C. Kang

发表

The effect of the blank holding force on formability in hot deep drawing of boron steel considering heat transfer phenomena and friction coefficient by simulation and experimental investigation

Y. Ouyang, M. Lee, J. H. Moon, 2012 .

Study on Flow Pattern According to Rotor Design Parameter of Sewage Sludge Solid Fuel Crusher

C. Kang, Il-kab Jeong, Dong-Myung Lee, 2020, Journal of Electrical Engineering & Technology.

Vacuum Die Casting Process and Simulation for Manufacturing 0.8 mm-Thick Aluminum Plate with Four Maze Shapes

C. Kang, C. Jin, C. Jang, 2015 .

Study on dimensional and corrosion properties of thixoformed A356 and AA7075 aluminum bipolar plates for proton exchange membrane fuel cells

C. Kang, A. Bolouri, 2014 .

Microstructure and mechanical properties of AM50 alloy according to thickness and forming condition of the products by a high pressure die-casting process

C. Kang, J. Park, 2013 .

A study on the S/W application for a riser design process for fabricating axisymmetric large offshore structures by using a sand casting process

C. Kang, H. Seo, P. Seo, 2019, International Journal of Naval Architecture and Ocean Engineering.

Effects of die shape and injection conditions proposed with numerical integration design on liquid segregation and mechanical properties in semi-solid die casting process

C. Kang, P. Seo, D. U. Kim, 2006 .

Development, Microstructure, and Mechanical Properties of ALDC6-10Si Alloy for Spider Arm Component

C. Kang, J. Babu, S. Bae, 2021, Journal of Materials Engineering and Performance.

Correlation between solid fraction and tensile properties of semisolid RAP processed aluminum alloys

C. Kang, A. Bolouri, 2012 .

Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements

C. Kang, J. Babu, Hanjong Kim, 2013 .

FINITE ELEMENT ANALYSIS OF THERMAL NANOINDENTATION PROCESS AND ITS EXPERIMENTAL VERIFICATION

C. Kang, Hyun-Jun Oh, Eun-Kyung Lee, 2008 .

Effects of chamber shapes of porthole die on elastic deformation and extrusion process in condenser tube extrusion

Chung-Gil Kang, Byung-Min Kim, C. Kang, 2005 .

The effect of different forming parameters on the depth of bipolar-plate channels in static- and dynamic-load stamping

Min June Kim, C. Kang, C. Jin, 2015 .

Effect of stamping load variation on deformation behaviour of stainless steel thin plate with microchannel

C. Kang, J. Koo, Y. Jeon, 2013 .

Fabrication of aluminum 1050 micro-channel proton exchange membrane fuel cell bipolar plate using rubber-pad-forming process

Yong‐Tae Kim, Y. T. Kim, C. Kang, 2013 .

Effect of process parameters and laminating methods on spring-back in V-bending of CFRP/CR340 hybrid composites

M. Lee, C. Kang, Su-Won Choi, 2016 .

Micromechanical solidification heat transfer and initial strain estimation in the fabrication process of particles-reinforced aluminum composites

C. Kang, Y. Seo, 1997 .

Performance and characteristics of titanium nitride, chromium nitride, multi-coated stainless steel 304 bipolar plates fabricated through a rubber forming process

C. Kang, C. Jin, K. Lee, 2015 .

Fabrication of metal-matrix composites by the die-casting technique and the evaluation of their mechanical properties

C. Kang, K. Yun, 1996 .

A study on Linear Pattern Fabrication of Plate-type Polymer by Using Thermal Nano Imprint Lithography Process

S. Youn, C. Kang, C. Lee, 2009 .

Rheoforging of thin case for IT devices with optimal process parameters and new type die design

C. Kang, H. Seo, A. Bolouri, 2014 .

Simulation and Fabrication of Automobile Parts in Semi-Solid Process

C. Kang, H.H. Kim, 2011 .

Numerical Analysis of Two-Phase Thermal Flow for Rheology Forging Process

C. Kang, D. E. Seol, C. Kang, 2006 .

Effects of hot extrusion through a curved die on the mechanical properties of SiCp/Al composites fabricated by melt-stirring

C. Kang, Y. Seo, 1999 .

The effect of strain rate on macroscopic behavior in the compression forming of semi-solid aluminum alloy

Jongung Choi, C. Kang, C. G. Kang, 1999 .

