S. Sakai

发表

Strength and reliability analysis of MEMS micromirror

S. Izumi, C. Ping, S. Sakai, 2004 .

Multiscale analysis on the onset of nanoindentation-induced delamination: Effect of high-modulus Ru overlayer

S. Hara, S. Izumi, S. Sakai, 2009 .

Development of New Metallic Gasket and its Optimum Design for Leakage Performance

Satoshi Izumi, Shinsuke Sakai, Masato Nagawa, 2008 .

Study of a Combined FEM-MD Method for Silicon

S. Izumi, S. Sakai, T. Kawakami, 2001 .

Planar mobility modes of 8-bar-jointed structures with a single degree of freedom

Satoshi Izumi, Shinsuke Sakai, Hiro Tanaka, 2012 .

Detecting Method of Striation Region of Fatigue Fracture Surface Using Wavelet Transform

Satoshi Izumi, Shinsuke Sakai, Kenta Yamagiwa, 2004 .

Quantitative Fracture Surface Analysis of Spheroidal Graphite Cast Iron by Run Length Statistics

M. Takanashi, S. Izumi, S. Sakai, 2005 .

ANALYTICAL MODELING OF THE TRANSVERSE LOAD-DISPLACEMENT RELATION OF A BOLTED JOINT WITH CONSIDERATION OF THE MECHANICAL BEHAVIOR ON CONTACT SURFACES

T. Yokoyama, S. Izumi, S. Sakai, 2009 .

A modified 'Hawkyard's method to predict the deformation of projectiles in Taylor impact tests

S. Sakai, T. Kumagai, H. Yamada, 2020 .

New Method of Analyzing Adhesion/Friction in Resin-molded Structures and its Application to Insulated Rods

S. Izumi, S. Sakai, Miki Yamazaki, 2010 .

New Method of Adhesion/Friction Analysis for Resin Molded Structures and Its Application to Air-Insulated Rod( Design or Process Technology for Mechanical and Adhesive Joint Structures)

S. Izumi, S. Sakai, Miki Yamazaki, 2009 .

PS35 Development of the method for quantitative evaluation of safety margin of piping

Satoshi Izumi, Shinsuke Sakai, Hiroshi Hirayama, 2010 .

Prediction of the friction coefficient of filled rubber sliding on dry and wet surfaces with self-affine large roughness

H. Kadowaki, S. Izumi, S. Sakai, 2016 .

Development of an RBM System for Marine Engines and Equipment

Hiromi Shiihara, Shinsuke Sakai, Kunio Tagami, 2009 .

403 THE RELIABILITY INVESTIGATION ON THE ASSESSMENT CRITERIA FOR LOCAL METAL LOSS BASED ON API 579-1/ASME FFS-1

Satoshi Izumi, Shinsuke Sakai, Takuyo Kaida, 2010 .

Performance index and rational maintenance method of cut slope in consideration of long-term deterioration

Hiroshi Yamazaki, Shinsuke Sakai, Shinsuke Sakai, 2017 .

067 Finite Element Analysis of Head and Cervical Spine Injury Mechanisms for Launch Abort Systems

Shinsuke Sakai, Satoshi Izumi, Keiichiro Fujimoto, 2015 .

Development of specimen and test method for strength analysis of MEMS micromirror

M. Yamaguchi, S. Izumi, C. Ping, 2005 .

Simulations of an Interface Crack Nucleation During Nanoindentaion : Molecular Dynamics and Finite Element Coupling Approach

S. Hara, S. Izumi, S. Sakai, 2008 .

Computer Aided Instruction for Finite Element Method

Toshiaki Hisada, Shinsuke Sakai, T. Hisada, 1989 .

