J. Xiang

发表

The effect of graphitized carbon on the adsorption and photocatalytic degradation of methylene blue over TiO2/C composites

Jinlu Cai, Shenghua Hu, J. Xiang, 2020, RSC Advances.

Influence of sodium silicate concentration on properties of micro arc oxidation coatings formed on AZ91HP magnesium alloys

J. Xiang, R. F. Zhang, S. F. Zhang, 2012 .

Effects of Process Parameters on Springback of High Strength 21-6-9 Tube Bending Considering Variation of Elastic Modulus

J. Xiang, Jun Fang, Ou Yang Fang, 2022, Key Engineering Materials.

Development of a thermally stable Pt catalyst by redispersion between CeO2 and Al2O3

Xin Huang, J. Xiang, L. Lan, 2021, RSC advances.

Copper-doped 3D porous coating developed on Ti-6Al-4V alloys and its in vitro long-term antibacterial ability

T. Liang, H. Pan, J. Xiang, 2020 .

Nanocrystalline anatase TiO2 prepared via a facile low temperature route

J. Xiang, Changyuan Hu, S. Duo, 2010 .

Green and rapid synthesis of porous Ag submicrocubes via Ag3PO4 templates for near-infrared surface-enhanced Raman scattering with high accessibility

Yiqiang Sun, Lifeng Hang, J. Xiang, 2020 .

Wafer-Scale Hierarchical Nanopillar Arrays Based on Au Masks and Reactive Ion Etching for Effective 3D SERS Substrate

J. Xiang, Honghua Zhang, Dandan Men, 2018, Materials.

Effect of annealing processing on microstructure and properties of Ti-6Al-4V alloy by powder injection molding

Xiangming He, X. Qu, J. Xiang, 2006 .

Microstructure, dielectric and photoluminescence properties of Tm-doped Ba0.8Sr0.2TiO3 thin films fabricated by sol–gel method

N. Wan, Tianjin Zhang, J. Xiang, 2008 .

2D Au Nanosphere Arrays/PVA-PBA-Modified-Hydrogel Composite Film for Glucose Detection with Strong Diffraction Intensity and Linear Response

J. Xiang, Honghua Zhang, Dandan Men, 2019, Nanomaterials.

The Oxidation of Co-5Si Alloys in 1 atm of Pure O2 at 700 and 800°C

J. Xiang, Haitao Sun, H. Zhang, 2012 .

Highly efficient production of ordered wafer-scale gold nanoparticle arrays film by simple heat treatment based on colloidal monolayer

Huilin Li, J. Xiang, Honghua Zhang, 2018, International Journal of Modern Physics B.

Preparation of Inorganic Hollow Spheres Based on Different Methods

J. Xiang, Changyuan Hu, S. Duo, 2010 .

Microwave hydrothermal synthesis of nanocrystalline rutile

Zehua Zhou, J. Xiang, Ming-sheng Li, 2008 .

High-tunability and low-leakage current of the polycrystalline compositionally graded (Ba,Sr)TiO3 thin films derived by a sol–gel process

Tianjin Zhang, J. Xiang, Jun Wang, 2008 .

Author response for "Synthesis of a highly stable Pt/ CeO 2 / Al 2 O 3 catalyst for gasoline engine emission control by adjusting pt distribution"

Xin Huang, J. Xiang, L. Lan, 2021, The Canadian Journal of Chemical Engineering.

Temperature memory effect induced by incomplete transformation in TiNi-based shape memory alloy

J. Xiang, S. Guo, S. Duo, 2006 .

Effect of Yttrium Addition on Cyclic Oxidation Behavior of Co-10Cr-10Al Alloys at 1073K

F. Xie, J. Xiang, Jun Wang, 2015 .

In vitro biocompatibility and antibacterial behavior of anodic coatings fabricated in an organic phosphate containing solution on Mg–1.0Ca alloys

J. Xiang, R. F. Zhang, S. Zhang, 2016 .

Formation process of micro arc oxidation coatings obtained in a sodium phytate containing solution with and without CaCO3 on binary Mg-1.0Ca alloy

J. Xiang, R. F. Zhang, S. F. Zhang, 2015 .

Formation of Microcracks During Micro-Arc Oxidation in a Phytic Acid-Containing Solution on Two-Phase AZ91HP

J. Xiang, R. F. Zhang, S. F. Zhang, 2016, Journal of Materials Engineering and Performance.

Preparation of Porous Si3N4 Based Ceramics by Combustion Synthesis

J. Xiang, Bao-lin Zhang, W. Li, 2007 .

Critical Al content to form external-alumina scales on Cu-Al alloys

Y. Niu, J. Xiang, Weitao Wu, 2007 .

Biocompatibility of micro-arc oxidation coatings developed on Ti6Al4V alloy in a solution containing organic phosphate

J. Xiang, S. F. Zhang, Rongfa Zhang, 2015 .

Osteogenic potential of a novel microarc oxidized coating formed on Ti6Al4V alloys

Cheng-Iin Li, J. Xiang, R. F. Zhang, 2017 .

