Cunsheng Zhang

发表

Reviewing the anaerobic digestion of food waste for biogas production

T. Tan, J. Baeyens, Haijia Su, 2014 .

Influence of fluid dynamics on anaerobic digestion of food waste for biogas production

S. Huo, Cunsheng Zhang, Fengping Wang, 2017, Environmental technology.

Valorization of food waste for cost-effective reducing sugar recovery in a two-stage enzymatic hydrolysis platform

Yanyan Su, Yufei Tian, Yifeng Zhang, 2020 .

The anaerobic co-digestion of food waste and cattle manure.

T. Tan, Haijia Su, Gang Xiao, 2013, Bioresource technology.

Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train

Guoqun Zhao, Yanjin Guan, Hui Liu, 2011 .

Design of a Multihole Porthole Die for Aluminum Tube Extrusion

Guoqun Zhao, Yanjin Guan, P. Li, 2012 .

Batch and semi-continuous anaerobic digestion of food waste in a dual solid-liquid system.

T. Tan, Haijia Su, Cunsheng Zhang, 2013, Bioresource technology.

Biomass production of carbohydrate-rich filamentous microalgae coupled with treatment and nutrients recovery from acrylonitrile butadiene styrene based wastewater: Synergistic enhancement with low carbon dioxide supply strategy.

S. Huo, X. Zan, Cunsheng Zhang, 2022, Bioresource technology.

Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds

Guoqun Zhao, Cunsheng Zhang, Junquan Yu, 2017 .

Numerical Simulation and Die Optimal Design of a Complex Section Thin-Walled Aluminum Profile Extrusion

Guoqun Zhao, Hao Wang, Cunsheng Zhang, 2010 .

Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2012 .

Effect of extrusion stem speed on extrusion process for a hollow aluminum profile

Guoqun Zhao, Cunsheng Zhang, Fujun Kou, 2012 .

Application and analysis of spread die and flat container in the extrusion of a large-size, hollow, and flat-wide aluminum alloy profile

Guoqun Zhao, Cunsheng Zhang, Dong Wang, 2018 .

Numerical Investigation of Temperature and Forming Rate Effect on AA5086 Warm Formability

Guoqun Zhao, Cunsheng Zhang, Hao Chen, 2011 .

Immobilization of Clostridium kluyveri on wheat straw to alleviate ammonia inhibition during chain elongation for n-caproate production.

I. Angelidaki, Panagiotis Tsapekos, Yifeng Zhang, 2019, Environment international.

Effects of ultrasonic treatment on the maturation of Zhenjiang vinegar.

Haile Ma, Tingting Li, Cunsheng Zhang, 2017, Ultrasonics sonochemistry.

Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies

Guoqun Zhao, Cunsheng Zhang, Junquan Yu, 2017 .

Optimisation design of aluminium radiator extrusion die using response surface method

Guoqun Zhao, Yanjin Guan, Cunsheng Zhang, 2011 .

Effects of Welding Chamber Step on Extrusion Process of a Complex Hollow Profile

Guoqun Zhao, Jiangwei Liu, Cunsheng Zhang, 2010 .

Effects of Multi-Step Welding Chamber on Extrusion Product Quality and Die Strength

Guoqun Zhao, Cunsheng Zhang, Hao Chen, 2010 .

Effect of Ultrasound on Alkali Extraction Protein from Rice Dreg Flour

Haile Ma, Cunsheng Zhang, Shujun Li, 2017 .

Live Steam-Pretreatment and Anaerobic Digestion of Waste Activated Sludge

T. Tan, Haijia Su, Cunsheng Zhang, 2013 .

A preliminary study on polysaccharide extraction, purification, and antioxidant properties of sugar-rich filamentous microalgae Tribonema minus

Haile Ma, Jing Chen, Mostafa E. Elshobary, 2022, Journal of Applied Phycology.

The integration of through-thickness normal stress and friction stress in the M-K model to improve the accuracy of predicted FLCs

Guoqun Zhao, L. Chen, Guangchun Wang, 2019, International Journal of Plasticity.

Theoretical and numerical study of strain rate influence on AA5083 formability

D. Guines, E. Ragneau, Cunsheng Zhang, 2009 .

Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions

Guoqun Zhao, Cunsheng Zhang, Xiaoxue Chen, 2020 .

