A. Parsons

发表

Optimisation of composite bone plates for ulnar transverse fractures.

N. D. Chakladar, L. Harper, A. Parsons, 2016, Journal of the mechanical behavior of biomedical materials.

Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: in-situ polymerisation versus laminate stacking

C. Rudd, Jiawa Lu, D. Irvine, 2017 .

Retention of mechanical properties and cytocompatibility of a phosphate-based glass fiber/polylactic acid composite.

C. Rudd, J. Knowles, E. A. Abou Neel, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Cytocompatibility and Mechanical Properties of Short Phosphate Glass Fibre Reinforced Polylactic Acid (PLA) Composites: Effect of Coupling Agent Mediated Interface

G. Walker, A. Parsons, I. Ahmed, 2012, Journal of functional biomaterials.

Preparation and characterization of composites using blends of divinylbenzene‐based hyperbranched and linear functionalized polymers

Sumaya F. Kabir, D. Irvine, A. Parsons, 2021, Polymers for Advanced Technologies.

Comparison of thermal, thermomechanical, and rheological properties of blends of divinylbenzene‐based hyperbranched and linear functionalized polymers

Sumaya F. Kabir, D. Irvine, A. Parsons, 2020, Journal of Applied Polymer Science.

The mechanical property, degradation and cytocompatibility analysis of novel phosphate glass fiber textiles

Xiaoling Liu, A. Parsons, I. Ahmed, 2018, Textile Research Journal.

Real-time dissolution of P40Na20Ca16Mg24 phosphate glass fibers

I. A. Jones, C. Rudd, G. Walker, 2009 .

HEAT-TREATMENT OF PHOSPHATE GLASS FIBRES AND ITS EFFECT ON COMPOSITE PROPERTY RETENTION

C. Rudd, A. Parsons, I. Ahmed, 2022 .

Glass forming region and physical properties in the system P2O5-Na2O–Fe2O3

C. Rudd, A. Parsons, 2008 .

Properties of sodium-based ternary phosphate glasses produced from readily available phosphate salts

C. Rudd, G. Walker, A. Parsons, 2006 .

The effect of production regime and crucible materials on the thermal properties of sodium phosphate glasses produced from salts.

C. Rudd, G. Walker, A. Parsons, 2004, Journal of biomedical materials research. Part B, Applied biomaterials.

Synthesis and degradation of sodium iron phosphate glasses and their in vitro cell response.

C. Rudd, A. Parsons, C. Scotchford, 2004, Journal of biomedical materials research. Part A.

Novel bioresorbable phosphate glass fiber textile composites for medical applications

C. Rudd, Xiaoling Liu, Jingsong Liu, 2018 .

Novel bioresorbable textile composites for medical applications

C. Rudd, Xiaoling Liu, Jingsong Liu, 2017 .

Bioresorbable screws reinforced with phosphate glass fibre: manufacturing and mechanical property characterisation.

C. Rudd, A. Parsons, I. Ahmed, 2013, Journal of the mechanical behavior of biomedical materials.

DEVELOPING AN IN-SITU POLYMERISATION PROCESS FOR BIOCOMPOSITE MANUFACTURE

C. Rudd, D. Irvine, A. Parsons, 2015 .

Improved phosphate‐based glass fiber performance achieved through acid etch/polydopamine treatment

D. Grant, A. Parsons, R. Felfel, 2019, International Journal of Applied Glass Science.

Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid)

C. Rudd, G. Walker, W. Thielemans, 2011, Journal of Materials Science.

Effect of magnesium content on bioactivity of near invert phosphate‐based glasses

T. Islam, N. Sharmin, A. Parsons, 2017 .

Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites

C. Rudd, A. Parsons, I. Ahmed, 2015, Journal of Materials Science.

In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: In vitro degradation and mechanical properties.

C. Rudd, D. Irvine, A. Parsons, 2016, Journal of the mechanical behavior of biomedical materials.

Magnesium coated phosphate glass fibers for unidirectional reinforcement of polycaprolactone composites.

