R. Gangradey

发表

Design and Development of Rogowski Coil Sensors for Eddy Currents Measurement on Toroidal Vessel

R. Babu, N. R. Prakash, K. Flora, 2013 .

Study of Solid Hydrogen Pellet Speed in a Gas Gun–Type Injector

R. Gangradey, P. Nayak, J. Mishra, 2022, Fusion Science and Technology.

Design and test bench operation results of a solid hydrogen pellet injector developed for SST-1 tokamak

R. Gangradey, P. Nayak, J. Mishra, 2019, Fusion Engineering and Design.

Monitoring and data acquisition of the high speed hydrogen pellet in SPINS

R. Gangradey, P. Nayak, J. Mishra, 2016 .

Study and characterization of potential adsorbent materials for the design of the hydrogen isotopes extraction and analysis system

R. Gangradey, D. Yadav, J. Mishra, 2021 .

Measurement of thermal conductivity of materials down to 4.5 K for development of cryosorption pumps

R. Gangradey, R. Verma, S. Kasthurirengan, 2017 .

Adsorption characteristic study of activated carbons down to 4.5 k

R. Gangradey, P. Nayak, S. Kasthurirengan, 2018 .

Design and development of a liquid nitrogen cooled test cryopump for application in steady-state superconducting Tokamak-1

R. Gangradey, S. Verma, P. Nayak, 2022, Vacuum.

CFD modelling and performance analysis of a twin screw hydrogen extruder

S. Arumugam, R. Gangradey, S. Kasthurirengan, 2019, Fusion engineering and design.

Experimental Investigation of Thermal Properties of Materials Used to Develop Cryopump

R. Gangradey, P. Nayak, J. Mishra, 2021 .

Development of CFD model for the analysis of a cryogenics twin-screw hydrogen extruder system

R. Gangradey, S. Verma, S. Mukherjee, 2020 .

Numerical Prediction of the Operating Point for the Cryogenic Twin-Screw Hydrogen Extruder System

R. Gangradey, P. R. Ravi Kumar, Senthil Kumar Arumugam, 2021, Cryogenics.

Development of Cryogenic Extrusion Techniques and Modelling of a Twin Screw Extruder: A Review

Ranjana Gangradey, Sreeja Sadasivan, Prashanth Shivanoor Ravikumar, 2021, Journal of Fusion Energy.

A Review of Pellet Injector Technology: Brief History and Recent Key Developments

R. Srinivasan, R. Gangradey, S. Verma, 2020 .

Numerical modelling of solid hydrogen flow through an extruder die

S. Arumugam, R. Gangradey, S. Prashanth, 2020, Journal of Physics: Conference Series.

SPINS-IND: Pellet injector for fuelling of magnetically confined fusion systems.

Y. Saxena, R. Gangradey, P. Nayak, 2017, The Review of scientific instruments.

Thick SS316 materials TIG welding development activities towards advanced fusion reactor vacuum vessel applications

R. Gangradey, B. Kumar, 2012 .

OGMS: A Facility to Measure Out-gassing Rate of Materials

N. R. Prakash, R. Gangradey, S. Mukherjee, 2014 .

Thermostructural Analysis of Large Cryopumping Test Facility

R. Gangradey, Vishal Gupta, P. Nayak, 2023, Fusion Science and Technology.

Activated charcoal cooled to liquid helium temperature exhibiting pumping for hydrogen and helium gases

R. Gangradey, P. Nayak, V. Tanna, 2020 .

Pumping speed offered by activated carbon at liquid helium temperatures by sorbents adhered to indigenously developed hydroformed cryopanel

R. Gangradey, P. Nayak, S. Kasthurirengan, 2015 .

Development of a control system for compression and expansion cycles of critical valve for high vacuum systems

R. Gangradey, J. Agarwal, H. Patel, 2016 .

THERMO-HYDRAULIC ANALYSIS OF FORCED FLOW HELIUM COOLED CRYOPANELS OF CRYOPUMP USING VENECIA CODE

R. Gangradey, P. Nayak, Subhadip Das, 2018 .

Quantitative measurement of outgassing and degassing rate for various materials used in cryogenic pumps

R. Gangradey, P. Nayak, J. Mishra, 2018 .

Studies of Adsorption Characteristics of Activated Carbons in between 4.5 to 10 K for Cryopump Applications

V. Krishnamoorthy, R. Gangradey, S. Kasthurirengan, 2012 .

Development of experimental setup for study of adsorption characteristics of porous materials down to 4.2 K

B. T. Kuzhiveli, A. Kumar, V. Krishnamoorthy, 2012 .

Degassing Measurement Studies Carried out for Various Forms of Activated Carbon

R. Gangradey, P. Nayak, Sapana Guru, 2014 .

Performance testing of the liquid nitrogen cooled sorption cryopump for application in SST-1 Tokamak

R. Gangradey, S. Verma, P. Nayak, 2022, Fusion Engineering and Design.

Nitrogen and water vapor pumping study on a 400 mm opening LN2 cooled sorption cryopump

R. Gangradey, P. Nayak, V. Gupta, 2020 .

Design and Analysis of liquid nitrogen cooled sorption cryopump for SST-1 Tokamak

R. Gangradey, P. Nayak, V. Tanna, 2020 .

Thermo-structural analysis of SST-1 cryopump

R. Gangradey, P. Nayak, V. Tanna, 2020 .

Study on forms of activated carbon related to application in CryosorptionCryopump

R. Gangradey, P. Nayak, J. Mishra, 2018 .

Design and indigenous development of fabrication of cryopanels for cryopump applications

Ranjana Gangradey, Swarup Udgata, Prakash Ravi, 2011, 2011 IEEE/NPSS 24th Symposium on Fusion Engineering.

Outgassing measurement of various activated carbon sorbents for application in prototype cryopump

R. Gangradey, S. Mukherjee, P. Panchal, 2018 .

Studies of Thermal Behavior on Activated Carbons for the Selection of Regeneration Scheme

R. Gangradey, P. Nayak, S. Mukherjee, 2015 .

Experience of pumping the vacuum vessel of SST-1 during the baking cycle with indigenously developed liquid nitrogen cooled sorption pump

R. Gangradey, Vishal Gupta, P. Nayak, 2023, Fusion Engineering and Design.

Hydrogen outgassing and permeation in stainless steel and its reduction for UHV applications

R. Gangradey, P. Nayak, J. Mishra, 2020 .

System for adsorption isotherm studies of porous carbon materials down to 4.5 k

R. Gangradey, P. Nayak, S. Kasthurirengan, 2017 .

Design and development of LN2 cooled cryopump for application in high heat flux test facility

A. B. Desai, R. Gangradey, Vishal Gupta, 2022, Fusion Engineering and Design.