Microstructure characterization and corrosion behavior of hollow ZK60 Mg profile containing longitudinal welds

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021, Corrosion Science.

Solving 2D Poisson-type equations using meshless SPH method

Yanjin Guan, L. Shuai, Cunsheng Zhang, 2019, Results in Physics.

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p+TiB2p)/6061Al hybrid composite

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2022, Materials & Design.

Numerical and experimental investigation on thermo-mechanical behavior during transient extrusion process of high-strength 7 × × × aluminum alloy profile

Guoqun Zhao, Cunsheng Zhang, C. L. Wang, 2016 .

Mixotrophic Chlorella sp. UJ-3 cultivation in the typical anaerobic fermentation effluents.

Ling Xu, S. Huo, Cunsheng Zhang, 2018, Bioresource technology.

Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar

Guoqun Zhao, Cunsheng Zhang, Xinwu Ma, 2020, Materials & Design.

Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion

Guoqun Zhao, Yuqiang Li, Cunsheng Zhang, 2018, Journal of Alloys and Compounds.

Joining of 1060/6063 aluminum alloys based on porthole die extrusion process

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2017 .

Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation

Guoqun Zhao, Xiebin Wang, Cunsheng Zhang, 2019, Journal of Alloys and Compounds.

Investigation on Effects of Die Orifice Layout on Three-Hole Porthole Extrusion of Aluminum Alloy 6063 Tubes

Guoqun Zhao, Yanjin Guan, Cunsheng Zhang, 2013, Journal of Materials Engineering and Performance.

Improvement in mechanical properties of Al-Zn-Mg alloy by applying electric pulse during hot extrusion

Guoqun Zhao, Cunsheng Zhang, X. Chu, 2020, Journal of Materials Research and Technology.

Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2019, Journal of Materials Processing Technology.

Correlation between homogenization treatment and subsequent hot extrusion of Al–Mg–Si alloy

Guoqun Zhao, Cunsheng Zhang, Junquan Yu, 2019, Journal of Materials Science.

Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate

Guoqun Zhao, Cunsheng Zhang, Yuying He, 2019, Materials & Design.

Microstructure evolution of AZ91 alloy during hot extrusion process with various ram velocity

Guoqun Zhao, Cunsheng Zhang, Jixue Zhou, 2018 .

Crystal plasticity prediction of texture evolution during helical extrusion process of aluminium alloys under three-dimensional deformation path

Guoqun Zhao, Cunsheng Zhang, Kai Zhang, 2020 .

Modified layered double hydroxides nanocomposites with the polyoxyethylene sulfate

Cunsheng Zhang, J. Ling, Q. Yang, 2005 .

Strengthening mechanism and anisotropy of mechanical properties of Si3N4p/Al-Mg-Si composites fabricated by sintering and extrusion

Guoqun Zhao, Cunsheng Zhang, Xianlian Zhang, 2021, Materials & Design.

Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2019, Journal of Materials Research and Technology.

Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195

Guoqun Zhao, Cunsheng Zhang, Xiaoxue Chen, 2019, Journal of Alloys and Compounds.

Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging

Guoqun Zhao, Cunsheng Zhang, Lu Sun, 2020 .

Biocatalytic gateway to convert glycerol into 3-hydroxypropionic acid in waste-based biorefineries: Fundamentals, limitations, and potential research strategies.

Arthur J. Ragauskas, H. Zabed, P. F. Rupani, 2022, Biotechnology advances.

Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis

Guoqun Zhao, Yanjin Guan, Cunsheng Zhang, 2011, The International Journal of Advanced Manufacturing Technology.

Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process

Guoqun Zhao, Cunsheng Zhang, Lu Sun, 2020 .

Constitutive equation and processing maps of an Al–Mg–Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2016 .

Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition

Guoqun Zhao, Xing Lu, Cunsheng Zhang, 2016, Journal of materials engineering and performance (Print).

Pretreatment of vinegar residue and anaerobic sludge for enhanced hydrogen and methane production in the two-stage anaerobic system

Haile Ma, Cunsheng Zhang, Zhenbin Wang, 2015 .

Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2017 .

Automatic optimization design of a feeder extrusion die with response surface methodology and mesh deformation technique

Ping Lu, Shan Yang, Cunsheng Zhang, 2017 .

