A. Hart

发表

Pseudotumors in association with well-functioning metal-on-metal hip prostheses: a case-control study using three-dimensional computed tomography and magnetic resonance imaging.

A. Liddle, D. McRobbie, J. Henckel, 2012, The Journal of bone and joint surgery. American volume.

Validation of primary metal-on-metal hip arthroplasties on the National Joint Registry for England, Wales and Northern Ireland using data from the London Implant Retrieval Centre

G. Blunn, J. Henckel, A. Hart, 2015, The bone & joint journal.

Component size mismatch of metal on metal hip arthroplasty: an avoidable never event.

A. Hart, J. Skinner, R. Whittaker, 2014, The Journal of arthroplasty.

Recommendations of protective measures for orthopedic surgeons during COVID-19 pandemic

Z. Shao, J. Henckel, M. Hirschmann, 2020, Knee Surgery, Sports Traumatology, Arthroscopy.

3D-printed Patient-specific Guides for Hip Arthroplasty.

J. Henckel, A. Hart, J. Skinner, 2018, Journal of the American Academy of Orthopaedic Surgeons.

A comparison of explanted Articular Surface Replacement and Birmingham Hip Resurfacing components.

P. Cann, A. Hart, J. Skinner, 2011, The Journal of bone and joint surgery. British volume.

A review of rapid prototyped surgical guides for patient-specific total knee replacement.

R Richards, J Henckel, J. Henckel, 2012, The Journal of bone and joint surgery. British volume.

Muscle atrophy and metal-on-metal hip implants

J. Hua, A. Guppy, A. Hart, 2015, Acta orthopaedica.

Reconstruction of acetabular defects greater than Paprosky type 3B: the importance of functional imaging

J. Henckel, A. Hart, A. Di Laura, 2021, BMC Musculoskeletal Disorders.

Surveillance of Patients with Metal-on-Metal Hip Resurfacing and Total Hip Prostheses: A Prospective Cohort Study to Investigate the Relationship Between Blood Metal Ion Levels and Implant Failure.

J. Powell, A. Eskelinen, A. Hart, 2014, The Journal of bone and joint surgery. American volume.

Insufficient Acetabular Version Increases Blood Metal Ion Levels after Metal-on-metal Hip Resurfacing

J. Henckel, A. Hart, J. Skinner, 2011, Clinical orthopaedics and related research.

The effect of frictional torque and bending moment on corrosion at the taper interface : an in vitro study.

F. Haddad, G. Blunn, A. Hart, 2015, The bone & joint journal.

Effect of impact assembly on the interface deformation and fretting corrosion of modular hip tapers: An in vitro study

Timothy J. Cobb, F. Haddad, G. Blunn, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Prevalence of abnormal findings in 230 knees of asymptomatic adults using 3.0 T MRI

J. Henckel, A. Hart, A. Fotiadou, 2020, Skeletal Radiology.

Circulating levels of cobalt and chromium from metal-on-metal hip replacement are associated with CD8+ T-cell lymphopenia.

E. Kulinskaya, J. Powell, A. Hart, 2009, The Journal of bone and joint surgery. British volume.

Automated measurement of fat infiltration in the hip abductors from Dixon magnetic resonance imaging.

J. Henckel, A. Hart, A. Fotiadou, 2020, Magnetic resonance imaging.

Retrieval analysis of contemporary antioxidant polyethylene: multiple material and design changes may decrease implant performance

J. Henckel, M. Hirschmann, A. Eskelinen, 2019, Knee Surgery, Sports Traumatology, Arthroscopy.

The role of the patellar tendon angle and patellar flexion angle in the interpretation of sagittal plane kinematics of the knee after knee arthroplasty: A modelling analysis.

D. Murray, H. Pandit, A. Hart, 2018, The Knee.

Retrieval analysis of 240 metal-on-metal hip components, comparing modular total hip replacement with hip resurfacing.