C. Rudd, Xiaoling Liu, D. Grant, 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres

C. Rudd, W. Thielemans, A. Parsons, 2014 .

Mechanical and Degradation Properties of Phosphate Based Glass Fibre/PLA Composites with different Fibre Treatment Regimes

I. A. Jones, C. Rudd, G. Walker, 2010 .

Effect of Iron Phosphate Glass on the Physico-mechanical Properties of Jute Fabric-reinforced Polypropylene-based Composites

C. Rudd, N. Sharmin, K. Dey, 2011 .

Wet and Dry Flexural High Cycle Fatigue Behaviour of Fully 1 Bioresorbable Glass Fibre Composites : In-situ Polymerisation versus 2 Laminate Stacking

C. Rudd, Jiawa Lu, D. Irvine, 2017 .

Cytocompatibility, degradation, mechanical property retention and ion release profiles for phosphate glass fibre reinforced composite rods.

C. Rudd, A. Parsons, I. Ahmed, 2013, Materials science & engineering. C, Materials for biological applications.

L-DOPA coating improved phosphate glass fibre strength and fibre/matrix interface.

C. Rudd, N. Sharmin, A. Parsons, 2022, Journal of the mechanical behavior of biomedical materials.

Viscosity profiles of phosphate glasses through combined quasi-static and bob-in-cup methods

N. Sharmin, A. Parsons, S. Shaharuddin, 2015 .

Modification and Application of Albizia lebbeck Sawdust For The Sorption of Lead(II) and Copper(II) From Aqueous Solutions

S. Young, A. Parsons, T. R. Choudhury, 2020 .

Structure–properties relationships in fibre drawing of bioactive phosphate glasses

F. Muñoz, G. Tricot, L. Muñoz-Senovilla, 2017, Journal of Materials Science.

Degradation properties and microstructural analysis of 40P2O5–24MgO–16CaO–16Na2O–4Fe2O3 phosphate glass fibres

C. Rudd, G. Walker, A. Parsons, 2013 .

Structural, thermal, in vitro degradation and cytocompatibility properties of P2O5-B2O3-CaO-MgO-Na2O-Fe2O3 glasses

C. Rudd, Xiaoling Liu, Jingsong Liu, 2017 .

Cytocompatibility and Effect of Increasing MgO Content in a Range of Quaternary Invert Phosphate-based Glasses

C. Rudd, G. Walker, A. Parsons, 2010, Journal of biomaterials applications.

Weight loss, ion release and initial mechanical properties of a binary calcium phosphate glass fibre/PCL composite.

J C Knowles, C. Rudd, J. Knowles, 2008, Acta biomaterialia.

Effects of ZnO addition on thermal properties, degradation and biocompatibility of P45Mg24Ca16Na(15−x)Znx glasses

C. Rudd, N. Sharmin, A. Parsons, 2019, Biomedical Glasses.

Water resistant fibre/matrix interface in a degradable composite: Synergistic effects of heat treatment and polydopamine coating

D. Grant, A. Parsons, R. Felfel, 2021, Composites Part A: Applied Science and Manufacturing.

Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5

C. Rudd, N. Sharmin, A. Parsons, 2014, Journal of biomaterials applications.

In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods.

C. Rudd, G. Walker, A. Parsons, 2011, Journal of the mechanical behavior of biomedical materials.

Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents

Chris D. Rudd, Ifty Ahmed, Andrew J. Parsons, 2010 .

Effects of Fe2O3 addition and annealing on the mechanical and dissolution properties of MgO-and CaO-containing phosphate glass fibres for bio-applications

Chris D. Rudd, Ifty Ahmed, Chenkai Zhu, 2018, Biomedical Glasses.

Structural, thermal and dissolution properties of MgO- and CaO-containing borophosphate glasses: effect of Fe2O3 addition

Chris D. Rudd, Ifty Ahmed, Nusrat Sharmin, 2017, Journal of Materials Science.

Effect of Boron Addition on the Thermal, Degradation, and Cytocompatibility Properties of Phosphate-Based Glasses

C. Rudd, N. Sharmin, D. Furniss, 2013, BioMed research international.

Influence of screw holes and gamma sterilization on properties of phosphate glass fiber-reinforced composite bone plates

C. Rudd, B. Scammell, L. Harper, 2013, Journal of biomaterials applications.

Bioresorbable composite screws manufactured via forging process: pull-out, shear, flexural and degradation characteristics.

