K. Na

发表

Optimization of design parameters using a response surface method in a cold cross-wedge rolling

H. Lee, G. Lee, D. Yoon, 2008 .

Analysis of electrochemical impedance spectra of anodised pure aluminium foil with various etch tunnel length distributions used for electrolytic capacitors

S. Pyun, K. Na, 2004 .

Effect of sulphate and molybdate ions on pitting corrosion of aluminium by using electrochemical noise analysis

S. Pyun, K. Na, 2006 .

Electrochemical noise analysis of corrosion of pure aluminium in alkaline solution in the presence of SO42− ion, NO3− ion and Na2S additives

S. Pyun, K. Na, 2007 .

Evaluation of Pitting Susceptibility of Aluminum Anodized in Borate and Phosphate Solutions Using EN Analysis

S. Pyun, K. Na, 2007 .

Effect of Passivity of the Oxide Film on Low-pH Stress Corrosion Cracking of API 5L X-65 Pipeline Steel in Bicarbonate Solution

S. Pyun, Y. Kho, K. Na, 2002 .

Effects of SO42−, S2O32− and HSO4− ion additives on the pitting corrosion of pure aluminium in 1 M NaCl solution at 40–70 °C

S. Pyun, K. Na, 2005 .

Analysis of electrochemical noise obtained from pure aluminium in neutral chloride and alkaline solutions

S. Pyun, K. Na, Hong-pyo Kim, 2007 .

A REVIEW ON THE ODSCC OF STEAM GENERATOR TUBES IN KOREAN NPPS

Seung Jin Oh, Yong-Seok Kang, Han-Sub Chung, 2013 .

Characterization of oxide layers formed on type 316 stainless steel exposed to the simulated PWR primary water environment with varying dissolved hydrogen and zinc concentrations

H. Lee, Shuling Meng, C. Jang, 2021 .

Effects of sulphate, nitrate and phosphate on pit initiation of pure aluminium in HCl-based solution

S. Pyun, K. Na, 2007 .

Comparison of susceptibility to pitting corrosion of AA2024-T4, AA7075-T651 and AA7475-T761 aluminium alloys in neutral chloride solutions using electrochemical noise analysis

S. Pyun, K. Na, 2008 .

The fabrication process and mechanical properties of SiCp/Al–Si metal matrix composites for automobile air-conditioner compressor pistons

Hyo Sug Lee, Soon Hyung Hong, S. Hong, 2001 .

Effects of Sulfate and Nitrate Ion Additives on Pit Growth of Pure Aluminum in 0.1 M Sodium Chloride Solution

S. Pyun, K. Na, Jin-Ju Park, 2000 .

Superplastic Deformation Behavior of a Zn-0.3Wt%Al Alloy Fabricated by ECAP

K. Na, K. J. Kim, T. Ha, 2009 .

A study of the hydrostatic extrusion of copper-clad aluminium tube

Seung-Woo Kim, Y. Lee, Seung-Woo Kim, 1997 .