Die design method for thin plates by indirect rheo-casting process and effect of die cavity friction and punch speed on microstructures and mechanical properties

C. Kang, C. Jin, C. Jang, 2015 .

Computer Aided Simulation of the Rheology Forging Process for Aluminum Alloys and its Experimental Investigation

C. Kang, J. Bae, P. Seo, 2007 .

The effect of the solid fraction on rheological behavior of wrought aluminum alloys in incremental compression experiments with a closed die

C. Kang, B. Kim, B. Kim, 2007 .

Deformation behavior of wrought aluminum alloys in incremental compression experiment with a closed die

C. Kang, B. Kim, W. Kim, 2007 .

The effect of test specimen size and strain-rate on liquid segregation in deformation behavior of mushy state material

S. Youn, C. Kang, P. Seo, 2002 .

Improvement of the liquid segregation phenomena of semisolid aluminum alloys by the multistage strain rate control in the compression test

C. Kang, K. Jung, 2001 .

Reheating process for thixoforging of metal matrix composites fabricated by induction heating and the mechanical stirring process

C. Kang, Y. Jeon, 2003 .

Investigation of optimal lamination condition of CFRTP by compression molding method and a comparison of mechanical properties with CFRTS

Min Sik Lee, C. Kang, H. Seo, 2020 .

Investigation of thin boron steel sheet formability in hot deep-drawing processes according to process parameters

M. Lee, C. Kang, Seung-cheol Baeck, 2012 .

Induction heating of semisolid billet and control of globular microstructure to prevent coarsening phenomena

Y. Moon, C. Kang, H. Jung, 2000 .

Horizontal reheating of aluminum alloys and semi-solid casting for a near net shape compressor component

S. Youn, C. Kang, Young-Ho Jung, 2003 .

Fabrication of titanium bipolar plates by rubber forming and performance of single cell using TiN-coated titanium bipolar plates

C. Kang, C. Jin, M. Jeong, 2014 .

A Hot Extrusion Process without Sintering by Applying MWCNTs/Al6061 Composites

Long Jiang, C. Kang, H. Seo, 2018 .

Effect of Compression Process of MWCNT-Reinforced Al6061 Powder on Densification Characteristics and Its Mechanical Properties

Long Jiang, C. Kang, H. Seo, 2017 .

Evaluation of Precipitation Hardening Characteristics of Rheology-Forged Al 7075 Aluminum Alloy Using Nano- or Microindentation and Atomic Force Microscopy

C. Kang, H. H. Kim, C. Kang, 2010 .

Effect on Blank Holding Force on Blank Deformation at Direct and Indirect Hot Deep Drawings of Boron Steel Sheets

C. Kang, H. Seo, C. Jin, 2018, Metals.

The effect process parameters on epoxy flow behavior and formability with CR340/CFRP composites by different laminating in deep drawing process

Min Sik Lee, C. Kang, O. Lim, 2016 .

Micro-crack in zinc coating layer on boron steel sheet in hot deep drawing process

C. Kang, H. Seok, Jae-Chul Mun, 2015 .

Maskless patterning of borosilicate glass surface using nanoindentation-induced etch-hillock phenomena

S. Youn, C. Kang, 2005 .

Comparative study on mechanical properties of CR340/CFRP composites through three point bending test by using theoretical and experimental methods

Min Sik Lee, C. Kang, H. Seo, 2016, International Journal of Precision Engineering and Manufacturing-Green Technology.

An estimation of three-dimensional finite element crystal geometry model for the strength prediction of particle-reinforced metal matrix composites

S. Youn, J. Lee, C. Kang, 2005 .

Study of the mechanical and workability properties of extruded aluminium (Al6061) based composites reinforced with MWCNTs

C. H. Lee, C. Kang, J. Babu, 2020 .

Nano and macromechanical properties of aluminium (A356) based hybrid composites reinforced with multiwall carbon nanotubes/alumina fiber

C. Kang, A. Srinivasan, J. Babu, 2017 .

Enhanced corrosion resistance and fuel cell performance of Al1050 bipolar plate coated with TiN/Ti double layer

H. Chun, Tae-Gyung Jeong, Hannah Song, 2013 .

Vacuum Die Casting Mold Design of Fuel Cell Bipolar Plate using Die Filling Simulation and Experimental Verification

C. Kang, C. Jin, C. Jang, 2012 .

Fabrication by vacuum die casting and simulation of aluminum bipolar plates with micro-channels on both sides for proton exchange membrane (PEM) fuel cells

C. Kang, C. Jin, 2012 .

Improving channel depth of stainless steel bipolar plate in fuel cell using process parameters of stamping