P. Cann, A. Hart, J. Skinner, 2011, The Journal of bone and joint surgery. British volume.

Uncemented femoral stem orientation and position in total hip arthroplasty: A CT study

J. Henckel, A. Hart, M. Belzunce, 2020, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Assessment of the equivalence of a generic to a branded femoral stem

P. Shearing, J. Henckel, A. Hart, 2017, The Bone & Joint Journal.

Comparative analysis of current 3D printed acetabular titanium implants

P. Shearing, J. Henckel, A. Hart, 2019, 3D Printing in Medicine.

Is the immediate effect of marathon running on novice runners’ knee joints sustained within 6 months after the run? A follow-up 3.0 T MRI study

J. Henckel, A. Hart, A. Fotiadou, 2020, Skeletal Radiology.

Assessment of osteoarthritis after reconstruction of the anterior cruciate ligament: a study using single-photon emission computed tomography at ten years.

G. Dowd, J. Buscombe, A. Hart, 2005, The Journal of bone and joint surgery. British volume.

Automated postoperative muscle assessment of hip arthroplasty patients using multimodal imaging joint segmentation

Sébastien Ourselin, Tom Vercauteren, Johann Henckel, 2020, Comput. Methods Programs Biomed..

Teaching basic trauma: validating FluoroSim, a digital fluoroscopic simulator for guide-wire insertion in hip surgery

A. Hart, B. V. van Duren, K. Sugand, 2018, Acta orthopaedica.

Training and Transfer Effect of FluoroSim, an Augmented Reality Fluoroscopic Simulator for Dynamic Hip Screw Guidewire Insertion: A Single-Blinded Randomized Controlled Trial.

A. Hart, B. V. van Duren, K. Sugand, 2019, The Journal of bone and joint surgery. American volume.

Understanding the reactivity of CoCrMo-implant wear particles

M. Toney, J. Weker, M. Ryan, 2018, npj Materials Degradation.

Importance of the HIF pathway in cobalt nanoparticle-induced cytotoxicity and inflammation in human macrophages

T. Tetley, A. Hart, A. Nyga, 2015, Nanotoxicology.

Molecular analysis of HIF activation as a potential biomarker for adverse reaction to metal debris (ARMD) in tissue and blood samples.

T. Tetley, A. Hart, A. Nyga, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Detection of incorrect manufacturer labelling of hip components

J. Henckel, A. Hart, J. Skinner, 2016, Skeletal Radiology.

Decrease in Local Volumetric Bone Mineral Density in Osteoarthritic Joints Is Associated with the Increase in Cartilage Damage: A Peripheral Quantitative CT Study

J. Henckel, Chaozong Liu, A. Hart, 2017, Front. Mater..

Assessing for Cardiotoxicity from Metal-on-Metal Hip Implants with Advanced Multimodality Imaging Techniques

P. Kellman, J. Moon, C. Manisty, 2017, The Journal of bone and joint surgery. American volume.

Detection of metallic cobalt and chromium liver deposition following failed hip replacement using T2* and R2 magnetic resonance

P. Kellman, J. Moon, C. Manisty, 2016, Journal of Cardiovascular Magnetic Resonance.

The treatment of unstable, extracapsular hip fractures with the AO/ASIF proximal femoral nail (PFN)--our first 60 cases.

A. Hart, H. Banan, A. Al-Sabti, 2002, Injury.

Calculating the hip center of rotation using contralateral pelvic anatomy

J. Hua, J. Henckel, A. Hart, 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Three-dimensional pre-operative planning of primary hip arthroplasty: a systematic literature review

J. Henckel, A. Hart, H. Hothi, 2020, EFORT open reviews.

2D measurements of cup orientation are less reliable than 3D measurements (Acta Orthop 2015; 86 (4): 485–90.)

J. Cobb, A. Hart, K. Davda, 2016, Acta orthopaedica.

Predicting wear and blood metal ion levels in metal‐on‐metal hip resurfacing

P. Noble, J. Henckel, A. Hart, 2014, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Native Acetabular Version: 3D CT Analysis of the Psoas Valley

J. Henckel, J. Cobb, A. Hart, 2013, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Understanding why metal-on-metal hip arthroplasties fail: a comparison between patients with well-functioning and revised birmingham hip resurfacing arthroplasties. AAOS exhibit selection.