Development of a Method for Making Interatomic Potential: An Application to Metallic Systems

S. Hara, S. Izumi, S. Sakai, 2007 .

Dimethyl carbonate synthesis by oxidative carbonylation on activated carbon supported CuCl2 catalysts: catalytic properties and structural change

K. Tomishige, K. Fujimoto, T. Sakaihori, 1999 .

Influence of ICP Etching Damage on the Brittle-Fracture Strength of Single-Crystal Silicon

K. Murakami, S. Izumi, S. Sakai, 2007 .

Reaction pathway analysis for differences in motion between C-core and Si-core partial dislocation in 3C-SiC

S. Hara, S. Izumi, S. Sakai, 2015 .

Diagnostic Method for Delamination Monitoring of CFRP Plate Using Kriging Interpolation Method

Akira Todoroki, Atsushi Iwasaki, Satoshi Izumi, 2007 .

Bayesian Inference of Fatigue Life Estimated by Inspection Data

Atsushi Iwasaki, Shinsuke Sakai, Satoshi Izumi, 2005 .

Reaction pathway analysis for shuffle-set 60° perfect dislocation in Si

S. Izumi, S. Sakai, Asuka Hatano, 2016 .

Reaction pathway analysis for dislocation nucleation from a sharp corner in silicon: Glide set versus shuffle set

S. Izumi, S. Sakai, Koichiro Shima, 2010 .

Sensitivity analysis of total CO2 emission intensities estimated using an input–output table

Shinsuke Sakai, Hiroki Hondo, Shiro Tanno, 2002 .

Effect of machined surface condition on fatigue strength of Ni based superalloy Alloy 718

Shota Hasunuma, S. Izumi, S. Sakai, 2015 .

J0403-1-4 Evaluating Strength of Adhesive Interface between Ceramic and Resin in Resin-Molded Structures

S. Izumi, S. Sakai, T. Iwasaki, 2010 .

Development of a molecular dynamics potential for Si–H systems and its application to CVD reaction processes

Satoshi Izumi, Shinsuke Sakai, Shotaro Hara, 2004 .

Saddle‐shape warpage of thick 3C‐SiC wafer: Effect of nonuniform intrinsic stress and stacking faults

S. Izumi, S. Sakai, H. Nagasawa, 2012 .

Application of three-dimensional dislocation dynamics simulation to the STI semiconductor structure

S. Izumi, S. Sakai, T. Miyake, 2005 .

Origin of the Warpage of 3C-SiC Wafer: Effect of Nonuniform Intrinsic Stress

S. Izumi, S. Sakai, H. Nagasawa, 2012 .

Surface energy, stress and structure of well-relaxed amorphous silicon: A combination approach of ab initio and classical molecular dynamics

S. Hara, S. Izumi, S. Sakai, 2005 .

Evaluation of Structural and Mechanical Properties of Amorphous Silicon Surabaces by a Combination Approach of Ab-initio and Classical Molecular Dynamics

S. Hara, S. Izumi, S. Sakai, 2005 .

A method to determine the parameter of the Tsurui-Ishikawa stochastic fatigue crack growth solution

Shinsuke Sakai, Tetsuya Sasaki, Hiroyuki Okamura, 1995 .

Investigation into the self-loosening behavior of bolted joint subjected to rotational loading

Satoshi Izumi, Shinsuke Sakai, Mårten Olsson, 2012 .

Anisotropy Behavior of Dislocation Nucleation from a Sharp Corner in Copper

S. Hara, S. Izumi, S. Sakai, 2011 .

Development of a Bond-Order Potential that can Reproduce the Elastic Constants and Melting Point of Silicon

S. Hara, S. Izumi, S. Sakai, 2006 .

Damage and Fault Diagnosis of In-service Structure via Statistical Comparison of Relation between Sensor Measurements (Damage Diagnosis of the Ventilator Jet-Fan)

Yoshinobu Shimamura, Atsushi Iwasaki, Akira Todoroki, 2006 .

