X. Zeng

发表

Measurement of Small-Strain Modulus of Gravelly Soils Using Oedometer Equipped with Piezoelectric Sensors

X. Zeng, Tammineni, 2006 .

Endruweit, Andreas and Zeng, X. and Matveev, Mikhail Y. and Long, Andrew C. (2018) Effect of yarn cross- sectional shape on resin flow through inter-yarn gaps in textile reinforcements. Composites Part A: Applied

X. Zeng, M. Matveev, 2017 .

Modeling the anisotropy of hot plastic deformation of two-phase titanium alloys with a colony microstructure

M. Zhan, X. Jiang, X. Zeng, 2018 .

Grain morphology related microstructural developments in bulk deformation of 2219 aluminum alloy sheet at elevated temperature

M. Zhan, X. Zeng, Hongwei Li, 2019, Materials Science and Engineering: A.

The heterogeneous globularization related to crystal and geometrical orientation of two-phase titanium alloys with a colony microstructure

M. Zhan, X.Q. Jiang, X.G. Fan, 2020 .

Grain refinement in hot working of 2219 aluminium alloy: On the effect of deformation mode and loading path

M. Zhan, X. Zeng, Xiaoguang Fan, 2020 .

Effect of local strains on the texture and mechanical properties of AZ31 magnesium alloy produced by continuous variable cross-section direct extrusion (CVCDE)

Qiang Chen, G. Cao, X. Zeng, 2015 .

Investigation of microstructure characteristics of the CVCDEed AZ31 magnesium alloy

G. Cao, X. Zeng, Feng Li, 2015 .

Heterogeneous microstructure and mechanical property of thin-walled tubular part with cross inner ribs produced by flow forming

H. W. Li, M. Zhan, X. Zeng, 2020, Materials Science and Engineering: A.

Research of Fretting Fatigue Characteristics of a Fiber Metal Laminate – A Steel Single-Lap Joint

X. Zeng, X. Ping, Q. Huang, 2021, Strength of Materials.

Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures

X. Zeng, J. Raghavan, 2010 .

Effects of remanent field on an elliptical flaw and a crack in a poled piezoelectric ceramic

R. Rajapakse, X. Zeng, 2004 .

Vertical vibrations of a rigid disk embedded in a poroelastic medium

R.K.N.D. Rajapakse, R. Rajapakse, X. Zeng, 1999 .

Toughening of conducting cracks due to domain switching

R. Rajapakse, X. Zeng, 2001 .

Dynamic axial load transfer from elastic bar to poroelastic medium

R.K.N.D. Rajapakse, R. Rajapakse, X. Zeng, 1999 .

Investigation the effect of crystal orientation of nickel‐based single crystal superalloys on bending creep tests

Z. Yue, Z. Kang, X. Zeng, 2014 .

Stiffness and Damping Ratio of Rubber-Modified Asphalt Mixes: Potential Vibration Attenuation for High-Speed Railway Trackbeds

Jerry G. Rose, X. Zeng, J. Rose, 2001 .

Die filling mechanism in flow forming of thin-walled tubular parts with cross inner ribs

X.G. Fan, X. Zeng, H.R. Zhang, 2020 .

Dynamic structure - soil interaction under the action of vertical ground motion, Part II: the plane problem

A. Çakmak, X. Zeng, 1984 .

Dominant substructural vibration modes for fully-loaded spent nuclear fuel canisters

Bora Gencturk, Xiaoshu Zeng, Roger Ghanem, 2020 .

Dynamic structure - soil interaction under the action of vertical ground motion, part I: the axisymmetric problem

Ahmet S. Cakmak, X. Zeng, A. Çakmak, 1984 .

Eshelby tensor for piezoelectric inclusion and application to modeling of domain switching and evolution

R. Rajapakse, X. Zeng, 2003 .

Dynamic Response of Orthogonal 3 D Woven Carbon Composites Under Soft Impact 1

X. Zeng, P. Turner, T. Liu, 2015 .

Microstructure of AZ31 magnesium alloy produced by continuous variable cross-section direct extrusion (CVCDE)

X. Zeng, Feng Li, N. Bian, 2014 .

Displacements and stresses caused by forces acting on the lateral surfaces of a crack in infinite elastic medium

A. Çakmak, X. Zeng, 1984 .

Analysis of real contact area between an elasto-plastic rough body and an elasto-plastic flat body

Jing Chen, X. Zeng, Chenghui Gao, 2014 .