C. Kang, C. Jin, W. Park, 2016, The International Journal of Advanced Manufacturing Technology.

Improving channel depth of stainless steel bipolar plate in fuel cell using process parameters of stamping

C. Kang, C. Jin, W. Park, 2016 .

Effect of progressive forming process and processing variables on the formability of aluminium bipolar plate with microchannel

C. Kang, Y. Jeon, H. Kwon, 2012, The International Journal of Advanced Manufacturing Technology.

Fabrication of Thin Plate of Semisolid Material using Slope Plate Process and Development of Fabrication Apparatus

C. Kang, C. Jin, J. Bae, 2012 .

Fabrication Process of Rheology Material Thin Plate Using Vacuum Low Pressure Die-casting Process with Electromagnetic Stirring

C. Kang, C. Jin, J. Bae, 2012 .

Thermal elasto-plastic finite element modelling of the deformation behaviour of metal matrix composites considering interfacial strength

C. Kang, Y. Seo, 1998, Metals and Materials.

The effect of applied pressure on particle-dispersion characteristics and mechanical properties in melt-stirring squeeze-cast SiCp/Al composites

C. Kang, Y. Seo, 1995 .

Comparison of collision test results for center-pillar reinforcements with TWB and CR420/CFRP hybrid composite materials using experimental and theoretical methods

M. Lee, C. Kang, H. Seo, 2017 .

Evaluation of microstructure and mechanical properties by using nano/micro-indentation and nanoscratch during aging treatment of rheo-forged Al 6061 alloy

Sunja Cho, C. Kang, Hanjong Kim, 2008 .

Finite element simulation of die design for hot extrusion process of Al/Cu clad composite and its experimental investigation

Young-Ho Jung, H. Kwon, C. Kang, 2002 .

The effect of heat treatment on the mechanical properties of a low carbon steel (0.1%) for offshore structural application

C. Kang, A. Bolouri, Sung-Soo Kang, 2012 .

Microstructural characteristics and mechanical properties of hypo-eutectic and hyper-eutectic Al–Si alloys in the semi-solid forming process

C. Kang, P. Seo, H. Jung, 2001 .

Fabrication and Properties of Magnesium (AM50)-based Hybrid Composites with Graphite Nanofiber and Alumina Short Fiber

G. Unnikrishnan, J.S.S. Babu, C. Kang, 2010 .

Effect of Electromagnetic Stirring Conditions on Grain Size Characteristic of Wrought Aluminum for Rheo-forging

C. Kang, S. Oh, J. Bae, 2008 .

Thixoforming A356 Aluminum Bipolar Plates at High Solid Fractions

C. Kang, A. Bolouri, C. Jang, 2013, Metallurgical and Materials Transactions B.

The Effect of Blank Holding Force on Thickness Variation in Simultaneous Sheet forming process with Circle and Rectangle Shape of AZ31B Magnesium Sheet

H. H. Kim, Chung-Gil Kang, K. T. Kwon, 2009 .

A study on solutions for avoiding liquid segregation phenomena in thixoforming process: Part II. Net shape manufacturing of automotive scroll component

C. Kang, H. Jung, H. K. Jung, 2001 .

Thin-Plate Forming by Thixo- and Rheoforging

C. Kang, A. Bolouri, C. Jin, 2014 .

FEA study on nanodeformation behaviors of amorphous silicon and borosilicate considering tip geometry for pit array fabrication

S. Youn, C. Kang, 2005 .

The effect of die shape on the hot extrudability and mechanical properties of 6061 Al/Al2O3 composites

C. Kang, Nam-Hun Kim, B. Kim, 2000 .

Hot Extrusion of A356 Aluminum Metal Matrix Composite with Carbon Nanotube/Al2O3 Hybrid Reinforcement

C. Kang, J. Babu, H. H. Kim, 2014, Metallurgical and Materials Transactions A.

Tribological and Nano-Scratch Properties of Aluminum (A356) Based Hybrid Composites Reinforced with MWCNTs/Alumina Fiber

C. Kang, A. Srinivasan, J. Babu, 2020, Metals and Materials International.

The effect of solid fraction and indirect forging pressure on mechanical properties of wrought aluminum alloy fabricated by electromagnetic stirring

Sun Min Lee, C. Kang, S. Lee, 2009 .

Rheological forging process of A6061 wrought aluminum alloy with controlled liquid fraction by electromagnetic stirring system

Sun Min Lee, C. Kang, B. Kim, 2009 .