P. Noble, J. Henckel, A. Hart, 2012, Journal of Bone and Joint Surgery. American volume.

Cup Inclination Angle of Greater than 50 Degrees Increases whole Blood Concentrations of Cobalt and Chromium ions after Metal-on-metal Hip Resurfacing

J. Powell, A. Hart, J. Skinner, 2008 .

Cup inclination angle of greater than 50 degrees increases whole blood concentrations of cobalt and chromium ions after metal-on-metal hip resurfacing.

J. Powell, A. Hart, J. Skinner, 2008, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Osseointegration of retrieved 3D-printed, off-the-shelf acetabular implants

J. Henckel, A. Eskelinen, R. Tirabosco, 2021, Bone & joint research.

The effect of metal ions in solution on bacterial growth compared with wear particles from hip replacements.

A. Hart, C. Aldam, H. Anwar, 2007, The Journal of bone and joint surgery. British volume.

Retrieval Findings of Recalled Dual-Taper Hips

J. Henckel, Young-Min Kwon, A. Hart, 2018, The Journal of bone and joint surgery. American volume.

Can 3D surgical planning and patient specific instrumentation reduce hip implant inventory? A prospective study

J. Henckel, A. Hart, H. Hothi, 2020, 3D Printing in Medicine.

COVID-19 coronavirus: recommended personal protective equipment for the orthopaedic and trauma surgeon

J. Henckel, M. Hirschmann, C. Mouton, 2020, Knee Surgery, Sports Traumatology, Arthroscopy.

Enhanced wear and corrosion in modular tapers in total hip replacement is associated with the contact area and surface topography

J. Hua, G. Blunn, A. Hart, 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Modular neck femoral stems.

G. Blunn, A. Hart, J. Skinner, 2013, The bone & joint journal.

Simple isolation method for the bulk isolation of wear particles from metal on metal bearing surfaces generated in a hip simulator test

J. Shelton, A. Hart, J. Housden, 2012, Journal of Materials Science: Materials in Medicine.

A Retrieval Analysis of Explanted Durom Metal-On-Metal Hip Arthroplasties

J. Henckel, A. Hart, J. Skinner, 2011, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Blood and plasma titanium levels associated with well-functioning hip implants.

J. Henckel, A. Hart, H. Apthorp, 2019, Journal of trace elements in medicine and biology : organ of the Society for Minerals and Trace Elements.

601 metal-on-metal total hip replacements with 36 mm heads a 5 minimum year follow up: Levels of ARMD remain low despite a comprehensive screening program.

A. Hart, N. Hussain, A. Atrey, 2017, Journal of orthopaedics.

Pseudotumors Are Common in Well-positioned Low-wearing Metal-on-Metal Hips

Johann Henckel, John A Skinner, Alister J Hart, 2012, Clinical Orthopaedics and Related Research.

Partial Resurfacing of the Knee with the BioPoly Implant

V. Bobić, A. Hart, J. Miles, 2017, JB & JS open access.

A retrieval analysis of the Precice intramedullary limb lengthening system

J. Henckel, A. Hart, J. Skinner, 2018, Bone & joint research.

Assessment of material loss of retrieved magnetically controlled implants for limb lengthening

J. Henckel, A. Hart, H. Hothi, 2018, Proceedings of the Institution of mechanical engineers. Part H, journal of engineering in medicine.

Frequent Femoral Neck Osteolysis With Birmingham Mid-head Resection Resurfacing Arthroplasty in Young Patients

A. Hart, S. Muirhead-Allwood, J. Black, 2015, Clinical orthopaedics and related research.

Edge loading in metal-on-metal hips: low clearance is a new risk factor

Philippa Cann, Alister Hart, Angelos Zografos, 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Metal-on-metal bearings: the evidence so far.

