Y. Milman

发表

Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio

J. Eckert, A. Slipenyuk, V. Kuprin, 2006 .

Segregation effects as a possible mechanism for strengthening in metallic glasses

Y. Milman, Yu.V. Milman, S. Pan, 1991 .

Effect of plastic deformation and high pressure working on the structure and microhardness of metallic glasses

A. Rachek, Y. Milman, E. Koba, 1994 .

Strengthening of metallic glasses after high pressure working and low temperature annealing

Y. Milman, I. Timofeeva, E. Koba, 1994 .

Characteristic temperature of deformation of crystalline materials

Y. Milman, V. Trefilov, I. Gridneva, 1984 .

Mechanical properties of sintered materials. III. Cold brittleness of sintered materials

Y. Milman, V. Trefilov, R. Ivashchenko, 1991 .

Mechanical properties of sintered materials. II. Effect of porosity on the ductility of sintered alloys

Y. Milman, R. Ivashchenko, N. Zakharova, 1991 .

The mechanical properties of sintered materials. I. The strength properties of sintered materials

Y. Milman, 1991 .

Effect of temperature on the strength characteristics of zirconium carbide

Y. Milman, V. Trefilov, I. Gridneva, 1976 .

New Light-weight Eutectic Alloys Based on L12 Cubic Aluminum Intermetallics with Enhanced Heat Resistance

Y. Milman, N. M. Mordovets’, N. Poryadchenko, 2006 .

Formation of periodic microstructures involving the L12 phase in eutectic Al–Ti–Cr alloys

Y. Milman, M. Karpets, N. M. Mordovets’, 2003 .

Low and high temperature hardness of WC-6 wt%Co alloys

S. Luyckx, Y. Milman, S. Chugunova, 1997 .

The anomalous behavior of Al-Cu-Fe quasicrystal during nanoindentation

Y. Milman, S. Dub, D. Lotsko, 2001 .

Quasicrystalline Materials. Structure and Mechanical Properties

Y. Milman, A. Bilous, S. Dub, 2001 .

Temperature dependence of hardness in silicon–carbide ceramics with different porosity

Y. Milman, W. Lojkowski, T. Chudoba, 1999 .

Physics of Hardness of High-Melting Compounds

Y. Milman, 1999 .

STM Study of Microindentations on Oriented Metallic Single Crystals

Y. Milman, L. M. Brown, N. Stelmashenko, 1993 .

The resistance of silicon carbide to static and impact local loading

Y. Milman, I. Timofeeva, S. Chugunova, 2001 .

Indentation of materials as a new method of micromechanical testing

Y. Milman, 1999 .

Microindentations on W and Mo oriented single crystals: An STM study

Y. Milman, Yu.V. Milman, M. G. Walls, 1993 .

Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis

D. Miracle, Y. Milman, S. I. Chugunova, 2001 .

Construction of Stess-Strain Curves for Brittle Materials by Indentation in a Wide Temperature Range

Y. Milman, I. Gridneva, A. Golubenko, 2007 .

The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M processed AlCuMn/SiCp MMC

D. Miracle, J. Spowart, A. Slipenyuk, 2004 .

Impact of Deformation Twinning on the Mechanical Properties of B.C.C.-Lattice-Based Alloys

Y. Milman, I. Goncharova, 2017 .

Design of New Cast Aluminium Materials Using Properties of Monovariant Eutectic Transformation L ⇄ α-Al + Mg2Si

Y. Milman, O. Barabash, N. Korzhova, 2002 .

The influence of Zr alloying on the structure and properties of Al 3 Ti

D. Miracle, Y. Milman, O. Senkov, 2003 .

Structure and Mechanical Behaviour of Al-Sc Alloys

Y. Milman, 2006 .

Scandium Effect on Increasing Mechanical Properties of Aluminum Alloys

Y. Milman, 2006 .

High-Strength Aluminum Alloys

Y. Milman, 2004 .

Analysis of Dislocation Mobility under Concentrated Loads at Indentations of Single Crystals

Y. Milman, V. Trefilov, I. Gridneva, 1979 .

Structure and mechanical properties of iron subjected to surface severe plastic deformation by friction: I. Structure formation

Y. Milman, A. Byakova, A. Yurkova, 2010 .

Physics of deformation and fracture at impact loading and penetration

Y. Milman, V. Goncharuk, I. Goncharova, 2006 .

Plasticity characteristic obtained through hardness measurement

B. Galanov, Y. Milman, Yu.V. Milman, 1993 .

On plastic deformation mechanisms of WC-15 wt% Co alloys at 1000 °C

N. Sacks, S. Luyckx, Y. Milman, 2009 .

Mechanical properties of single-crystal lanthanum hexaboride with local loading

Y. Paderno, Y. Milman, I. Gridneva, 1990 .

Elevated temperature aluminum alloys produced by water atomization

Y. Milman, A. Krajnikov, A. Sameljuk, 2008 .

On the Mechanical Properties of Crystals with Covalent Bond

Y. Milman, V. Trefilov, I. Gridneva, 1969 .

Determination of New Plasticity Characteristic of Alloys at Mechanical Compression and Tensile Tests and the Influence of Structural Factors on Plasticity