Development of a new rheology forming process with a vertical-type sleeve with electromagnetic stirring

Chung-Gil Kang, Sang-Mae Lee, C. Kang, 2008 .

The grain size control of A356 aluminum alloy by horizontal electromagnetic stirring for rheology forging

C. Kang, Byung-Min Kim, J. Bae, 2007 .

Characteristics of thixoformed A356 aluminum thin plates with microchannels

C. Kang, A. Bolouri, 2013 .

Evaluation of the Mechanical Properties of Carbon Nanotube (CNT) Reinforced Aluminum (6061) Composites Using Closed Die Forging

C. Kang, J. Babu, Jun Park, 2020 .

Cold forgeability improvement of SNCM220 steel through heat treatment

C. Kang, Jae-Chul Mun, 2015 .

Cold forgeability improvement of SNCM220 steel through heat treatment

C. Kang, Jae-Chul Mun, 2015, International Journal of Precision Engineering and Manufacturing.

Vacuum-assisted rheo-forging process of A356 aluminum alloys

C. Kang, H. H. Kim, 2008 .

Tensile properties and microstructural characteristics of indirect rheoformed A356 aluminum alloy

C. Kang, A. Bolouri, J. Bae, 2013 .

Mechanical properties and their microstructure evaluation in the thixoforming process of semi-solid aluminum alloys

C. Kang, W. G Cho, C. G. Kang, 2000 .

The characteristics of grain size controlled microstructure and mechanical properties of Al-Si alloy by thixocasting and rheocasting process

C. Kang, P. Seo, D. U. Kim, 2005 .

A study on semisolid processing of A356 aluminum alloy through vacuum-assisted electromagnetic stirring

C. Kang, A. Bolouri, I. Chung, 2012 .

A study on semisolid processing of A356 aluminum alloy through vacuum-assisted electromagnetic stirring

C. Kang, A. Bolouri, I. Chung, 2011, The International Journal of Advanced Manufacturing Technology.

A study on quantitative formability assessment of rheological materials based on the microstructural characterization with a moderate control of the process

C. Kang, Hanjong Kim, H. Jung, 2007 .

Microstructural stress concentration: An important role in grain refinement of rheocasting structure

Z. Yang, C. Kang, Z. Q. Hu, 2005 .

Determination of forming procedure by numerical analysis and investigation of mechanical properties of steel/CFRP hybrid composites with complicated shapes

M. Lee, C. Kang, 2017 .

Mathematical model for the twin roll type strip continuous casting of magnesium alloy considering thermal flow phenomena

Chung-Gil Kang, J. W. Bae, C. Kang, 2007 .

Coarsening of equiaxed microstructure in the semisolid state of aluminum 7075 alloy through SIMA processing

C. Kang, A. Bolouri, M. Shahmiri, 2012, Journal of Materials Science.

A study on reheating characteristics for thixo die casting process with electromagnetic stirring and extruded aluminum alloys and their mechanical properties

C. Kang, S. M. Lee, P. Seo, 2009 .

The effect of forging pressure on liquid segregation during direct rheoforging process of wrought aluminium alloys fabricated by electromagnetic stirring

C. Kang, S. Lee, 2008 .

The effect of raw material fabrication process on microstructural characteristics in reheating process for semi-solid forming

C. Kang, P. Seo, 2005 .

Evolution of the rheocasting structure of A356 alloy investigated by large-scale crystal orientation observation

Z. Yang, C. Kang, P. Seo, 2005 .

Finite element analysis considering fracture strain of sheath material and die lubricant in extrusion process of Al/Cu clad composites and its experimental investigation

Chung-Gil Kang, C. Kang, H. C. Kwon, 2002 .

Die life considering the deviation of the preheating billet temperature in hot forging process

Chung-Gil Kang, D. H. Kim, Byung-Min Kim, 2005 .

Assessment of die material manufactured using the lost foam casting process for hot press forming

N. Kim, C. Kang, Y. Jeon, 2012 .

Die design optimization for axisymmetric hot extrusion of metal matrix composites

Chung-Gil Kang, Byung-Min Kim, C. Kang, 2001 .

Characterization of age-hardening behavior of eutectic region in squeeze-cast A356-T5 alloy using nanoindenter and atomic force microscope

S. Youn, C. Kang, 2006 .

Formability evaluation of stainless steel bipolar plate considering draft angle of die and process parameters by rubber forming

C. Kang, C. Jin, M. Jeong, 2014 .

Reheating process of cast and wrought aluminum alloys for thixoforging and their globularization mechanism

C. Kang, H. Jung, 2000 .

Evaluation of mechanical characteristics of the plate-type polymer hyperfine pit pattern by the nanoindentation process

Chung-Gil Kang, C. Kang, Eun-Kyung Lee, 2010 .

