Kaisheng Ming

发表

Influence of Metal Additives on Microstructure and Properties of Amorphous Metal–SiOC Composites

M. Nastasi, Kaisheng Ming, Q. Su, 2019, JOM.

Remarkable ductility in metastable refractory high entropy alloys via BCC-FCC/α″ martensitic transformations

Benpeng Wang, Liang Wang, Yunfei Xue, 2021, Applied Physics Letters.

Grain boundary decohesion by nanoclustering Ni and Cr separately in CrMnFeCoNi high-entropy alloys

Zhiming Li, Kaisheng Ming, Jian Wang, 2019, Science Advances.

Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures

Kaisheng Ming, Jian Wang, X. Bi, 2019, International Journal of Plasticity.

Segregation of Mo atoms into stacking faults in CrFeCoNiMo alloy

Kaisheng Ming, Jian Wang, X. Bi, 2019, Philosophical Magazine.

In situ observation of transmission and reflection of dislocations at twin boundary in CoCrNi alloys

Kaisheng Ming, Qing Liu, Xiao-fang Yang, 2020 .

Strength and plasticity of amorphous ceramics with self-patterned nano-heterogeneities

M. Nastasi, L. Shao, Kaisheng Ming, 2020 .

Quantifying the Resistance to Dislocation Glide in Single Phase FeCrAl Alloy

Kaisheng Ming, D. Xie, Jian Wang, 2020, International Journal of Plasticity.

In situ observation of transmission and reflection of dislocations at twin boundary in CoCrNi alloys

Kaisheng Ming, Yanxiang Liang, Xiaofang Yang, 2020, Science China Technological Sciences.

High entropy alloy as a highly active and stable electrocatalyst for hydrogen evolution reaction

Guoliang Zhang, Jianli Kang, Zhijia Zhang, 2018, Electrochimica Acta.

Synergistic strengthening of Al–SiC composites by nano-spaced SiC-nanowires and the induced high-density stacking faults

James Ze Wang, Wenshu Yang, Kaisheng Ming, 2023, Composites Part B: Engineering.

Enhancing strength and ductility via crystalline-amorphous nanoarchitectures in TiZr-based alloys

P. Liaw, B. Wei, Shijian Zheng, 2022, Science advances.

Strength and plasticity of lamellar vs. fibrous eutectic Mg-Al nanocomposites: An in-situ microcompression study

B. Wei, Kaisheng Ming, D. Xie, 2021 .

Cooperative effect of Cr and Al elements on passivation enhancement of eutectic high-entropy alloy AlCoCrFeNi2.1 with precipitates

Shijian Zheng, Kaisheng Ming, Yuning Wang, 2022, Journal of Materials Science & Technology.

Precipitation strengthening of ductile Cr15Fe20Co35Ni20Mo10 alloys

Kaisheng Ming, Jian Wang, X. Bi, 2017 .

Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates

Kaisheng Ming, Jian Wang, X. Bi, 2018 .

Ordering suppression and excellent ductility in soft-magnetic Fe-6.5 wt%Si sheet by Hf addition

Kaisheng Ming, X. Bi, Youxing Yu, 2018, Journal of Alloys and Compounds.

Microstructures and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 alloys

Kaisheng Ming, Jian Wang, X. Bi, 2017 .

Amorphous Bands Induced by Low Temperature Tension in a Non-Equiatomic CrMnFeCoNi Alloy

Wenjun Lu, Zhiming Li, Kaisheng Ming, 2019, Acta Materialia.

High-temperature strength-coercivity balance in a FeCo-based soft magnetic alloy via magnetic nanoprecipitates

Shijian Zheng, Kaisheng Ming, X. Bi, 2021 .

Nano-sized precipitation arising from partial substitution of Mo for Cr in FeCo-2V-0.5Cr alloy and its role in creep resistance

Kaisheng Ming, X. Bi, Hai-chen Wu, 2017 .

Improvement of the creep resistance of FeCo–2V alloy arising from a small addition of Cr

Kaisheng Ming, X. Bi, Hai-chen Wu, 2016 .

Tailoring planar slip to achieve pure metal-like ductility in body-centred-cubic multi-principal element alloys

Lu Wang, Benpeng Wang, Liang Wang, 2023, Nature Materials.

Dynamically reversible shear transformations in a CrMnFeCoNi high-entropy alloy at cryogenic temperature

Shijian Zheng, P. Jiang, Kaisheng Ming, 2022, Acta Materialia.

Understanding the microstructure refinement and mechanical strengthening of dual-phase high entropy alloy during ultrasonic shot peening

Yanxiong Liu, Kaisheng Ming, Jiahao Zhao, 2023, Materials & Design.

Tailoring Mechanical and Electrochemical Properties of the Cr15Fe20Co35Ni20Mo10 High-Entropy Alloy via the Competition between Recrystallization and Precipitation Processes

Jing Wang, Shijian Zheng, Kaisheng Ming, 2022, Coatings.

Highly open one-dimensional PtNi architectures with subnanometer walls as efficient catalysts for alcohol electrooxidation

K. Jiang, Kaixiang Lei, Kaisheng Ming, 2023, International Journal of Hydrogen Energy.

Dependence of Plastic Stability on 3D Interface Layer in Nanolaminated Materials

Shijian Zheng, Q. An, Kaisheng Ming, 2022, Acta Metallurgica Sinica (English Letters).

Intermediate Temperature Fatigue Induced Precipitation and Associated Corrosion in CrMnFeCoNi High Entropy Alloy

Jing Wang, Shijian Zheng, Kaisheng Ming, 2023, Acta Metallurgica Sinica.

Combined strengthening from nanoprecipitates, stacking faults and nano-twins enables a strong and ductile medium-entropy alloy

Kaisheng Ming, Bo Li, Kang Tu, 2023, Materials Science and Engineering: A.

Strength and plasticity of amorphous silicon oxycarbide

D. Lucca, M. Nastasi, Kaisheng Ming, 2019, Journal of Nuclear Materials.

Optimizing strength-ductility of laser powder bed fusion-fabricated Ti–6Al–4V via twinning and phase transformation dominated interface engineering

Shijian Zheng, Kaisheng Ming, Suyun He, 2023, Materials Science and Engineering: A.

Extra-ductile and strong tin bronze alloy via high-density intragranular ultra-nano precipitation with minimal lattice misfit

Kaisheng Ming, Xiaohua Chen, Zidong Wang, 2023, Scripta Materialia.