Multiobjective optimization design of porthole extrusion die using Pareto-based genetic algorithm

Hao Chen, Cunsheng Zhang, Guoqun Zhao, 2013 .

One-time determination of 20 material parameters in a strain-compensated constitutive model and its application in extrusion for an Al-Zn-Mg thin-walled profile

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2019, Thin-Walled Structures.

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Cunsheng Zhang, Liang Chen, Zhigang Li, 2021, Materials Characterization.

Effect of stress-aging treatment on the mechanical and corrosion properties of Al−Zn−Mg−Cu alloy

Guoqun Zhao, Guannan Chu, Cunsheng Zhang, 2022, Materials Science and Engineering: A.

Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021, Journal of Alloys and Compounds.

Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021 .

Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: A comparative study

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2020 .

Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2020 .

Effects of single- and multi-stage solid solution treatments on microstructure and properties of as-extruded AA7055 helical profile

Enze Bao, Cunsheng Zhang, Liang Chen, 2021, Transactions of Nonferrous Metals Society of China.

Aging precipitation and its effects on mechanical properties of TiB2 particulate reinforced 7075Al composite

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2022, Materials Science and Engineering: A.

Microstructural evolution and its effect on mechanical properties of spray deposited 2195 alloy during porthole die extrusion process

Guoqun Zhao, Cunsheng Zhang, Xiaoxue Chen, 2019, Vacuum.

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2022, International Journal of Plasticity.

Mechanical properties and microstructural evolution of the spray formed 2195 Al-Li alloy extruded sheet at warm temperatures

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2022, Journal of Materials Research and Technology.

Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization

Guoqun Zhao, Cunsheng Zhang, Xinwu Ma, 2021 .

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Guoqun Zhao, Cunsheng Zhang, S. Cui, 2021, Materials Science and Engineering: A.

Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate

Guoqun Zhao, Hao Zhang, Qing-You Zhang, 2019, Materials Science and Engineering: A.

Influence of isothermal and non-isothermal aging treatments on microstructure and properties of Al-Zn-Mg alloy helical profile

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2020 .

Co-extrusion of dissimilar AA6063/AA7075 by porthole die at various temperatures

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2018, Journal of Alloys and Compounds.

Magnetic/electric field intervention on oil-rich filamentous algae production in the application of acrylonitrile butadiene styrene based wastewater treatment.

S. Huo, X. Zan, Cunsheng Zhang, 2022, Bioresource technology.

Bacterial intervention on the growth, nutrient removal and lipid production of filamentous oleaginous microalgae Tribonema sp.

Haile Ma, Ling Xu, Mostafa E. Elshobary, 2020 .

Improvement of betalains stability extracted from red dragon fruit peel by ultrasound-assisted microencapsulation with maltodextrin

W. Qu, Xianghui Qi, C. Brennan, 2021, Ultrasonics sonochemistry.

Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021, Composites Part B: Engineering.

Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021 .

Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld

Guoqun Zhao, Cunsheng Zhang, Lu Sun, 2022, Journal of Magnesium and Alloys.

Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures

Guoqun Zhao, Xing Lu, Shouqiu Tang, 2018 .

Microstructure, mechanical properties and welding quality evaluation of longitudinal welds in hollow magnesium alloy profiles extruded at different ram speeds

Guoqun Zhao, Xing Lu, Cunsheng Zhang, 2019, Materials Characterization.

Effect of extrusion speeds on the microstructure, texture and mechanical properties of high-speed extrudable Mg Zn Sn Mn Ca alloy

Guoqun Zhao, Xing Lu, Cunsheng Zhang, 2018, Vacuum.

Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2018, Journal of Materials Processing Technology.

Microstructure and Mechanical Properties of the As-Cast and As-Homogenized Mg-Zn-Sn-Mn-Ca Alloy Fabricated by Semicontinuous Casting

Guoqun Zhao, Xing Lu, Cunsheng Zhang, 2018, Materials.

Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets

Guoqun Zhao, Cunsheng Zhang, Zongshen Wang, 2018 .

Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die

Guoqun Zhao, Cunsheng Zhang, X. Chu, 2020 .

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation

Guoqun Zhao, Cunsheng Zhang, Lu Sun, 2020 .

Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling

Guoqun Zhao, Cunsheng Zhang, Junquan Yu, 2019, Journal of Alloys and Compounds.

Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process

Guoqun Zhao, Cunsheng Zhang, Xingrong Chu, 2018, Journal of Materials Processing Technology.

Effect of Process Parameters on Die Wear Behavior of Aluminum Alloy Rod Extrusion

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2013 .

Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2022, Journal of Materials Processing Technology.

Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2020 .

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021, Composites Part B: Engineering.

Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile

Guoqun Zhao, Cunsheng Zhang, Xianlian Zhang, 2022, Materials Science and Engineering: A.

Effect of ultrasonication on the metabolome and transcriptome profile changes in the fermentation of Ganoderma lucidum.

Cunsheng Zhang, Li-ping Liu, B. Mintah, 2021, Microbiological research.

Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2019 .

Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2017 .

Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al–Cu–Mg composites with various Mg contents

Cunsheng Zhang, Liang Chen, Jun Lin, 2021 .

Investigation on microstructure and mechanical properties of in-situ TiB2/Al–Cu–Mg composite profile fabricated by porthole die extrusion

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2020, Materials Science and Engineering: A.

Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling

Guoqun Zhao, Cunsheng Zhang, X. Chu, 2020, Materials Characterization.

Multi-objective optimization and experimental investigation on hot extruded plate of high strength Al-Zn-Mg alloy

Guoqun Zhao, Yuqiang Li, Cunsheng Zhang, 2020 .

Investigation on microstructure and mechanical properties of Al–5.50Zn–2.35Mg–1.36Cu alloy fabricated by hot extrusion process

Guoqun Zhao, Yuqiang Li, Cunsheng Zhang, 2019, Journal of Materials Research.

Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties

Guoqun Zhao, Cunsheng Zhang, X. Chu, 2020 .

The identification of improved Johnson-Cook constitutive model in a wide range of temperature and its application in predicting FLCs of Al–Mg–Li sheet

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2020 .

Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process

Guoqun Zhao, Hao Zhang, Cunsheng Zhang, 2020, Journal of Materials Processing Technology.

Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2019, Results in Physics.

Evolution of transverse weld during porthole extrusion of AA7N01 hollow profile

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2017 .

State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process

Xing Lu, Cunsheng Zhang, Yanjin Guan, 2016 .

Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021, Journal of Materials Processing Technology.

Experimental and numerical investigations on transverse weld of hollow aluminum profile during porthole extrusion process

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2017 .

An Investigation of Die Wear Behavior During Aluminum Alloy 7075 Tube Extrusion

Guoqun Zhao, Peng Li, Cunsheng Zhang, 2013 .

Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2022, Materials & Design.

An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2021, Journal of Materials Engineering and Performance.

The determination of friction coefficient in Nakazima test and its application in predicting FLCs with modified M-K model

Cunsheng Zhang, Yubao Wang, 2020, IOP Conference Series: Materials Science and Engineering.

Theoretical and numerical study of strain rate influence on AA 5083 formability

D. Guines, E. Ragneau, Cunsheng Zhang, 2017 .

Effects of Temperature and Strain Rate on the Forming Limit Curves of AA5086 Sheet

Guoqun Zhao, D. Guines, Cunsheng Zhang, 2014 .

Micro-/nano-scale interface structure and mechanical characteristics of the Al/Ti composite bar produced by a novel continuously-extruded technique

Z. Liu, Guoqun Zhao, Cunsheng Zhang, 2023, Materials & Design.

Modification of wheat straw to improve the caproate production in a cell immobilized system.

J. Baeyens, Yan Liu, Cunsheng Zhang, 2021, Bioresource technology.

Impact of particle size of cell carrier on caproate fermentation in a cell immobilized system: focusing on the improvement of caproate production in batch and continuous operation modes

Yan Liu, H. Zabed, Xianghui Qi, 2023, Chemical Engineering Journal.

Efficient caproate production from ethanol and acetate in open culture system through reinforcement of chain elongation process

J. Baeyens, Yan Liu, Haijia Su, 2023, Journal of Cleaner Production.

Sequential fermentation of food waste in an integrated system to improve n-caproate production

J. Baeyens, Cunsheng Zhang, Li Yang, 2021 .

Optimization of the Cell Immobilization-Based Chain-Elongation Process for Efficient n-Caproate Production

Yanyan Su, S. Huo, Cunsheng Zhang, 2021 .