F. Haddad, H. Gill, D. Murray, 2011, The Journal of bone and joint surgery. British volume.

Higher Blood Cobalt and Chromium Levels in Patients With Unilateral Metal-on-Metal Total Hip Arthroplasties Compared to Hip Resurfacings.

A. Eskelinen, H. Huhtala, T. Moilanen, 2016, The Journal of arthroplasty.

Metal-on-Metal Bearings in Hip Surgery: The London Implant Retrieval Centre Experience

A. Hart, J. Skinner, A. Matthies, 2012 .

Wear of dual-mobility cups: a review article

J. Henckel, A. Hart, J. Skinner, 2017, International Orthopaedics.

Chemical speciation of nanoparticles surrounding metal-on-metal hips.

J. Perkins, D. McComb, M. Ryan, 2012, Chemical communications.

Synchrotron analysis of human organ tissue exposed to implant material.

J. Henckel, A. Hart, R. Trousdale, 2018, Journal of trace elements in medicine and biology : organ of the Society for Minerals and Trace Elements.

The Chemical Form of Metal Species Released from Corroded Taper Junctions of Hip Implants: Synchrotron Analysis of Patient Tissue

J. Henckel, J. Powell, P. Quinn, 2017, Scientific Reports.

The chemical form of metallic debris in tissues surrounding metal-on-metal hips with unexplained failure.

J. Powell, P. Quinn, A. Hart, 2010, Acta biomaterialia.

Microfocus study of metal distribution and speciation in tissue extracted from revised metal on metal hip implants

J. Powell, J. Mosselmans, P. Quinn, 2009 .

Changes in blood ion levels after removal of metal-on-metal hip replacements

A. Liddle, P. Noble, Salim K Durrani, 2014, Acta orthopaedica.

Retrieval analysis of ceramic-coated metal-on-polyethylene total hip replacements

D. Kendoff, T. Gehrke, D. D. Villiers, 2017, International Orthopaedics.

Lessons from retrievals: Retrievals help understand the reason for revision of coated hip arthroplasties

G. Blunn, A. Hart, J. Skinner, 2015, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Clinical Usefulness of SPECT-CT in Patients with an Unexplained Pain in Metal on Metal (MOM) Total Hip Arthroplasty.

J. Hua, J. Henckel, S. Wan, 2015, The Journal of arthroplasty.

The effect of metal artefact on the design of custom 3D printed acetabular implants

J. Henckel, A. Hart, H. Hothi, 2020, 3D Printing in Medicine.

The painful metal-on-metal hip resurfacing.

J. Henckel, J. Cobb, A. Hart, 2009, The Journal of bone and joint surgery. British volume.

Analysis of the Attune tibial tray backside

J. Lewis, J. Henckel, M. Hirschmann, 2019, Bone & joint research.

Can custom 3D printed implants successfully reconstruct massive acetabular defects? A 3D‐CT assessment

J. Henckel, A. Hart, A. Di Laura, 2020, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The Chemical Form of Metal Species Released from Corroded Taper Junctions of Hip Implants: Synchrotron Analysis of Patient Tissue

J. Henckel, J. Powell, P. Quinn, 2017, Scientific Reports.

The association between metal ions from hip resurfacing and reduced T-cell counts.

A. Goodship, J. Powell, A. Hart, 2006, The Journal of bone and joint surgery. British volume.

Host-specific factors affect the pathogenesis of adverse reaction to metal debris

J. Henckel, A. Eskelinen, A. Hart, 2019, BMC Musculoskeletal Disorders.

Analysis of bearing wear, whole blood and synovial fluid metal ion concentrations and histopathological findings in patients with failed ASR hip resurfacings

J. Henckel, A. Eskelinen, A. Hart, 2017, BMC Musculoskeletal Disorders.

International metal-on-metal multidisciplinary teams: do we manage patients with metal-on-metal hip arthroplasty in the same way? An analysis from the International Specialist Centre Collaboration on MOM Hips (ISCCoMH).