Effect of solid fraction on formability and mechanical properties in a vertical-type rheo squeeze-casting process

C. Kang, S. Lee, 2011 .

Effect of sheet-metal thickness and hardness on the life cycle and sliding force of a novel ultraslim spring unit for a semi-automatic sliding mechanism used in IT devices

Hyung-Yoon Seo, Chung-Gil Kang, Jong-Deok Kim, 2012 .

Mechanical Properties and Microstructure of Thin Plates of A6061 Wrought Aluminum Alloy Using Rheology Forging Process with Electromagnetic Stirring

C. Kang, A. Bolouri, C. Jin, 2014, Metallurgical and Materials Transactions B.

Fabrication of Aluminum Bipolar Plates by Semi‐solid Forging Process and Performance Test of TiN Coated Aluminum Bipolar Plates

Chung-Gil Kang, C. Kang, C. Jin, 2014 .

The Fabrication of Automobile Components by Applying Electromagnetic Stirring in Semisolid Process

C. Kang, H. H. Kim, 2011 .

Forging process of medium-pressure-type rheology materials fabricated with electromagnetic stirrer

C. Kang, S. Oh, 2008 .

Grain Size Control of Wrought Aluminum Alloy for Rheology Forging by Electromagnetic Stirring and Its Mechanical Properties

C. Kang, B. Kim, S. Oh, 2006 .

A Study on Rheology Forming Process of Al-7%Si Alloy with Electromagnetic Application

C. Kang, P. Seo, KoJaeHong, 2006 .

Induction heating process of an Al–Si aluminum alloy for semi-solid die casting and its resulting microstructure

C. Kang, H. Jung, 2002 .

Study on the effects of the compression ratio and mushy zone heating on the thixotropic microstructure of AA 7075 aluminum alloy via SIMA process

C. Kang, A. Bolouri, M. Shahmiri, 2011 .

An induction heating process with coil design and solutions avoiding coarsening phenomena of Al-6 Pct Si-3 Pct Cu-0.3 Pct Mg alloy for thixoforming

Chung-Gil Kang, H. K. Jung, C. Kang, 1999 .

Coupled thermal deformation analysis considering strip tension and with/without strip crown in coiling process of cold rolled strip

C. Kang, Young-Ho Jung, Gyoo-Taek Lee, 2002 .

The effect of injection velocity on liquid segregation and mechanical properties in arm part fabricated by semi-solid die casting process

Chung-Gil Kang, P. K. Seo, C. Kang, 2006 .

Thermal fluid/solidification analysis of automobile part by horizontal squeeze casting process and experimental evaluation

Chung-Gil Kang, P. K. Seo, S. W. Youn, 2004 .

Thixoforging of Wrought Aluminum Thin Plates with Microchannels

C. Kang, A. Bolouri, 2014, Metallurgical and Materials Transactions A.

A new process proposal for continuous fabrication of rheological material by rotational barrel with stirring screw and its microstructural evaluation

C. Kang, S. Lee, P. Seo, 2009 .

A finite-element analysis on the upsetting process of semi-solid aluminum material

Jun-Seok Yoon, C. Kang, C. G. Kang, 1997 .

The effect of globular microstructure size on the mechanical properties in reheating process of aluminum alloys

S. Youn, C. Kang, P. Seo, 2004 .

Semisolid forming of thin plates with microscale features

C. Kang, A. Bolouri, C. Jin, 2014 .

Computational simulation for optimizing the thermal hyperfine patterning process and its experimental verification

Chung-Gil Kang, Yong-Phil Jeon, C. Kang, 2014 .

Computational simulation for optimizing the thermal hyperfine patterning process and its experimental verification

C. Kang, Y. Jeon, Gyu-wan Hwang, 2014, International Journal of Precision Engineering and Manufacturing.

Thixo diecasting process for fabrication of thin-type component with wrought aluminum alloys and its formability limitation

C. Kang, P. Seo, Y. Jeon, 2005 .

Processing of Low-Carbon Cast Steels for Offshore Structural Applications

C. Kang, A. Bolouri, Tae-Won Kim, 2013 .

Effect of forming conditions on mechanical properties of rheoformed thin plates with microchannels using electromagnetic stirring

C. Kang, A. Bolouri, C. Jin, 2014 .

Data base construction on mechanical properties of thixoforged aluminum parts and their microstructure evaluation

S. Youn, C. Kang, P. Seo, 2005 .

Comparative study of direct and indirect forging processes for rheological material of A356 aluminium alloy

C. Kang, S. Lee, 2011 .

The Effect of Velocity Control Method on the Part Characteristic in Semi-Solid Die Casting

Y. Son, C. Kang, P. Seo, 2002 .

An investigation of flow characteristics considering the effect of viscosity variation in the thixoforming process

Chung-Gil Kang, Nam-Kyung Kim, C. Kang, 2000 .