Core element effects on dislocation nucleation in 3C–SiC: Reaction pathway analysis

S. Izumi, S. Sakai, H. Nagasawa, 2013 .

Estimating the statistical properties of fatigue crack growth using spectral analysis technique

S. Sakai, H. Okamura, Tetsuya Sasaki, 1992 .

A method for calculating surface stress and surface elastic constants by molecular dynamics: application to the surface of crystal and amorphous silicon

S. Hara, S. Izumi, S. Sakai, 2004 .

Classification of amorphous-silicon microstructures by structural parameters: molecular dynamics study

S. Hara, S. Izumi, S. Sakai, 2004 .

Elastic Properties of the Surfaces and Interfaces of Crystal and Amorphous Silicon

S. Hara, S. Izumi, S. Sakai, 2004 .

Structural and mechanical properties of well-relaxed amorphous–crystal interface in silicon: molecular dynamics study

S. Hara, S. Izumi, S. Sakai, 2004 .

A FEM-MD combination method for silicon

S. Izumi, S. Sakai, T. Kawakami, 1999, 1999 International Conference on Simulation of Semiconductor Processes and Devices. SISPAD'99 (IEEE Cat. No.99TH8387).

Internal Displacement and Elastic Properties of the Silicon Tersoff Model

S. Izumi, S. Sakai, 2004 .

Three-dimensional Finite Element Analysis of Tightening and Loosening Mechanism of Threaded Fastener

Atsushi Iwasaki, Satoshi Izumi, Shinsuke Sakai, 2005 .

Reaction Pathway Analysis of Homogeneous Dislocation Nucleation in a Perfect Molybdenum Crystal

S. Hara, S. Izumi, S. Sakai, 2011 .

Transition Pathway Analysis of Homogeneous Dislocation Nucleation in a Perfect Silicon Crystal

S. Hara, S. Izumi, S. Sakai, 2009 .

Verification of Anti-Loosening Performance of Super Slit Nut bv Finite Element Method

Atsushi Iwasaki, Satoshi Izumi, Shinsuke Sakai, 2005 .

Loosening-resistance evaluation of double-nut tightening method and spring washer by three-dimensional finite element analysis

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2009 .

Three-dimensional Finite Element Analysis on Tightening and Loosening Mechanism of Bolted Joint

Atsushi Iwasaki, Shinsuke Sakai, Satoshi Izumi, 2005 .

Extended Bayesian Inference Method for Evaluating Pipe Failure Probability in Corrosion Rate Fluctuation Model

Shinsuke Sakai, Satoshi Izumi, Satoshi Okajima, 2008 .

Reaction pathway analysis for dislocation nucleation from a Ni surface step

S. Hara, S. Izumi, S. Sakai, 2009 .

Formulation of sensitivity analysis in life cycle assessment using a perturbation method

Shinsuke Sakai, Koji Yokoyama, S. Sakai, 2002 .

Damage and Fault Diagnosis of In-service Structure via Statistical Comparison of Relation between Sensor measurements (Damage Diagnosis of in-service Structure under High Noise Environment using Multiple Reference Data)*

Yoshinobu Shimamura, Atsushi Iwasaki, Akira Todoroki, 2006 .

Small Loosening of Bolt-Nut Tightening System due to Micro Bearing-Surface Slip: Finite Element Method Study

Masatake Kimura, Satoshi Izumi, Shinsuke Sakai, 2006 .

Anomaly Detection System by Statistical Analysis of Incorrect Signal About Monitoring System of Railway(Machine Elements, Design and Manufacturing)

Atsushi Iwasaki, Hirotatsu Yamazaki, Shinsuke Sakai, 2010 .

Onset of Wiggling in a Microscopic Patterned Structure Induced by Intrinsic Stress During the Dry Etching Process

Satoshi Izumi, Shinsuke Sakai, Hiro Tanaka, 2014 .

On the Distribution of Rainflow Range for Gaussian Random Processes with Bimodal PSD

Shinsuke Sakai, Hiroyuki Okamura, S. Sakai, 1995 .