S. Marya

发表

Machinability of titanium alloys (Ti6Al4V and Ti555.3)

P. Arrazola, A. Garay, L. M. Iriarte, 2009 .

On The Characteristics of Electromagnetic Welds Between Aluminium and other Metals and Alloys

S. Marya, M. Marya, D. Priem, 2005 .

State of the art of electromagnetic energy for welding and powder compaction

P. Manoharan, S. Marya, D. Priem, 2013, Welding in the World.

omparison of TIG welded and friction stir welded l – 4 . 5 Mg – 0 . 26 Sc alloy .

X. Sauvage, B. Huneau, S. Marya, 2018 .

Magnetic Pulse Hybrid Joining of Polymer Composites to Metals

S. Marya, G. Racineux, C. Khalil, 2021, Metals.

Additive Manufacturing Viewed from Material Science: State of the Art & Fundamentals

K. P. Karunakaran, Surendar Marya, Jean-Yves Hascoet, 2014 .

A Metallurgical Investigation of the Direct Energy Deposition Surface Repair of Ferrous Alloys

V. Singh, S. Marya, M. Marya, 2018, Journal of Materials Engineering and Performance.

Numerical Cutting Sensitivity Study of Tool-Chip Contact

Pedro J. Arrazola, F. Meslin, Surendar Marya, 2003 .

Magnetic pulse spot welding of bimetals

Surendar Marya, Prabu Manoharan, Guillaume Racineux, 2014 .

Magnetic Pulse Welding and Spot Welding with Improved Coil Efficiency—Application for Dissimilar Welding of Automotive Metal Alloys

S. Marya, G. Racineux, C. Khalil, 2020 .

Comparison of TIG welded and friction stir welded Al–4.5Mg–0.26Sc alloy

Surendar Marya, Xavier Sauvage, Bertrand Huneau, 2008 .

Interfacial microstructures and temperatures in aluminium–copper electromagnetic pulse welds

S. Marya, M. Marya, 2004 .

On the corrosion resistance of the submerged arc welded titanium in concentrated hydrochloric acid 8 N

S. Marya, F. L. Maître, A. Caprani, 1983 .

Diffusion bonding of A2017 aluminium alloy

S. Marya, M. Cailler, T. Latouche, 1990 .

Impurity Nucleation of Dislocations in Zinc

P. G. Deo, S. Marya, 1969 .

Optimizing the design of silica coating for productivity gains during the TIG welding of 304L stainless steel

B. Huneau, S. Marya, G. Rückert, 2007 .

Influence of strain rate and temperature on brittle-ductile transition of cold rolled Al - 0.26% Ti after Ga liquid absorption at 50°C

S. Marya, 1982 .

High temperature oxidation study of direct laser deposited AlXCoCrFeNi (X=0.3,0.7) high entropy alloys

S. Marya, J. Hascoet, R. Immanuel, 2019 .

Thermal Analysis of the Stress and Temperature Induced Phase Transformations in Steels

A. Ducoin, S. Marya, F. L. Maître, 1980 .

On the kinetics of α‐phase ordering in copper‐aluminium alloys

S. Marya, J. Roland, X. Quillard, 1981 .

Steel-to-Aluminum Joining by Control of Interface Microstructures - Laser-Roll Bonding and Magnetic Pulse Welding -

S. Marya, M. Marya, D. Priem, 2007 .

Microstructures at Aluminum - Copper Magnetic Pulse Weld Interfaces

S. Marya, M. Marya, D. Priem, 2003 .

Construction of physical welding windows for magnetic pulse welding of 5754 aluminum with DC04 steel

S. Marya, G. Racineux, C. Khalil, 2020, International Journal of Material Forming.

Establishing flow stress behaviour of Ti-6Al-4V alloy and development of constitutive models using Johnson-Cook method and Artificial Neural Network for quasi-static and dynamic loading

S. Marya, S. Deb, G. Racineux, 2022, Theoretical and Applied Fracture Mechanics.

Influence of the structural state on the anodic dissolution of TA6V alloy in concentrated hydrochloric acid: Handling the results to study the anodic behaviour of welded elements

F. Priem, M. Astruc, S. Marya, 1989 .

Microstructural Development and Technical Challenges in Laser Additive Manufacturing: Case Study with a 316L Industrial Part

Surendar Marya, Manuel Marya, Virendra Singh, 2015, Metallurgical and Materials Transactions B.

Exploring material flow in friction stir welding: Tool eccentricity and formation of banded structures

F. Gratecap, Guillaume Racineux, M. Girard, 2012 .

Additive Manufacturing Viewed from Material Science: State of the Art & Fundamentals

S. Marya, J. Hascoet, K. Karunakaran, 2014 .

Tolerances of joint gaps in Nd:YAG laser welded Ti-6Al-4V alloy with the addition of filler wire

P. Wanjara, J. Cuddy, A. Birur, 2011 .

Productivity Gains by Flux Bounded TIG Welding of Aluminum

S. Marya, S. Sire, 2003 .

On the Forming of Metallic Parts through Electromagnetic and Electrohydraulic Processing

S. Marya, D. Priem, G. Racineux, 2006 .

Improving arc stability during wire arc additive manufacturing of thin-walled titanium components

S. Marya, M. Amirthalingam, S. S. Choudhury, 2021 .

On the selective silica application to improve welding performance of the tungsten arc process for a plain carbon steel and for aluminium

S. Sire, S. Marya, 2002 .

Investigation on crashworthiness of ultrafine grained A356 sheets and validation of Hall-Petch relationship at high strain-rate deformation

S. Marya, S. Panigrahi, G. Racineux, 2017 .

SERRATED CHIP PREDICTION IN FINITE ELEMENT MODELING OF THE CHIP FORMATION PROCESS

Pedro J. Arrazola, D. Ugarte, Surendar Marya, 2007 .

Enhanced Weld Penetrations in GTA Welding with Activating Fluxes Case Studies: Plain Carbon & Stainless Steels, Titanium and Aluminum

S. Sire, S. Marya, G. Rückert, 2014 .

“Materials Science” Challenges in the Additive Manufacturing of Industrial Parts

S. Marya, M. Marya, J. Hascoet, 2014 .

Temporary embrittlement followed by increase in ductility after gallium penetration in cold rolled aluminium

S. Marya, G. Wyon, 1975 .

A simple methodology to define conical tool geometry and welding parameters in friction stir welding

Surendar Marya, F. Gratecap, Guillaume Racineux, 2008 .

Material Flow Stress Sensitivity Analysis in Numerical Cutting Modeling

Pedro J. Arrazola, F. Meslin, F. Le Maître, 2004 .