J. Wischek

发表

A STOCHASTIC RELIABILITY MODEL FOR APPLICATION IN A MULTIDISCIPLINARY OPTIMIZATION OF A LOW PRESSURE TURBINE BLADE MADE OF TITANIUM ALUMINIDE

T. Becker, S. Reh, C. Dresbach, 2016 .

Synchrotron X-Ray Diffraction Measurements Mapping Internal Strains of Thermal Barrier Coatings During Thermal Gradient Mechanical Fatigue Loading

J. Almer, Albert Manero, J. Okasinski, 2014 .

Method for conducting in situ high-temperature digital image correlation with simultaneous synchrotron measurements under thermomechanical conditions.

P. Kenesei, J. Almer, S. Raghavan, 2020, The Review of scientific instruments.

Real-time evolution of Selective Laser Melted (SLM) Inconel 718 with temperature through synchrotron X-rays

P. Kenesei, J. Almer, Albert Manero, 2017 .

Capturing the Competing Influence of Thermal and Mechanical Loads on the Strain of Turbine Blade Coatings via High Energy X-rays

J. Almer, Albert Manero, J. Okasinski, 2018, Coatings.

Strain response of thermal barrier coatings captured under extreme engine environments through synchrotron X-ray diffraction

Sanna F. Siddiqui, J. Almer, Albert Manero, 2014, Nature Communications.

Miniaturization of low cycle fatigue‐testing of single crystal superalloys at high temperature for uncoated and coated specimens

R. Vaßen, J. Wischek, C. Meid, 2019, Materialwissenschaft und Werkstofftechnik.

Piezospectroscopic evaluation and damage identification for thermal barrier coatings subjected to simulated engine environments

Albert Manero, S. Raghavan, J. Wischek, 2017 .

Monitoring Local Strain in a Thermal Barrier Coating System Under Thermal Mechanical Gas Turbine Operating Conditions

J. Almer, Albert Manero, J. Okasinski, 2015 .

Optical deformation analysis of alumina based wound highly porous CMCs

J. Wischek, S. Hackemann, 2015 .

Interpreting high temperature deformation behavior of a ceramic matrix composite via high energy x-rays and numerical simulation

Katia Artzt, P. Kenesei, J. Almer, 2016 .

Method for conducting in situ high temperature DIC with simultaneous synchrotron measurements under thermomechanical load

P. Kenesei, J. Almer, S. Raghavan, 2018 .

Synchrotron XRD Measurements of Thermal Barrier Coatings Subjected to Loads Representing Operational Conditions of Rotating Gas Turbine Blades

Sanna F. Siddiqui, J. Almer, Albert Manero, 2014 .

Correlations between microstructure and room temperature tensile behavior of a duplex TNB alloy for systematically heat treated samples

J. Wischek, K. Kelm, M. Bartsch, 2015 .

Synchrotron X-ray measurement techniques for thermal barrier coated cylindrical samples under thermal gradients.

Marion Bartsch, Albert Manero, John Okasinski, 2013, The Review of scientific instruments.

Heterogeneous local straining behavior under monotonic and cyclic loadings in a friction stir welded aluminum alloy

M. Besel, Y. Uematsu, T. Kakiuchi, 2019, International Journal of Fatigue.

Comparison of Thermal Barrier Coating Stresses via High Energy X-Rays and Piezospectroscopy

Anette M. Karlsson, Marion Bartsch, Stephen Sofronsky, 2015 .