D. Kendoff, A. Eskelinen, A. Hart, 2016, The bone & joint journal.

Revision of metal-on-metal hip arthroplasty in a tertiary center

A. Liddle, J. Henckel, A. Hart, 2013, Acta orthopaedica.

Management of metal-on-metal hip implant patients: Who, when and how to revise?

A. Hart, J. Skinner, R. Berber, 2016, World journal of orthopedics.

Cross-sectional imaging of metal-on-metal hip arthroplasties

Johann Henckel, Alister Hart, J. Henckel, 2014, Acta orthopaedica.

A comparison of the diagnostic accuracy of MARS MRI and ultrasound of the painful metal-on-metal hip arthroplasty

Johann Henckel, John A Skinner, Alister J Hart, 2014, Acta orthopaedica.

Understanding Why Dual-Taper Hips Fail

Gordon W. Blunn, Johann Henckel, Paul J. Bills, 2016 .

Can we substitute MARS MRI with CT

J. Henckel, A. Hart, K. Satchithananda, 2014 .

Magnetic resonance imaging findings in painful metal-on-metal hips: a prospective study.

Johann Henckel, Ann Sandison, John A Skinner, 2011, The Journal of arthroplasty.

Clinical significance of corrosion of cemented femoral stems in metal-on-metal hips: a retrieval study

A. Hart, J. Skinner, R. Whittaker, 2016, International Orthopaedics.

Which factors determine the wear rate of large-diameter metal-on-metal hip replacements? Multivariate analysis of two hundred and seventy-six components.

M. Porter, J. Cobb, P. Cann, 2013, The Journal of bone and joint surgery. American volume.

An analysis of metal ion levels in the joint fluid of symptomatic patients with metal-on-metal hip replacements.

A. Hart, J. Skinner, B. Sampson, 2011, The Journal of bone and joint surgery. British volume.

Blood titanium level as a biomarker of orthopaedic implant wear.

A. Hart, I. Swiatkowska, Nicholas G Martin, 2019, Journal of trace elements in medicine and biology : organ of the Society for Minerals and Trace Elements.

The Palmar Locking Compression Plate is Biomechanically Comparable to the Dorsal PI Plate for Dorsally Comminuted, Intraarticular Wrist Fractures

A. Amis, U. Hansen, A. Hart, 2007 .

Accurate determination of material loss at the taper interface of retrieved metal-on-metal hip replacements

L. Blunt, A. Hart, J. Skinner, 2013 .

The relationship between the angle of version and rate of wear of retrieved metal-on-metal resurfacings: a prospective, CT-based study.

J. Henckel, J. Cobb, P. Cann, 2011, The Journal of bone and joint surgery. British volume.

Azzopardi phenomenon in cystic pseudotumours associated with retrieved metal-on-metal arthroplasty.

A. Hart, J. Skinner, J. Zustin, 2016, Human pathology.

Clinical usefulness of blood metal measurements to assess the failure of metal-on-metal hip implants

Alister Hart, Barry Sampson, A. Hart, 2012, Annals of clinical biochemistry.

Lessons Learnt from Metal-On-Metal Hip Arthroplasties will Lead to Safer Innovation for all Medical Devices

J. Henckel, A. Hart, S. Sabah, 2015, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Quantifying the contribution of pincer deformity to femoro-acetabular impingement using 3D computerised tomography

J. Cobb, F. Iranpour, W. Dandachli, 2012, Skeletal Radiology.

[MRI investigations in patients with problems due to metal-on-metal implants].

A. Hart, E. Robinson, T. Parsons, 2013, Der Orthopade.

The risk of cardiac failure following metal-on-metal hip arthroplasty

N. Chaturvedi, J. Moon, C. Manisty, 2018, The bone & joint journal.

The palmar locking compression plate is biomechanically comparable to the dorsal pi plate for dorsally comminuted, intraarticular wrist fractures.

A. Amis, U. Hansen, A. Hart, 2007, Journal of Hand Surgery (European Volume).

Arthroscopic removal of loose bodies - a useful technique.

