D. Deganello

发表

Level-set method for the modelling of liquid bridge formation and break-up

T. N. Croft, D. Gethin, T. Claypole, 2011 .

Short-Term Intra-Subject Variation in Exhaled Volatile Organic Compounds (VOCs) in COPD Patients and Healthy Controls and Its Effect on Disease Classification

T. Claypole, D. Deganello, C. Phillips, 2014, Metabolites.

Impact of metered ink volume on reel-to-reel flexographic printed conductive networks for enhanced thin film conductivity

D. Gethin, T. Claypole, D. Deganello, 2012 .

Patterning of micro-scale conductive networks using reel-to-reel flexographic printing

D. Gethin, T. Claypole, D. Deganello, 2010 .

Direct patterning of gold nanoparticles using flexographic printing for biosensing applications

D. Deganello, K. Teng, J. Benson, 2015, Nanoscale Research Letters.

Nanotextured Surface on Flexographic Printed ZnO Thin Films for Low-Cost Non-Faradaic Biosensors.

Abdulaziz K. Assaifan, R. Stanton, D. Deganello, 2016, ACS applied materials & interfaces.

Validation of Optimal Fourier Rheometry for rapidly gelling materials and its application in the study of collagen gelation

M. R. Brown, P. R. Williams, D. Curtis, 2015 .

Control of morphological and electrical properties of flexographic printed electronics through tailored ink rheology

D. Curtis, D. Deganello, Miles L. Morgan, 2019, Organic Electronics.

Formulation, characterisation and flexographic printing of novel Boger fluids to assess the effects of ink elasticity on print uniformity

D. Curtis, D. Deganello, A. Holder, 2017, Rheologica Acta.

Non-contact assessment of electrical performance for rapidly sintered nanoparticle silver coatings through colorimetry

D. Gethin, T. Claypole, D. Worsley, 2012 .

Flexographic printing of graphene nanoplatelet ink to replace platinum as counter electrode catalyst in flexible dye sensitised solar cell

David T. Gethin, Jenny Baker, Trystan Watson, 2014 .

Optically transparent graphene nanoplatelet inks as low cost electrocatalysts for liquid dye sensitised solar cells

D. Gethin, T. Watson, T. Claypole, 2014 .

Assessment of the stress relaxation characteristics of critical gels formed under unidirectional shear flow by controlled stress parallel superposition rheometry

M. R. Brown, P. R. Williams, D. Curtis, 2015 .

Improvement in liquid absorption of open‐cell polymeric foam by plasma treatment for food packaging applications

J. McGettrick, D. Deganello, Alaa Alaizoki, 2021, Journal of Applied Polymer Science.

Vertically aligned graphene prepared by photonic annealing for ultra-sensitive biosensor.

Wei Zhang, D. Deganello, K. Teng, 2020, ACS applied materials & interfaces.

Ultrafast near-infrared sintering of a slot-die coated nano-silver conducting ink

T. Watson, T. Claypole, D. Worsley, 2011 .

Glassy carbon manufacture using rapid photonic curing

J. McGettrick, D. Deganello, Y. C. Lau, 2022, Journal of Materials Science.

Three-dimensional biofabrication of an aragonite-enriched self-hardening bone graft substitute and assessment of its osteogenicity in vitro and in vivo

C. Yan, Z. Shao, Z. Xia, 2020, Biomaterials translational.

UV photodecomposition of zinc acetate for the growth of ZnO nanowires

D. Deganello, K. Teng, C. M. Fung, 2015, Nanotechnology.

Cellulose nanofibrils and silver nanowires active coatings for the development of antibacterial packaging surfaces.

D. Gethin, J. Bras, D. Deganello, 2020, Carbohydrate polymers.

High performance tunable piezoresistive pressure sensor based on direct contact between printed graphene nanoplatelet composite layers

D. Deganello, A. Holder, T. Maffeis, 2016 .

Printing techniques for the fabrication of OLEDs

D. Deganello, 2013 .

The effect of graphite and carbon black ratios on conductive ink performance

T. Claypole, D. Deganello, Sarah-Jane Potts, 2017, Journal of Materials Science.

Spray-Coating Thin Films on Three-Dimensional Surfaces for a Semitransparent Capacitive-Touch Device

Chris E. Jones, F. Torrisi, Fred Le Moal, 2018, ACS applied materials & interfaces.

Metal organic framework sensors on flexible substrate for ammonia sensing application at room temperature

D. Gethin, J. Bras, Z. Tehrani, 2021, Journal of Materials Chemistry C.

Effect of intense pulsed light on hydrothermally grown ZnO nanowires

Abdulaziz K. Assaifan, D. Deganello, K. Teng, 2020, Materials Letters.

Flexographic printing-assisted fabrication of ZnO nanowire devices

S. Lau, D. Deganello, K. Teng, 2013, Nanotechnology.

Designing a High-Power Sodium-Ion Battery by in Situ Metal Plating

S. Margadonna, L. Malavasi, D. Deganello, 2018, ACS Applied Energy Materials.

Rheology of cellulose nanofibrils and silver nanowires for the development of screen-printed antibacterial surfaces

D. Gethin, J. Bras, D. Deganello, 2021, Journal of Materials Science.

P49 Intra-subject variation in breath profile of exhaled volatile organic compounds (eVOCs) in chronic obstructive pulmonary disease (COPD)

T. Claypole, D. Deganello, C. Phillips, 2011, Thorax.

Printed-Sensor-on-Chip devices – Aerosol jet deposition of thin film relative humidity sensors onto packaged integrated circuits

Ben Clifford, C O Phillips, D. Deganello, 2018 .

Numerical simulation of dynamic contact angle using a force based formulation

T. N. Croft, D. Gethin, T. Claypole, 2011 .

Flexographic printing of ultra-thin semiconductor polymer layers

Tim C. Claypole, C O Phillips, T. Claypole, 2016 .

Enhanced liquid retention capacity within plastic food packaging through modified capillary recesses

D. Deganello, Alaa Alaizoki, Christopher Phillips, 2022, Journal of Food Engineering.

Effect of plasma treatment on improving liquid retention capacity of capillary recesses for food packaging applications

D. Deganello, Alaa Alaizoki, Christopher Phillips, 2021, Food Packaging and Shelf Life.

Efficient calculation of fluid-induced wall shear stress within tissue engineering scaffolds by an empirical model

Z. Xia, D. Deganello, F. Zhao, 2023, Medicine in Novel Technology and Devices.

Solid-state synthesis of NASICON (Na3Zr2Si2PO12) using nanoparticle precursors for optimisation of ionic conductivity

S. Margadonna, D. Deganello, T. Dunlop, 2019, Journal of Materials Science.

Facile fabrication of electrochemical ZnO nanowire glucose biosensor using roll to roll printing technique

D. Deganello, K. Teng, C. M. Fung, 2017 .

Scalable Synthesis of Pre‐Intercalated Manganese(III/IV) Oxide Nanostructures for Supercapacitor Electrodes: Electrochemical Comparison of Birnessite and Cryptomelane Products

Daniel R. Jones, D. Deganello, S. Kiani, 2023, ChemElectroChem.

Measuring maximum tensile strength of liquids at low stressing rates

T. Claypole, D. Deganello, A. Lubansky, 2011 .