-averaged Navier-Stokes equations

Jie Ouyang, J. Ouyang, Jinfeng Zhang, 2014, 1406.6438.

Simulation of Polymer Crystallization under Isothermal and Temperature Gradient Conditions Using Particle Level Set Method

J. Ouyang, Qingsheng Liu, Zhijun Liu, 2016 .

Numerical simulation of flow-induced stresses in mold filling process using a three-dimensional two-phase flow model

J. Ouyang, Wen Zhou, Bin-Xin Yang, 2016 .

An adaptive method to capture weldlines during the injection mold filling

Zhifeng Zhao, Ling Zhang, Jie Ouyang, 2012, Comput. Math. Appl..

Numerical simulation of gas-assisted injection molding using CLSVOF method

Qiang Li, Jie Ouyang, Binxin Yang, 2012 .

Simulation of polymer molding filling process with an adaptive weld line capturing algorithm

Jie Ouyang, Binxin Yang, Supei Zheng, 2012 .

Simulation of Non-isothermal Injection Molding for a Non-Newtonian Fluid by Level Set Method

Qiang Li, Jie Ouyang, Binxin Yang, 2010 .

Coarse graining of the fully atomic methane models to monatomic isotropic models using relative entropy minimization

J. Ouyang, Wuming Li, Qingsheng Liu, 2017 .

Studying the viscosity of methane fluid for different resolution levels models using Poiseuille flow in a nano-channel

J. Ouyang, Wuming Li, Qingsheng Liu, 2016 .

Discrete simulations of heterogeneous structure and dynamic behavior in gas-solid fluidization

Jinghai Li, Jie Ouyang, Jinghai Li, 1999 .

Numerical Simulation of the Non-isothermal Viscoelastic Flow Past a Confined Cylinder

J. Ouyang, Chunlei Ruan, 2010 .

Multi-scale mathematic modeling of non-isothermal polymeric flow of fiber suspensions

Ling Zhang, Jie Ouyang, Hongping Zhang, 2008, Comput. Chem. Eng..

Direct calculation of voidage in the fine-grid CFD–DEM simulation of fluidized beds with large particles

Jie Ouyang, Chuntao Jiang, J. Ouyang, 2018, Particuology.

Appropriate stabilized Galerkin approaches for solving two-dimensional coupled Burgers' equations at high Reynolds numbers

Jie Ouyang, Yong Chai, J. Ouyang, 2020, Comput. Math. Appl..

Machine learning of lubrication correction based on GPR for the coupled DPD-DEM simulation of colloidal suspensions.

J. Ouyang, Xiaodong Wang, Yi Wang, 2021, Soft matter.

Dissipative particle dynamics simulation for the density currents of polymer fluids

Xingguo Geng, J. Ouyang, Qingsheng Liu, 2016 .

A hybrid multiscale dissipative particle dynamics method coupling particle and continuum for complex fluid

Jie Ouyang, Yanggui Li, D. Zang, 2015 .

Multi-scale modeling and simulation of crystallization during cooling in short fiber reinforced composites

Jie Ouyang, Shuaiqiang Liu, Chunlei Ruan, 2012 .

Computer modeling of isothermal crystallization in short fiber reinforced composites

Jie Ouyang, Shuaiqiang Liu, Lin Zhang, 2011, Comput. Chem. Eng..

A Dynamic Coarse Grain Discrete Element Method for Gas-Solid Fluidized Beds by Considering Particle-Group Crushing and Polymerization

Kaicheng Chen, J. Ouyang, Xiaodong Wang, 2020, Applied Sciences.

Use of compromise-based local porosities for coarse grid DEM simulation of bubbling fluidized bed with large particles

Jie Ouyang, Binxin Yang, J. Ouyang, 2013 .

Transport properties and structure of dense methane fluid in the rough nano-channels using non-equilibrium multiscale molecular dynamics simulation

J. Ouyang, Xiaodong Wang, Qingsheng Liu, 2017 .

The simpler GMRES method combined with finite volume method for simulating viscoelastic flows on triangular grid

Jie Ouyang, Lifei Zhao, Wen Zhou, 2015, Adv. Eng. Softw..

Revised drag calculation method for coarse grid Lagrangian–Eulerian simulation of gas–solid bubbling fluidized bed

Jie Ouyang, Qiang Li, J. Ouyang, 2013 .

Riser simulation and radial porosity distribution characterization for gas-fluidized bed of cork particles

Qiang Li, J. Ouyang, Guorong Wu, 2014 .

The coupling of element-free Galerkin method and molecular dynamics for the incompressible flow problems

Xiaohua Zhang, J. Ouyang, Lin Zhang, 2011 .