J. Khaki

发表

Manufacturing of aluminum foam sandwich panels: comparison of a novel method with two different conventional methods

A. Nabavi, J. Khaki, J. V. Khaki, 2011 .

Prediction of mechanical properties of a warm compacted molybdenum prealloy using artificial neural network and adaptive neuro-fuzzy models

J. Khaki, M. Zare, 2012 .

Fabrication and Wear Behavior Investigation of the Carbon/Epoxy Composites Based on Wood Using Artificial Neural Networks

Seyed Mojtaba Zebarjad, J. Khaki, H. Vafaeenezhad, 2011 .

Fast Prepared Ni-Al2O3 Nanocomposite Through Solution Combustion Synthesis

J. Khaki, H. Nasiri, M. H. Sabzevar, 2015 .

Role of fuel/oxidizer ratio on the synthesis conditions of Cu–Al2O3 nanocomposite prepared through solution combustion synthesis

Seyed Mojtaba Zebarjad, J. Khaki, H. Nasiri, 2012 .

Evaluation of process behavior and crystallite specifications of mechano-chemically synthesized WC–Al2O3 nano-composites

F. Saito, J. Khaki, Qingsheng Zhang, 2014 .

Conversion of W2C to WC phase during mechano-chemical synthesis of nano-size WC–Al2O3 powder using WO3–2Al–(1+x)C mixtures

F. Saito, J. Khaki, Qingsheng Zhang, 2013 .

Effect of polyethylene glycol and acetic acid on morphology of nanoparticle Hydroxyapatite synthesized by sol-gel Kh

Seyed Mojtaba Zebarjad, J. Khaki, .. yousefi, 2012 .

Influences of mechanical activation and heating rate on reaction processes in combustion synthesis of NiAl-Al2O3 composites

J. Khaki, A. Kiani-Rashid, M. Kashefi, 2019, Powder Technology.

Investigation of in-situ synthesis and consolidation of NiAl–Al2O3 composites by reactive spark plasma sintering process using mechanically activated reaction

J. Khaki, A. Kiani-Rashid, M. Kashefi, 2014 .

Quantitative evaluation of ambient O2 interference during solution combustion synthesis process:considering iron nitrate – fuel system

J. Khaki, S. Mollazadeh, H. Aali, 2019, Ceramics International.

Single-phase magnetite with high saturation magnetization synthesized via modified solution combustion synthesis procedure

J. Khaki, S. Mollazadeh, H. Aali, 2018, Ceramics International.

Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

J. Khaki, R. Parvizi, M. Moayed, 2012, Metallurgical and Materials Transactions B.

Fabrication of nanocrystalline TiC coating on AISI D2 steel substrate via high-energy mechanical alloying of Ti and C

Farhad Saba, J. Khaki, M. H. Sabzevar, 2016 .

Carburising behaviour of low carbon steel with nanocrystalline surface layer induced by ball milling

J. Khaki, S. Kahrobaee, A. Dolatmoradi, 2012 .

THE EFFECT OF GRINDING TIME ON THE SPECIFIC SURFACE AREA DURING INTENSIVE GRINDING OF MINERAL POWDERS

J. Khaki, A. Zakeri, A. Emami, 2009 .

Fabrication of Fe–TiC–Al2O3 composites on the surface of steel using a TiO2–Al–C–Fe combustion reaction induced by gas tungsten arc cladding

J. Khaki, M. Sharifitabar, M. H. Sabzevar, 2016, International Journal of Minerals, Metallurgy, and Materials.

Microstructure and wear resistance of in-situ TiC–Al2O3 particles reinforced Fe-based coatings produced by gas tungsten arc cladding

J. Khaki, M. Sharifitabar, M. H. Sabzevar, 2016 .

Effect of alumina percentage on size and superparamagnetic properties of Ni-Al2O3 nanocomposite synthesized by solution combustion

J. Khaki, N. Shahtahmassebi, H. Nasiri, 2016 .

Effects of Fe additions on self propagating high temperature synthesis characteristics of TiO2–Al–C system

J. Khaki, M. Sharifitabar, M. H. Sabzevar, 2014 .

Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile

J. Eckert, S. Scudino, H. Eshghi, 2013 .

Formation of nanocrystalline h-AlN during mechanochemical decomposition of melamine in the presence of metallic aluminum

H. Eshghi, J. Khaki, S. Rounaghi, 2012 .

Effect of alkaline electrolysis conditions on current efficiency and morphology of zinc powder

M. Mojtahedi, J. Khaki, M. Goodarzi, 2009 .