A. Hart, J. Skinner, S. Krishnan, 2006, Annals of the Royal College of Surgeons of England.

Computed tomography scanogram compared to long leg radiograph for determining axial knee alignment

J. Henckel, J. Cobb, A. Hart, 2015, Acta orthopaedica.

Registry Data-Valuable Lessons But Beware the Confounders.

L. Smeeth, J. Stammers, A. Hart, 2017, Journal of Arthroplasty.

Are all metal-on-metal hip revision operations contributing to the National Joint Registry implant survival curves?

J. Henckel, A. Hart, S. Sabah, 2016, The bone & joint journal.

Influence of stem type on material loss at the metal-on-metal pinnacle taper junction

G. Blunn, A. Hart, J. Skinner, 2015, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Self-Reported Neurotoxic Symptoms in Hip Arthroplasty Patients With Highly Elevated Blood Cobalt: A Case-Control Study

J. Henckel, A. Hart, S. Sabah, 2020, Journal of patient safety.

Why large-head metal-on-metal hip replacements are painful: the anatomical basis of psoas impingement on the femoral head-neck junction.

S. Harris, J. Cobb, A. Hart, 2011, The Journal of bone and joint surgery. British volume.

Understanding the implant performance of magnetically controlled growing spine rods: a review article

J. Henckel, A. Hart, H. Hothi, 2021, European spine journal.

Mechanical wear analysis helps understand a mechanism of failure in retrieved magnetically controlled growing rods: a retrieval study

J. Henckel, A. Hart, H. Hothi, 2020, BMC Musculoskeletal Disorders.

Analysing a mechanism of failure in retrieved magnetically controlled spinal rods

J. Leong, J. Henckel, A. Hart, 2017, European Spine Journal.

Damage Patterns at the Head-Stem Taper Junction Helps Understand the Mechanisms of Material Loss.

A. Hart, J. Skinner, R. Whittaker, 2017, The Journal of arthroplasty.

The reliability of a scoring system for corrosion and fretting, and its relationship to material loss of tapered, modular junctions of retrieved hip implants.

A. Hart, J. Skinner, R. Whittaker, 2014, The Journal of arthroplasty.

Management of patients with magnetically controlled growth rods amidst the global COVID-19 pandemic

J. Henckel, A. Hart, J. Skinner, 2020, European spine journal.

CORROSION AT THE HEAD-TRUNNION TAPER INTERFACE IN LARGE DIAMETER HEAD METAL-ON-METAL TOTAL HIP ARTHROPLASTY: A COMPARISON OF FIVE MANUFACTURERS

A. Hart, J. Skinner, A. Hexter, 2013 .

Inflammatory cell-induced corrosion in total knee arthroplasty: A retrieval study.

J. Henckel, A. Hart, J. Skinner, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Clinical relevance of corrosion patterns attributed to inflammatory cell-induced corrosion: A retrieval study.

G. Blunn, A. Hart, J. Skinner, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

Quantification of the difference between 3D CT and plain radiograph for measurement of the position of medial unicompartmental knee replacements.

J. Henckel, J. Cobb, A. Hart, 2011, The Knee.

3.0 T MRI findings of 104 hips of asymptomatic adults: from non-runners to ultra-distance runners

J. Henckel, A. Hart, A. Fotiadou, 2021, BMJ Open Sport & Exercise Medicine.

Learning how to resurface cam-type femoral heads with acceptable accuracy and precision: the role of computed tomography-based navigation.

Justin P Cobb, Alister J Hart, Wael Dandachli, 2008, The Journal of bone and joint surgery. American volume.

Characterization of dimensional, morphological and morphometric features of retrieved 3D-printed acetabular cups for hip arthroplasty

P. Shearing, J. Henckel, A. Hart, 2020, Journal of Orthopaedic Surgery and Research.

Metal-On-Metal Bearings, Inflammatory Pseudotumours and Their Neurological Manifestations

A. Hart, J. Skinner, P. Harvie, 2012, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty

Liam Blunt, Xiang Jiang, Paul J. Bills, 2012 .