C. Rudd, A. Parsons, I. Ahmed, 2013, Journal of the mechanical behavior of biomedical materials.

Material characterisation and cytocompatibility assessment of quinternary phosphate glasses

G. Walker, A. Parsons, I. Ahmed, 2012, Journal of Materials Science: Materials in Medicine.

Investigation of Crystallinity, Molecular Weight Change, and Mechanical Properties of PLA/PBG Bioresorbable Composites as Bone Fracture Fixation Plates

C. Rudd, G. Walker, A. Parsons, 2012, Journal of biomaterials applications.

Composites for bone repair: phosphate glass fibre reinforced PLA with varying fibre architecture

I. A. Jones, C. D. Rudd, C. A. Scotchford, 2011, Journal of materials science. Materials in medicine.

Neutron scattering and ab initio molecular dynamics study of cross-linking in biomedical phosphate glasses

C. Rudd, E. Pellegrini, M. Johnson, 2010, Journal of physics. Condensed matter : an Institute of Physics journal.

Comparison of phosphate-based glasses in the range 50P(2)O(5)-(50-x)CaO-xNa(2)O prepared using different precursors

C. Rudd, J. Knowles, S. Nazhat, 2008 .

Repair of calvarial defects in rats by prefabricated, degradable, long fibre composite implants.

C. Rudd, A. Parsons, M. Evans, 2011, Journal of biomedical materials research. Part A.

Analysis of calvarial bone defects in rats using microcomputed tomography: potential for a novel composite material and a new quantitative measurement.

C. Rudd, A. Parsons, G. Aitchison, 2009, The British journal of oral & maxillofacial surgery.

The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses.

N. Sharmin, G. Rance, A. Parsons, 2019, Journal of biomedical materials research. Part B, Applied biomaterials.

Phosphate Glass Fibre Composites for Bone Repair

Chris D. Rudd, Ifty Ahmed, Andrew J. Parsons, 2009 .

Effect of dissolution rate and subsequent ion release on cytocompatibility properties of borophosphate glasses

N. Sharmin, C. Pang, A. Parsons, 2019, Biomedical Glasses.

Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites.

C. Rudd, N. Sharmin, A. Parsons, 2016, Journal of the mechanical behavior of biomedical materials.

Biodegradable Composite Materials as Bone Regenerative Implants

I. A. Jones, C. Rudd, G. Walker, 2009 .

The Glass Transition Temperature of Iron and Titanium Containing Phosphate Based Glasses

C. Rudd, D. Furniss, A. Parsons, 2015 .

Effect of boron oxide addition on the viscosity-temperature behaviour and structure of phosphate-based glasses.

Ifty Ahmed, Nusrat Sharmin, Daniel Boyd, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

Effectiveness of 3-Aminopropyl-Triethoxy-Silane as a Coupling Agent for Phosphate Glass Fiber-Reinforced Poly(caprolactone)-based Composites for Fracture Fixation Devices

I. A. Jones, C. Rudd, G. Walker, 2011 .

Preparation and Characterization of Phosphate Glass Fibers and Fabrication of Poly(caprolactone) Matrix Resorbable Composites

I. A. Jones, C. Rudd, A. Parsons, 2010 .

Production and characterisation of novel phosphate glass fibre yarns, textiles, and textile composites for biomedical applications.

C. Rudd, N. Sharmin, Xiaoling Liu, 2019, Journal of the mechanical behavior of biomedical materials.

Structure, viscosity and fibre drawing properties of phosphate-based glasses: effect of boron and iron oxide addition

Chris D. Rudd, Ifty Ahmed, Nusrat Sharmin, 2016, Journal of Materials Science.

Investigating the use of coupling agents to improve the interfacial properties between a resorbable phosphate glass and polylactic acid matrix

Ifty Ahmed, C. Rudd, G. Walker, 2013, Journal of biomaterials applications.

Mimicking Bone Structure and Function with Structural Composite Materials

C. Rudd, A. Parsons, I. Ahmed, 2010 .

Correction: Ga and Ce ion-doped phosphate glass fibres with antibacterial properties and their composite for wound healing applications.