Influence of organic load on biogas production and response of microbial community in anaerobic digestion of food waste

Ze-hua Liu, S. Huo, Cunsheng Zhang, 2022, International Journal of Hydrogen Energy.

Improvement of Biohydrogen Production from Dark Fermentation by Cocultures and Activated Carbon Immobilization

Cunsheng Zhang, Cunsheng Zhang, X. Kang, 2017 .

Numerical simulation and metal flow analysis of hot extrusion process for a complex hollow aluminum profile

Hao Chen, Cunsheng Zhang, Guoqun Zhao, 2012 .

Moving least squares particle hydrodynamics method for Burgers' equation

Jun Lin, Liang Chen, Cunsheng Zhang, 2019, Appl. Math. Comput..

Formability behavior of Al/steel MIG arc brazed-fusion welded joint

Cunsheng Zhang, G. Qin, Peihao Geng, 2019, Journal of Materials Processing Technology.

Optimizing mixotrophic cultivation of oil-rich Tribonema minus using volatile fatty acids and glycerin: A promising approach for pH-controlling and enhancing lipid productivity

Mostafa E. Elshobary, S. Huo, Cunsheng Zhang, 2023, Journal of Cleaner Production.

Optimal Design of Second-Step Welding Chamber for a Condenser Tube Extrusion Die Based on the Response Surface Method and the Genetic Algorithm

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2013 .

Identification of friction coefficients and strain-compensated Arrhenius-type constitutive model by a two-stage inverse analysis technique

Guoqun Zhao, Cunsheng Zhang, Anjiang Gao, 2015 .

Dedicated linear – Voce model and its application in investigating temperature and strain rate effects on sheet formability of aluminum alloys

Guoqun Zhao, Cunsheng Zhang, Dominique Guines, 2015 .

Suppressing abnormal grain growth and switching precipitation behaviors in ZK60 Mg profile by inducing pre-tension

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2023, Journal of Materials Science & Technology.

Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections

Peng Li, Cunsheng Zhang, Guoqun Zhao, 2015 .

Deformation mechanism of as-extruded Al–Cu–Li alloy with heterogeneous fiber structure

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2023, Materials & Design.

Optimization of biaxial tensile specimen shape from numerical investigations

D. Guines, E. Ragneau, Cunsheng Zhang, 2008 .

Study on solid bonding behavior of AZ31 Mg alloy during porthole die extrusion process

Guoqun Zhao, Cunsheng Zhang, Jixue Zhou, 2017 .

Strengthening and toughening mechanisms of tailored Al/Al-TiB2 laminated composites fabricated by hot press sintering process

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2023, Journal of Materials Processing Technology.

Experimental and numerical study on effect of forming rate on AA5086 sheet formability

Cunsheng Zhang, Dominique Guines, Lionel Leotoing, 2010 .

Identification of modified Swift constitutive model and its application in predicting FLDs of AA5083 at elevated temperatures

Cunsheng Zhang, Fang Xie, Yubao Wang, 2018 .

Ac ce pt ed M an us cr ip t Experimental and numerical study on effect of forming rate on AA 5086 sheet formability

D. Guines, E. Ragneau, Cunsheng Zhang, 2017 .

Low cycle fatigue behavior and fatigue life prediction of 2195 Al-Li alloy at warm temperatures

Cunsheng Zhang, Guodong Zhao, Zijie Meng, 2023, Transactions of Nonferrous Metals Society of China.

Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2023, Journal of Materials Research and Technology.

Hot compressive deformation behavior and microstructural evolution of the spray-formed 1420 Al–Li alloy

Cunsheng Zhang, Kuizhao Wang, Guoqun Zhao, 2023, Journal of Materials Research and Technology.

Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling

Cunsheng Zhang, Zinan Cheng, Kuizhao Wang, 2024, International Journal of Plasticity.

Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections

Guoqun Zhao, Yanjin Guan, Cunsheng Zhang, 2014, The International Journal of Advanced Manufacturing Technology.

Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy

Cunsheng Zhang, Guoqun Zhao, Zijie Meng, 2024, Composites Part B: Engineering.