Effect of Current Input Method and Solid Fraction on the Roundness and Mechanical Properties in Semi-Solid Processing of Aluminum Materials

M. Lee, C. Kang, Wonjun Lee, 2022, Metals.

Hybrid Preform for Metal Matrix Composites: Processing and Characterization

J.S.S. Babu, C. Kang, K. P. Nair, 2006 .

Experimental investigation for rheology forming process of Al–7% Si aluminum alloy with electromagnetic system

C. Kang, J. Bae, Tae-Won Kim, 2007 .

Die design by filling analysis of semi-solid injection forging process and their experimental investigation

Chung-Gil Kang, Deuk-Woo Lee, P. K. Seo, 2004 .

Grain Size Control of Semisolid A356 Alloy Manufactured by Electromagnetic Stirring

C. Kang, Z.Yang, P.K.Seo, 2009 .

A SOLIDIFICATION ANALYSIS ON CENTRIFUGAL CASTING OF METAL MATRIX COMPOSITES CONTAINING GRAPHITE PARTICLES

P. Rohatgi, C. Kang, G. S. Cole, 1994 .

Model experiments for the determination of the heat-transfer coefficient and transition thermal analysis in the direct rolling process

C. Kang, C. G. Kang, Y. D. Kim, 1998 .

A coupled solidification analysis of materials and cooling roller in direct rolling process

C. G. Kang, Yung-Jin Kim, S. W. Lee, 1997 .

Investigation of formability and surface micro-crack in hot deep drawing by using laser-welded blank of Al–Si and Zn-coated boron steel

Min Sik Lee, C. Kang, J. Moon, 2014 .

Maskless pattern fabrication on Si(100) surface by using nanoindenter with KOH wet etching

S. Youn, C. Kang, 2004 .

Transient thermal analysis of solidification in a centrifugal casting for composite materials containing particle segregation

P. Rohatgi, C. Kang, 1996 .

Effect of Impregnation Process Parameters on the Mechanical Properties of Carbon Fabric Reinforced Thermoplastic Composites

C. Kang, C. Jin, D. Kim, 2020 .

Effect of plasma current on surface defects of plasma-MIG welding in cryogenic aluminum alloys

C. Kang, Hee-Keun Lee, Sang-hyeon Park, 2015 .

A study on mechanical properties of laser-welded blank of a boron sheet steel by laser ablation variable of Al-Si coating layer

C. Kang, P. Seo, J. Moon, 2013 .

Simulation and Experimental Investigation of Die Design for the Fabrication of Spider Arm Component by AlSi10Mg2.7 Alloy

C. Kang, P. Seo, J. Babu, 2021, International Journal of Metalcasting.

A study of nanoscratch experiments of the silicon and borosilicate in air

S. Youn, C. Kang, 2004 .

A study of die design of semi-solid die casting according to gate shape and solid fraction

Chung-Gil Kang, Byung-Min Kim, Sun Min Lee, 2008 .

Effect of Solid Fraction and Pressure on Microstructure and Mechanical Properties and Reduction in Liquid Segregation in the Thixo-Die-Casting Process with Al-7 Pct Si Alloy

C. Kang, S. Lee, 2008 .

Numerical integration design process to development of suspension parts by semi-solid die casting process

Chung-Gil Kang, P. K. Seo, H. C. Kim, 2007 .

Mold structure design and casting simulation of the high-pressure die casting for aluminum automotive clutch housing manufacturing

Chung-Gil Kang, Jong-Deok Kim, Seong Il Jeong, 2015 .

Nanomechanical properties of magnesium-based hybrid composites with graphite nanofiber and alumina short fiber

C. Kang, J. Babu, 2011 .

Molecular Dynamics Simulation of Nano-Deformation Behavior of the Grain-Size Controlled Rheology Material

J. W. Kim, S. Youn, C. Kang, 2005 .

The Prediction of Interfacial Heat Transfer Coefficient According to Contact Time and Pressure in Forging and Casting Die Materials for the Hot Press Forming

C. Kang, N. H. Kim, 2010 .

Die design for a center pillar part by process analysis of hot stamping and its experimental verification

Byung-Min Kim, Chung-Gil Kang, Ji-Tae Kim, 2012 .