Characterisation of wear areas on UHMWPE total knee replacement prostheses through study of their areal surface topographical parameters

L. Fleming, A. Hart, H. Hothi, 2018, Surface Topography: Metrology and Properties.

3D patient imaging and retrieval analysis help understand the clinical importance of rotation in knee replacements

J. Henckel, M. Hirschmann, A. Hart, 2018, Knee Surgery, Sports Traumatology, Arthroscopy.

Sensitivity and specificity of blood cobalt and chromium metal ions for predicting failure of metal-on-metal hip replacement.

P. Tarassoli, A. Hart, S. Sabah, 2011, The Journal of bone and joint surgery. British volume.

Combined Vascular and Orthopaedic Approach for a Pseudotumor Causing Deep Vein Thrombosis after Metal-on-Metal Hip Resurfacing Arthroplasty

Hossam Abdel-Hamid, A. Hart, J. Skinner, 2015, Case reports in orthopedics.

Cobalt and chromium measurement in patients with metal hip prostheses.

E. Diamandis, T. Moyer, A. Hart, 2013, Clinical Chemistry.

2D measurements of cup orientation are less reliable than 3D measurements

J. Cobb, A. Hart, K. Davda, 2015, Acta orthopaedica.

Computed Tomography Techniques Help Understand Wear Patterns in Retrieved Total Knee Arthroplasty.

P. Shearing, J. Henckel, M. Hirschmann, 2018, The Journal of arthroplasty.

Fracture of a ceramic component in total hip replacement.

A. Hart, J. Skinner, P. Whittingham-Jones, 2012, The Journal of bone and joint surgery. British volume.

DUAL MOBILITY VS STANDARD BEARINGS: WHAT IS THE EFFECT ON THE TAPER JUNCTION?

A. Hart, J. Skinner, R. Whittaker, 2016 .

Retrieval analysis of metal and ceramic femoral heads on a single CoCr stem design

J. Henckel, M. Liow, A. Hart, 2017, Bone & joint research.

The Relationship Between Cobalt/Chromium Ratios and the High Prevalence of Head-Stem Junction Corrosion in Metal-on-Metal Total Hip Arthroplasty.

G. Blunn, A. Hart, J. Skinner, 2016, The Journal of arthroplasty.

Corrosion of Metal Modular Cup Liners.

A. Eskelinen, A. Hart, J. Skinner, 2015, The Journal of arthroplasty.

The effect of a manufacturer recall on the threshold to revise a metal-on-metal hip

J. Henckel, A. Hart, S. Sabah, 2014, International Orthopaedics.

Clinically insignificant trunnionosis in large-diameter metal-on-polyethylene total hip arthroplasty

D. Kendoff, J. Henckel, T. Gehrke, 2017, Bone & joint research.

Metal ion toxicity

A. Hart, S. Sabah, J. Skinner, 2021, Bone & joint research.

Large Ball Metal on Metal Hips Obscure Cup Angle Measurement on Plain Radiographs

J. Henckel, J. Cobb, W. Dandachli, 2009, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Cobalt from metal-on-metal hip replacements may be the clinically relevant active agent responsible for periprosthetic tissue reactions.

J. Powell, S. Donell, P. Quinn, 2012, Acta biomaterialia.

Metal-on-metal total hip arthroplasty: does increasing modularity affect clinical outcome?

A. Hart, J. Skinner, H. Hothi, 2020, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Automated multi-atlas segmentation of gluteus maximus from Dixon and T1-weighted magnetic resonance images

Johann Henckel, Alister Hart, Anastasia Fotiadou, 2020, Magnetic Resonance Materials in Physics, Biology and Medicine.