W. Goldmann, A. Boccaccini, A. Parsons, 2019, Journal of materials chemistry. B.

Ga and Ce ion-doped phosphate glass fibres with antibacterial properties and their composite for wound healing applications.

W. Goldmann, A. Boccaccini, A. Parsons, 2019, Journal of materials chemistry. B.

The influence of coupling agents on mechanical property retention and long-term cytocompatibility of phosphate glass fibre reinforced PLA composites.

G. Walker, A. Parsons, I. Ahmed, 2013, Journal of the mechanical behavior of biomedical materials.

Surface treatment of phosphate glass fibers using 2‐hydroxyethyl methacrylate: Fabrication of poly(caprolactone)‐based composites

I. A. Jones, C. Rudd, G. Walker, 2009 .

Cytocompatibility assessment of chemical surface treatments for phosphate glass to improve adhesion between glass and polyester.

G. Walker, A. Parsons, I. Ahmed, 2013, Journal of biomedical materials research. Part A.

Characterisation of thermoset laminates for cosmetic automotive applications: Part II – Cure and residual volatile assessment

E. Lester, C. Rudd, P. Schubel, 2006 .

Controlling mass loss from RTM6 epoxy resin under simulated vacuum infusion conditions

F. Thomann, P. Schubel, A. Parsons, 2022, Polymer Testing.

Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber‐reinforced PLA composites

Chris D. Rudd, Kristofer J. Thurecht, Ifty Ahmed, 2010 .

High cellulose nanowhisker content composites through cellosize bonding

C. Rudd, W. Thielemans, A. Parsons, 2012 .

Characterisation of bone regeneration in 3D printed ductile PCL/PEG/hydroxyapatite scaffolds with high ceramic microparticle concentrations

Jing Yang, Fanrong Ai, Chuanliang Cao, 2021, Biomaterials Science.

INVESTIGATING THE USE OF CHITOSAN AS A COUPLING AGENT TO IMPROVE THE INTERFACIAL PROPERTIES OF PHOSPHATE GLASS FIBRE/POLYCAPROLACTONE COMPOSITES

C. Rudd, Xiaoling Liu, A. Parsons, 2017 .

Processing and characterization of phosphate glass fiber/polylactic acid commingled yarn composites for commercial production.

C. Rudd, N. Sharmin, Jiapeng Fu, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

Compositional dependency on dissolution rate and cytocompatibility of phosphate-based glasses: Effect of B2O3 and Fe2O3 addition

N. Sharmin, A. Parsons, I. Ahmed, 2017, Journal of tissue engineering.

Initial mechanical properties of phosphate-glass fibre-reinforced rods for use as resorbable intramedullary nails

Chris D. Rudd, L. T. Harper, Ifty Ahmed, 2012, Journal of Materials Science.

Interfacial Properties of Phosphate Glass Fiber/Poly(caprolactone) System Measured Using the Single Fiber Fragmentation Test

I. A. Jones, C. Rudd, A. Parsons, 2011 .

Degradation and Interfacial Properties of Iron Phosphate Glass Fiber-Reinforced PCL-Based Composite for Synthetic Bone Replacement Materials

I. A. Jones, C. Rudd, A. Parsons, 2010 .

IN VIVO TESTING OF A PHOSPHATE GLASS FIBRE / PLA COMPOSITE USING A RABBIT TIBIA MODEL

C. Rudd, R. Pearson, A. Parsons, 2022 .

Magnesium Coated Bioresorbable Phosphate Glass Fibres: Investigation of the Interface between Fibre and Polyester Matrices

C. Rudd, Xiaoling Liu, D. Grant, 2013, BioMed research international.

Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites

C. Rudd, Xiaoling Liu, D. Grant, 2014, Journal of biomaterials applications.

reinforced polycaprolactone composites Mechanical , degradation and cytocompatibility properties of magnesium coated phosphate glass fibre

C. Rudd, Xiaoling Liu, D. Grant, 2014 .

BIOMECHANICAL PROPERTIES OF RESORBABLE COMPOSITE BONE FRACTURE REPAIR PLATES

C. Rudd, B. Scammell, A. Parsons, 2013 .