Effect of copper additive on microstructure and anti-corrosion performance of black MAO films grown on AZ91 alloy and coloration mechanism

J. Xiang, B. Y. Wang, R. He, 2022 .

Investigation of Zinc and Phosphorus Elements Incorporated into Micro-Arc Oxidation Coatings Developed on Ti-6Al-4V Alloys

J. Xiang, Honghua Zhang, Ying Zhao, 2018, Materials.

Oxidation Behavior of Quaternary Co-20Re-25Cr-3Si Alloy at Laboratory Air

Huan Wei, J. Xiang, Mingfeng Liu, 2021, Frontiers in Materials.

The oxidation of two ternary Ni–Cu–10 at.% Al alloys in 1 atm of pure O2 at 800–900 °C

Y. Niu, J. Xiang, F. Gesmundo, 2004 .

The Oxidation of Two Ternary Ni–Cu–5 at.%Al Alloys in 1 atm of Pure O2 at 800–900°C

Y. Niu, J. Xiang, F. Gesmundo, 2003 .

Dynamically Tunable Plasmonic Band for Reversible Colorimetric Sensors and SERS Effect with Good Sensitivity and Stability.

Guangqiang Liu, Yiqiang Sun, Lifeng Hang, 2020, ACS applied materials & interfaces.

Noncovalent functionalization of multi-walled carbon nanotubes with siloxane polyether copolymer

Changyuan Hu, Wenkui Li, Mingsheng Li, 2008 .

Comparison of Oxidation Behavior of Binary Co-10X (x=Al, Si, Cr) Alloys at 973 and 1073K

J. Xiang, H. Zhang, Chu Wang, 2013 .

Oxidation Resistance of Co-10Cr-5Si-0.3Y Alloys at 800°C

Yang Zhang, J. Xiang, Peng-xin Li, 2011 .

Oxidation Resistance of Co-10Cr-5Si Alloys in 1 Atm of Pure O2 at 700 and 800 OC

J. Xiang, Wei Wang, H. Zhang, 2011 .

Synthesis of carbon nanotube/anatase titania composites by a combination of sol-gel and self-assembly at low temperature

F. Wei, J. Xiang, Changyuan Hu, 2011 .

Comparison of photocatalytic performance of anatase TiO2 prepared by low and high temperature route

J. Xiang, Changyuan Hu, S. Duo, 2011 .

Oxidation of two ternary Fe-Cu-5Al alloys in 1×105 Pa pure oxygen at 700 °C

Y. Niu, J. Xiang, Weitao Wu, 2006 .

Physical process-aided fabrication of periodic Au–M (M = Ag, Cu, Ag–Cu) alloyed nanoparticle arrays with tunable localized surface plasmon resonance and diffraction peaks

Huilin Li, J. Xiang, Honghua Zhang, 2018, RSC advances.

High temperature scaling of Ni-15Cu-5Al alloy in 1×105 Pa pure oxygen

Y. Niu, J. Xiang, Weitao Wu, 2004 .

Nanoplatforms with Remarkably Enhanced Absorption in the Second Biological Window for Effective Tumor Thermo-Radiotherapy.

J. Xiang, Guihua Jiang, Tao Zhang, 2019, ACS applied materials & interfaces.

Microstructure, optical and dielectric properties of compositional graded (Ba,Sr)TiO3 thin films derived by RF magnetron sputtering

J. Xiang, S. Duo, Ming-sheng Li, 2009 .

Oxidation mechanism of three Fe-Al alloys with and without addition of 0.1 at% yttrium at 800 °C

J. Xiang, Honghua Zhang, Mingfeng Liu, 2020 .

The Oxidation of Co-5Al Alloys in 1 Atm of Pure O2 at 700 and 800 OC

J. Xiang, Wei Wang, H. Zhang, 2011 .

Oxidation Behavior of Ternary Co-10Cr-5Al Alloys at 700 and 800°C

J. Xiang, H. Zhang, Yi Li, 2012 .

The Oxidation of Co-10Cr Alloys in 1 Atm of Pure O2 at 700 and 800οC

L. Huang, J. Xiang, H. Zhang, 2011 .

Cyclic Oxidation Resistance of Co-10Cr-5Al-0.3Y Alloy at 800 oc

J. Xiang, H. Zhang, Lingyun Bai, 2014 .

Effects of Yttrium on Cyclic Oxidation Resistance of Co-10Cr-5Al Alloy

J. Xiang, X. Xu, Lingyun Bai, 2013 .

Effect of Yttrium Addition on High Temperature Oxidation Resistance of Co-10Cr-5Al Alloys

Di Wu, J. Xiang, H. Zhang, 2011 .

Influence of YSZ buffer layer on the electric properties of compositionally graded (Ba, Sr)TiO3 thin film

Tianjin Zhang, H. Xia, J. Xiang, 2008 .