B. Galanov, Y. Milman, I. Goncharova, 2022, Solid State Phenomena.

A Nanoindentation Study of Magnetron Co-Sputtered Nanocrystalline Ternary Nitride Coatings

R. Wuhrer, Y. Milman, W. Yeung, 2006 .

Phase transition in diamond‐structure crystals during hardness measurements

V. I. Trefilov, Y. Milman, Yu.V. Milman, 1972 .

Structure features of the eutectic alloys of borides with the d- and f-transition metals

Y. Paderno, V. Paderno, V. Filippov, 1992 .

Structure and mechanical properties of iron subjected to surface severe plastic deformation by attrition: II. Mechanical properties of nano- and submicrocrystalline iron

Y. Milman, A. Byakova, A. Yurkova, 2010 .

Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc

D. Miracle, Y. Milman, O. Senkov, 2002 .

New Opportunities to Determine the Rate of Wear of Materials at Friction by the Indentation Data

D. Lesyk, Y. Milman, B. Mordyuk, 2020 .

Application of the Improved Inclusion Core Model of the Indentation Process for the Determination of Mechanical Properties of Materials

B. Galanov, Y. Milman, I. Goncharova, 2017 .

Indentation size effect in nanohardness

Y. Milman, S. Dub, А. А. Golubenko, 2011 .

Plasticity at Absolute Zero as a Fundamental Characteristic of Dislocation Properties

Y. Milman, I. Goncharova, S. Chugunova, 2014 .

An approach to optimal design of storage parameters in databases

Y. Milman, Y. Milman, 1977, CACM.

Influence of temperature, grain size and cobalt content on the hardness of WC–Co alloys

S. Luyckx, Y. Milman, I. Northrop, 1999 .

Application of the Plasticity Characteristic Determined by the Indentation Technique for Evaluation of Mechanical Properties of Coatings: I. Specific Features of the Test Method Procedure

Y. Milman, A. Byakova, A. Vlasov, 2004 .

Mechanical properties of quasicrystalline Al-Cu-Fe coatings with submicron-sized grains

Y. Milman, S. Dub, A. Ustinov, 2007 .

Plasticity characteristic obtained by indentation

Y. Milman, 2008 .

Deformation and rupture of crystals with covalent interatomic bonds

Y. Milman, O. Grigoriev, V. Trefilov, 1988 .

Tribological properties of the surface of railway tracks, studied by indentation technique

Y. Milman, H. Fecht, W. Lojkowski, 2005 .

The transition from elastic to plastic behaviour in an Al-Cu-Fe quasicrystal studied by cyclic nanoindentation

Y. Milman, S. Dub, N. Novikov, 2002 .

Plasticity of Materials Determined by the Indentation Method

Y. Milman, I. Goncharova, S. Chugunova, 2018, Uspehi Fiziki Metallov.

Consolidation of Al-Cu-Fe Powders with Quasicrystalline Components by Using High Quasihydrostatic Pressures

Y. Milman, I. Timofeeva, O. Bykov, 2004 .

Structure and High-Temperature Properties of the Alloyed Quasicrystalline Al-Cu-Fe Powders and Thermal-Sprayed Coatings from Them

A. L. Borisova, Y. Milman, D. Lotsko, 2006 .

Diffraction ' in-situ ’ study of Al-Cu-FeX quasicrystalline powders for thermal-sprayed coatings

Y. Milman, M. Karpets, 2005 .

Mechanical and Corrosion Properties of Intermetallics Based on Aluminum

V. Kuprin, Y. Milman, S. Chugunova, 2022, Materials Science.

Structural features of vacuum-deposited high-hardness chromium coatings

Y. Milman, R. Ivashchenko, N. Zakharova, 1993 .

Physicomechanical properties and failure of detonation coatings

Y. Milman, R. Ivashchenko, O. V. Ivashchenko, 1987 .

The Role of Plastic Deformation in the Process of Powder Sintering

Y. Milman, Alexander N. Slipenyuk, 2006 .

Role of plastic deformation in sintering covalent crystals (review)

Y. Milman, V. Trefilov, I. Gridneva, 1995 .

The Influence of Thermo-Plastic Deformation on the Structure and Mechanical Properties of Powder Metallurgy Materials

Y. Milman, 1999 .

The Influence of Directed Alloying and Thermomechanical Treatment on the Structure and Mechanical Properties of High-Purity Chromium, Molybdenum and Tungsten

Y. Milman, 1995 .

Characteristic Temperature of Deformation of Materials and Cold Brittleness of BCC Metals and Ceramics

Y. Milman, 1991 .

'Sc Effect' of Improving Mechanical Properties in Aluminium Alloys

Y. Milman, D. Lotsko, O. Sirko, 2000 .

On the deformation mechanisms in metallic glasses

Y. Milman, D. Kozyrev, 2014, Steel in Translation.

On the cracks self-healing mechanism at ductile mode cutting of silicon

A. Kovalchenko, Y. Milman, Andriy Kovalchenko, 2014 .