Can marathon running improve knee damage of middle-aged adults? A prospective cohort study

J. Henckel, A. Hart, A. Fotiadou, 2019, BMJ Open Sport & Exercise Medicine.

Activation of synovial fibroblasts from patients at revision of their metal-on-metal total hip arthroplasty

J. Shelton, A. Hart, Junyao Yang, 2020, Particle and fibre toxicology.

Adolescent Scoliosis 1A001: Radiographic Results of Selecting the Touched Vertebra as the Lowest Instrumented Vertebra in Lenke Type 1 (Main Thoracic) & Type 2 (Double Thoracic) Curves at a Minimum 5-year Follow-up

Kai-Ming G. Fu, Kevin L. Ingalls, Sang Gu Lee, 2017, Global Spine Journal.

Dimensional analysis of 3D-printed acetabular cups for hip arthroplasty using X-ray microcomputed tomography

P. Shearing, J. Henckel, A. Hart, 2020 .

Method for Characterization of Material Loss from Modular Head-Stem Taper Surfaces of Hip Replacement Devices

L. Blunt, A. Hart, J. Skinner, 2015 .

Factors Associated With Trunnionosis in the Metal-on-Metal Pinnacle Hip.

A. Eskelinen, T. Moilanen, A. Hart, 2017, The Journal of arthroplasty.

MECHANISM OF CORROSION IN LARGE DIAMETER HEAD METAL-ON-METAL TOTAL HIP ARTHROPLASTY: A RETIREVAL ANALYSIS OF 161 COMPONENTS

A. Hart, J. Skinner, A. Hexter, 2013 .

Trunnion design and femoral head diameter increase corrosion at the taper interface in retrieved large-diameter metal-on-metal total hip arthroplasty

G. Blunn, A. Hart, J. Skinner, 2012 .

Does modularity of metal-on-metal hip implants increase cobalt: chromium ratio?

A. Hart, J. Skinner, H. Hothi, 2019, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Effect of Bearing Type on Taper Material Loss in Hips From 1 Manufacturer.

G. Blunn, J. Henckel, A. Eskelinen, 2017, The Journal of arthroplasty.

1 Factors Associated with Trunnionosis in the Metal-on-Metal Pinnacle Hip 1 2 3

A. Eskelinen, T. Moilanen, A. Hart, 2016 .

Focus variation measurement and advanced analysis of volumetric loss at the femoral head taper interface of retrieved modular replacement hips in replica

Liam Blunt, Paul J. Bills, Radu Racasan, 2019, Journal of Physics: Conference Series.

Augmented reality fluoroscopy simulation of the guide-wire insertion in DHS surgery: A proof of concept study.

B H van Duren, K Sugand, R Wescott, 2018, Medical engineering & physics.

Detailed Inspection of Metal Implants

A. Hart, J. Skinner, R. Whittaker, 2015, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Does diametrical clearance influence the wear of Pinnacle hip implants?

J. Henckel, A. Eskelinen, A. Hart, 2020, Bone & joint research.

Method for characterization of material loss from modular head-stem taper surfaces of hip replacement devices

L. Blunt, A. Hart, J. Skinner, 2016 .

The taper junction contributes one third of the total volumetric material loss in large diameter metal-on-metal hip arthroplasties

L. Blunt, G. Blunn, A. Hart, 2013 .

The effect of using components from different manufacturers on the rate of wear and corrosion of the head-stem taper junction of metal-on-metal hip arthroplasties.

G. Blunn, A. Hart, J. Skinner, 2016, The bone & joint journal.

Analysing a mechanism of failure in retrieved magnetically controlled spinal rods

J. Leong, J. Henckel, A. Hart, 2017, European Spine Journal.

Quantifying material loss from the bearing surfaces of retrieved hip replacements: Method validation

Johann Henckel, Alister Hart, Sean Bergiers, 2020 .

Method for the location of primary wear scars from retrieved metal on metal hip replacements

J. Henckel, A. Hart, S. Sabah, 2015, BMC Musculoskeletal Disorders.

Influence of stem type on material loss at the metal-on-metal pinnacle taper junction

G. Blunn, A. Hart, J. Skinner, 2015, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A lexicon for wear of metal‐on‐metal hip prostheses

Sang-Hyun Park, John A Skinner, Pat Campbell, 2014, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.