Seul-Kee Kim

发表

Statistical estimation of extreme sloshing impact pressure and its validation based on dynamic behavior of insulation materials

Jae‐Myung Lee, Jin-ho Bae, Byeong-Kwan Hwang, 2020 .

Computational evaluation of resistance of fracture capacity for SUS304L of liquefied natural gas insulation system under cryogenic temperatures using ABAQUS user-defined material subroutine

Jeong‐Hyeon Kim, Jae‐Myung Lee, Myung-Hyun Kim, 2013 .

Dynamic Response of Drill Floor to Fire Subsequent to Blowout

Jae‐Myung Lee, Seul-Kee Kim, Teak-Keon Kim, 2020 .

Initial and progressive failure analyses for composite laminates using Puck failure criterion and damage-coupled finite element method

Jae-Myung Lee, Dong-Man Ryu, Chi-Seung Lee, 2015 .

Numerical Analysis of Hydrogen Transport using a Hydrogen-Enhanced Localized Plasticity Mechanism

Jae‐Myung Lee, Myung-Hyun Kim, Seul-Kee Kim, 2012 .

Evaluation of the compression behavior of recycled marine plastic waste-reinforced concrete

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2020, Functional Composites and Structures.

Eco‐friendly blowing agent, HCFO ‐1233zd, for the synthesis of polyurethane foam as cryogenic insulation

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2021, Journal of Applied Polymer Science.

Impact failure analysis of corrugated steel plate in LNG containment cargo system

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2019, Journal of Constructional Steel Research.

Design of Independent Type-B LNG Fuel Tank: Comparative Study between Finite Element Analysis and International Guidance

Jae‐Myung Lee, Seul-Kee Kim, Seong-Bo Park, 2018 .

Experimental Analysis of Boil-Off Gas Occurrence in Independent Liquefied Gas Storage Tank

Jae‐Myung Lee, Jin-ho Bae, Seul-Kee Kim, 2018, Journal of Ocean Engineering and Technology.

Characteristics of pre-strained polyisocyanurate foam: Deformation recovery and compressive mechanical behavior at cryogenic temperature

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2021, Journal of Cellular Plastics.

Analysis of glass fiber reinforced composites in Membrane-Type LNG cargo containment system for structural safety using experimentally defined mechanical properties

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2021 .

Dynamic compressive behavior of rigid polyurethane foam with various densities under different temperatures

Jeong‐Hyeon Kim, Jae‐Myung Lee, Byeong-Kwan Hwang, 2020 .

Application of Gurson Model for Evaluation of Density‐Dependent Mechanical Behavior of Polyurethane Foam: Comparative Study on Explicit and Implicit Method

Jae‐Myung Lee, Seul-Kee Kim, Jeong-Ho Lee, 2016 .

A New Computational Method for Predicting Ductile Failure of 304L Stainless Steel

Jeong‐Hyeon Kim, Y. Choi, Seul-Kee Kim, 2022, Metals.

Proposing a New Route to Solve Marine Debris Pollution Issues: Low-Temperature Eco-friendly Pulverization System by Utilizing LNG Cold Energy

Jeong‐Hyeon Kim, Dong-Ha Lim, Seul-Kee Kim, 2021 .

Effects of ultrasonic dispersion on nanoparticle based polyurethane foam reinforcement

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2021, Polymer Testing.

Cumulative damage of hollow glass microsphere weight fraction in polyurethane foam in response to cryogenic temperatures and repeated impact loading

Jeong‐Hyeon Kim, Jae‐Myung Lee, Byeong-Kwan Hwang, 2020 .

Temperature-Dependent Hydrogen Embrittlement of Austenitic Stainless Steel on Phase Transformation

Jeong‐Hyeon Kim, Seokjun Kim, Seul-Kee Kim, 2022, Metals.

Charpy Impact Properties of Hydrogen-Exposed 316L Stainless Steel at Ambient and Cryogenic Temperatures

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2019, Metals.

Effect of PTFE coating on enhancing hydrogen embrittlement resistance of stainless steel 304 for liquefied hydrogen storage system application

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2020 .

Low-Temperature Mechanical Behavior of Super Duplex Stainless Steel with Sigma Precipitation

Jae‐Myung Lee, Seul-Kee Kim, M. Kim, 2015 .

A constitutive equation for predicting the material nonlinear behavior of AISI 316L, 321, and 347 stainless steel under low-temperature conditions

Jeong‐Hyeon Kim, Jae‐Myung Lee, Myung-Hyun Kim, 2014 .

Effects of Environmental Conditions on the Mechanical and Degradation Behavior of Polyurethane Foam Subjected to Various Deformation Histories

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2019, Journal of Materials Engineering and Performance.

Unified constitutive model with consideration for effects of porosity and its application to polyurethane foam

Sungkyun Park, Jae‐Myung Lee, K. Park, 2018 .

Effect of temperature on the mechanical performance of plywood used in membrane-type LNG carrier insulation systems

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2020, Journal of Wood Science.

Numerical Model for Mechanical Nonlinearities of High Manganese Steel Based on the Elastoplastic Damage Model

Jong-hwan Kim, Jeong‐Hyeon Kim, Jae‐Myung Lee, 2018, Metals.