Experimental Investigation on the Deformation Behavior of Inconel 625 Superalloy at High Temperatures

C. Kang, C. Jin, Hyung-Yoon Seo, 2019, Metals.

Prediction of springback during indirect hot press forming through tensile test with simultaneous cooling

Chung-Gil Kang, June Sun Hwang, Jung Hwan Moon, 2013 .

Effect of nanoscratch conditions on both deformation behavior and wet-etching characteristics of silicon (100) surface

Chung-Gil Kang, S. Youn, C. Kang, 2006 .

Investigating the micro-structures of A356 semi-solids based on electromagnetic stirring currents and crucible materials

C. Kang, C. Jin, M. Heo, 2020, Journal of Mechanical Science and Technology.

Evaluation of mechanical properties of porous 6061 alloys fabricated by the powder compression and induction heating process

Chung-Gil Kang, S. Youn, C. Kang, 2004 .

Fabrication of stainless steel bipolar plates for fuel cells using dynamic loads for the stamping process and performance evaluation of a single cell

C. Kang, C. Jin, J. Koo, 2014 .

Fabrication Process and Forming Analysis of Fuel Cell Bipolar Plate by Injection Condition of Vacuum Die Casting

C. Kang, C. Jin, C. Jang, 2011 .

Fabrication Process of Aluminum Bipolar Plate for Fuel Cell using Vacuum Die Casting

C. Kang, C. Jin, 2011 .

Semi-solid die casting process with three steps die system

P. K. Seo, K. J. Park, C. G. Kang, 2004 .

Effect of the Number of CFRP Prepregs and Roughness at the Bonding Area on the Spring-Back and Flexural Strength of Hybrid Composites of CFRP Combined with CR980

C. Kang, C. Jin, J. Hwang, 2019, Metals.

Effect of Surface Roughness on the Bonding Strength and Spring-Back of a CFRP/CR980 Hybrid Composite

Min Sik Lee, C. Kang, C. Jin, 2018, Metals.

Effects of cell size on compression and bending strength of aluminum-foamed material by complex stirring in induction heating

C. Kang, S. Lee, Y. Jeon, 2009 .

Comparison of formabilities of stainless steel 316L bipolar plates using static and dynamic load stamping

Chul-Kyu Jin, Chung-Gil Kang, Min June Kim, 2014 .

Fabrication process analysis and experimental verification for aluminum bipolar plates in fuel cells by vacuum die-casting

C. Kang, C. Jin, 2011 .

Numerical analysis by new proposed coil design method in induction heating process for semi-solid forming and its experimental verification with globalization evaluation

P. K. Seo, C. Kang, C. G. Kang, 2003 .

A study on nano-deformation behavior of rheo-formed Al–Si alloy based on depth-sensing indentation with three-dimensional surface analysis

S. Youn, C. Kang, P. Seo, 2005 .

Effect of Current Input Method on A356 Microstructure in Electromagnetically Stirred Process

C. Kang, C. Jin, M. Heo, 2020, Metals.

An Experimental Investigation on Infiltration Limit and the Mechanical Properties of Al2O3 Short Fiber Reinforced Metal Matrix Composites Fabricated by Squeeze Casting

C. Kang, G. Ku, 1995 .

Numerical simulation of mold filling and deformation behavior in rheology forming process

C. Kang, J. Bae, 2008 .

Two-dimensional model for twin-roll continuous casting

Chung-Gil Kang, T. Saitoh, C. Kang, 1989 .

Development of non-lubricated die for magnesium sheet forming of car body part

J. Nam, C. Kang, S. Cha, 2014 .

Development of non-lubricated die for magnesium sheet forming of car body part

J. Nam, C. Kang, S. Cha, 2014, International Journal of Precision Engineering and Manufacturing.

The effect of the gate shape on the microstructural characteristic of the grain size of Al–Si alloy in the semi-solid die casting process

C. Kang, P. Seo, D. U. Kim, 2007 .

Effect of the Process Parameters on the Formability, Microstructure, and Mechanical Properties of Thin Plates Fabricated by Rheology Forging Process with Electromagnetic Stirring Method

C. Kang, C. Jin, C. Jang, 2014, Metallurgical and Materials Transactions B.

Semisolid forming process—numerical simulation and experimental study

Chung-Gil Kang, H. K. Jung, C. Kang, 2001 .

