C. Wood

发表

Use of energy piles in a residential building, and effects on ground temperature and heat pump efficiency

S. Riffat, C. Wood, Hao Liu, 2009 .

Toward aerogel based thermal superinsulation in buildings: A comprehensive review

Saffa Riffat, Erdem Cuce, Pinar Mert Cuce, 2014 .

Field testing of the QUB method for assessing the thermal performance of dwellings: In situ measurements of the heat transfer coefficient of a circa 1950s detached house in UK

M. Gillott, C. Wood, Vasileios Sougkakis, 2021 .

Bayesian inferences of the thermal properties of a wall using temperature and heat flux measurements

Raul Tempone, Marco Iglesias, Zaid Sawlan, 2016, 1608.03855.

Development of a 1000 W organic Rankine cycle micro-turbine-generator using polymeric structural materials and its performance test with compressed air

Hao Liu, C. Wood, Isaias Hernandez-Carrillo, 2019, Energy Conversion and Management.

On the power law and quadratic forms for representing the leakage-pressure relationship – Case studies of sheltered chambers

C. Wood, Xiaofeng Zheng, 2020 .

Airtightness measurement of an outdoor chamber using the Pulse and blower door methods under various wind and leakage scenarios

C. Wood, Xiaofeng Zheng, Joe Mazzon, 2020 .

Experimental insights into the airtightness measurement of a house-sized chamber in a sheltered environment using blower door and pulse methods

C. Wood, Xiaofeng Zheng, Joe Mazzon, 2019, Building and Environment.

Quantifying airtightness in Brazilian residential buildings with focus on its contribution to thermal comfort

J. Gonçalves, M. Gillott, C. Wood, 2020 .

Estimation of the infiltration rate of UK homes with the divide-by-20 rule and its comparison with site measurements

C. Wood, Xiaofeng Zheng, A. V. Pasos, 2020 .

Optimizing insulation thickness and analysing environmental impacts of aerogel-based thermal superinsulation in buildings

Saffa Riffat, Erdem Cuce, Pinar Mert Cuce, 2014 .

An investigation of the heat pump performance and ground temperature of a piled foundation heat exch

Saffa Riffat, Hao Liu, Christopher J. Wood, 2010 .

Comparison of a modelled and field tested piled ground heat exchanger system for a residential building and the simulated effect of assisted ground heat recharge

Saffa Riffat, Hao Liu, Christopher J. Wood, 2010 .

Comparison between infiltration rate predictions using the divide-by-20 rule of thumb and real measurements

M. Gillott, C. Wood, Xiaofeng Zheng, 2019 .

Experimental study on the measurement of Building Infiltration and Air Leakage rates (at 4 and 50 Pa) by means of Tracer Gas methods, Blower Door and the novel Pulse technique in a Detached UK Home

Jackson, M. Gillott, C. Wood, 2018 .

Experimental Investigation of the Impact of Environmental Conditions on the Measurement of Building Infiltration, and its correlation with Airtightness

Jackson, M. Gillott, C. Wood, 2018 .

Advanced materials for the impeller in an ORC radial microturbine

Hao Liu, Isaias Hernandez-Carrillo, Christopher J. Wood, 2017 .

Improving the airtightness in an existing UK dwelling: The challenges, the measures and their effectiveness

Dennis L. Loveday, Mark Gillott, Ksenia Chmutina, 2016 .

Comparative performance of ‘U-tube’ and ‘coaxial’ loop designs for use with a ground source heat pump.

Saffa Riffat, Hao Liu, Christopher J. Wood, 2012 .

A practical review of alternatives to the steady pressurisation method for determining building airtightness

M. Gillott, C. Wood, Xiaofeng Zheng, 2020, Renewable and Sustainable Energy Reviews.

Quantifying uncertainty in thermophysical properties of walls by means of Bayesian inversion

Marco A. Iglesias, Lia De Simon, Christopher J. Wood, 2017, Energy and Buildings.

A concept review of power line communication in building energy management systems for the small to medium sized non-domestic built environment

Saffa Riffat, Mark Gillott, P. A. Callan, 2016 .

The impact of wind upon the pulse technique measured airtightness of a detached dwelling

M. Gillott, C. Wood, Y. Hsu, 2022, Building and Environment.

Evaluation of the indoor pressure distribution during building airtightness tests using the pulse and blower door methods

M. Gillott, C. Wood, Y. Hsu, 2021 .

Numerical and experimental validations of the theoretical basis for a nozzle based pulse technique for determining building airtightness

C. Wood, Xiaofeng Zheng, E. Cooper, 2020 .

Experimental Studies of a Pulse Pressurisation Technique for Measuring Building Airtightness

Mark Gillott, Xiaofeng Zheng, Saffa Riffat, 2019, Future Cities and Environment.

Field trialling of a pulse airtightness tester in a range of UK homes

Saffa Riffat, Xiaofeng Zheng, David Tetlow, 2019 .

Experimental study of enclosure airtightness of an outdoor chamber using the pulse technique and blower door method under various leakage and wind conditions

C. Wood, Xiaofeng Zheng, Joe Mazzon, 2018 .

A comparison study of the blower door and novel pulse technique on measuring enclosure airtightness in a controlled environment

C. Wood, Xiaofeng Zheng, Joe Mazzon, 2017 .

Insights into the impact of wind on the Pulse airtightness test in a UK dwelling

M. Gillott, S. Lee, C. Wood, 2019 .

Evaluation of indoor pressure distributions in a detached house using the Pulse airtightness measurement technique

M. Gillott, S. Lee, C. Wood, 2019 .

Environmental Technologies in the Built Environment

Parham A. Mirzaei, Wu Yupeng, Benjamin Jones, 2018, A Handbook of Sustainable Building Design and Engineering.

Performance evaluation of a mechanically ventilated heat recovery (MVHR) system as part of a series of UK residential energy retrofit measures

Dennis L. Loveday, Mark Gillott, Christopher J. Wood, 2016 .

Evaluation of the precision and accuracy of the QUB/e method for assessing the as-built thermal performance of a low-energy detached house in UK

M. Gillott, C. Wood, Vasileios Sougkakis, 2021, Energy and Buildings.

Ensemble-marginalized Kalman filter for linear time-dependent PDEs with noisy boundary conditions: application to heat transfer in building walls

R. Tempone, M. Iglesias, C. Wood, 2017, 1711.09365.