Estimation of Fatigue Crack Growth Rate for 7% Nickel Steel under Room and Cryogenic Temperatures Using Damage-Coupled Finite Element Analysis

Jeong‐Hyeon Kim, Jae‐Myung Lee, Myung-Hyun Kim, 2015 .

Effects of cryogenic temperature on the mechanical and failure characteristics of melamine-urea-formaldehyde adhesive plywood

Doo-hwan Park, S. Choi, Jeong‐Hyeon Kim, 2018 .

Cryogenic Reliability Evaluation of Glass Fabric–Reinforced Composites Using Novel Slip-Prevention Method

Yong‐Cheol Jeong, Jeong‐Hyeon Kim, Seul-Kee Kim, 2022, Materials.

Proposing a new solution for marine debris by utilizing on-board low-temperature eco-friendly pulverization system

Jeong‐Hyeon Kim, Jae‐Myung Lee, Dong-Ha Lim, 2021, Scientific Reports.

Experimental and Numerical Predictions of Cryogenic Leakages in Welded Steel Plates

Jeong‐Hyeon Kim, Y. Choi, Seul-Kee Kim, 2023, Applied Sciences.

Evaluation of the pressure-resisting capability of membrane-type corrugated sheet under hydrodynamic load

Jae-Myung Lee, Yong-Tai Kim, Yeon-Jae Jeong, 2021 .

Impact behavior of hollow glass bubble reinforced foam core LNG insulation panel in cryogenic temperature

Jeong‐Hyeon Kim, Jae‐Myung Lee, Byeong-Kwan Hwang, 2020, Journal of Composite Materials.

Effect of temperature on the mechanical performance of plywood used in membrane-type LNG carrier insulation systems

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2020, Journal of Wood Science.

Effect of irradiation on the cryogenic mechanical characteristics of polyurethane foam

Sungkyun Park, Jae‐Myung Lee, K. Park, 2018, Journal of Radioanalytical and Nuclear Chemistry.

Temperature-Dependent Viscoplastic-Damage Constitutive Model for Nonlinear Compressive Behavior of Polyurethane Foam

Jae‐Myung Lee, Seul-Kee Kim, Jeong-Ho Lee, 2016 .

Evaluation of mechanical properties of glass fiber-reinforced composites depending on length and structural anisotropy

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2023, Results in Engineering.

Evaluation of Cryogenic Fracture Performance of Insulation Panel in LNG Carrier using Computational Method

D. Oh, Jae‐Myung Lee, Myung-Hyun Kim, 2013 .

Impact Failure Characteristics of LNG Carrier Cargo Containment System

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2022, International Journal of Mechanical Sciences.

Comparative study on deformation and mechanical behavior of corroded pipe: Part I–Numerical simulation and experimental investigation under impact load

Jae-Myung Lee, Lei Wang, Seul-Kee Kim, 2017 .

Comparative Study on Mechanical Behavior after Deformation Recovery of Polymeric Foam for Ships and Offshore Structures

Jong-hwan Kim, Jae‐Myung Lee, Seul-Kee Kim, 2016 .

Numerical model to predict deformation of corrugated austenitic stainless steel sheet under cryogenic temperatures for design of liquefied natural gas insulation system

Myung-Hyun Kim, Jae-Myung Lee, Seul-Kee Kim, 2014 .

Development of Computational Evaluation Method for Fatigue Crack Growth Rate based on Viscoplastic-Damage Model

Jae-Myung Lee, Chi-Seung Lee, Jeong-Hyeon Kim, 2015 .

Influence of Cellulose Nanocrystal on the Cryogenic Mechanical Behavior and Thermal Conductivity of Polyurethane Composite

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2020, Journal of Polymers and the Environment.

Ship Structures: Design Loads and Reliability Assessment

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2023, Applied Sciences.

Influence of Silica-Aerogel on Mechanical Characteristics of Polyurethane-Based Composites: Thermal Conductivity and Strength

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2021, Materials.

Experimental Investigation of Structural Response of Corrugated Steel Sheet Subjected to Repeated Impact Loading: Performance of LNG Cargo Containment System

Jae-Myung Lee, Jae-Myung Lee, Jeong-Hyeon Kim, 2019, Applied Sciences.

Analysis of the mechanical properties of polymer materials considering lateral confinement effects

Jeong‐Hyeon Kim, Jae‐Myung Lee, Seul-Kee Kim, 2019, Journal of Polymer Engineering.

Effect of Aramid Fiber on the Properties of Glass Fiber-Reinforced Composite for Cryogenic Applications

Jeong‐Hyeon Kim, Seul-Kee Kim, Jeong-Dae Kim, 2022, Applied Composite Materials.

Numerical Simulation of Membrane of LNG Insulation System using User Defined Material Subroutine

Jae-Myung Lee, Jeong-Hyeon Kim, Myung-Soo Kim, 2014 .

Experimental Study and Development of Design Formula for Estimating the Ultimate Strength of Curved Plates

Doo-hwan Park, Jeong‐Hyeon Kim, Jae‐Myung Lee, 2021, Applied Sciences.

Modified Gurson Model to Describe Non-linear Compressive Behaviour of Polyurethane Foam with Considering Density Effect

Seul-Kee Kim, Jeong-Ho Lee, Jaemyung Lee, 2015 .