Design of a gate system and riser optimization for turbine housing and the experimentation and simulation of a sand casting process

C. Kang, C. Jin, Hyung-Yoon Seo, 2018, Advances in Mechanical Engineering.

Microstructural Characterization of Rheology Material Fabricated by Rotational Barrel Type

C. Kang, P. Seo, 2005 .

The Effect of the Gate Shape on the Microstructure of the Grain Size Controlled Material

C. Kang, Y. Jung, P. Seo, 2005 .

Heating System for Riser Size Minimizing in Sand Casting Process and Its Experimental Verification

C. Kang, C. Jin, Hyung-Yoon Seo, 2017 .

Mechanical characteristics evaluation of hollow shape part with metal matrix composites fabricated by thixoforging process

S. Youn, C. Kang, P. Seo, 2002 .

The effect of billets extruded by a curved and flat-face die on the semisolid characteristics and tensile properties of thixoformed products

C. Kang, A. Bolouri, Y. Jeon, 2014 .

The effect of billets extruded by a curved and flat-face die on the semisolid characteristics and tensile properties of thixoformed products

C. Kang, A. Bolouri, Y. Jeon, 2013, The International Journal of Advanced Manufacturing Technology.

The Effect of Applied Forging Pressure on Primary Structure Deformation in Rheology Forging Process With Solid Fraction Controlled A356 and AA2024 Alloys

C. Kang, S. Lee, Hanjong Kim, 2010 .

The effect of indirect forging pressure of wrought aluminium alloys on material properties by varying solid fraction using electromagnetic stirring

C. Kang, S. Lee, S. S. Kang, 2008 .

The effect of gate shape on the filling limitation in the semi-solid forging process and the mechanical properties of the products

C. Kang, P. Seo, 2003 .

Development of low-temperature high-strength integral steel castings for offshore construction by casting process engineering

C. Kang, Jae-Chul Mun, Tae-Won Kim, 2014 .

Prediction Defect of Automotive Components by Filling and Solidification Analysis

C. Kang, Suk-Kyu Lee, Dong-hun Lee, 2000 .

An experimental study on thixoforging of semi-solid materials and solutions for avoiding defects

C. Kang, W. Cho, 2001 .

Fabrication of aluminum 1050 micro-channel proton exchange membrane fuel cell bipolar plate using rubber-pad-forming process

Y. T. Kim, C. Kang, S. S. Lim, 2012, The International Journal of Advanced Manufacturing Technology.

Investigation of viscosity properties for rheology forming of AM50A magnesium alloy

S. Han, C. Kang, J. Sung, 2007 .

Fabrication of foamable precursors by powder compression and induction heating process

S. Youn, C. Kang, 2004 .

Development of rheology vacuum low-pressure die casting with electromagnetic stirrer and vacuum system

C. Kang, C. Jin, J. Bae, 2014 .

Thixoforming of an aluminum component with a die designed by process simulation

C. Kang, H. Jung, K. Jung, 2001 .

A study on a thixoforming process using the thixotropic behavior of an aluminum alloy with an equiaxed microstructure

C. Kang, H. Jung, H. K. Jung, 2000 .

The effect of process parameters on cell morphology in cellular aluminium alloy fabricated by powder compression and the induction heating process

S. Youn, C. Kang, S W Youn, 2003 .

Reheating process of metal matrix composites for thixoforming and their inductive coil design

S. Youn, C. Kang, P. Seo, 2002 .

Forging process analysis with arbitrary shape die in semi-solid material with high solid fraction

P. K. Seo, Chung-Gil Kang, M. D. Lim, 2003 .

Numerical visualization of viscosity in phase transformation forming process with controlled liquid fraction

C. Kang, P. Seo, M. Lim, 2004 .

Effect of applied pressure and heat treatment condition on microstructural characteristics and mechanical properties of the thixoforged 357 aluminum alloy

S. Youn, S. M. Park, C. Kang, 2004 .

Effect of gate shape and forging temperature on the mechanical properties in the injection forging process of semi-solid aluminum material

C. Kang, J. Choi, 1998 .

Effect of Extrusion on Fiber Orientation and Breakage of Aluminar Short Fiber Composites

C. Kang, S. S. Kang, 1994 .

Statistical Analysis of Tribological Properties of Mg(AM50)/GNF-Al2O3sf Hybrid Composites

M. Lee, C. Kang, J. Babu, 2023, Metals.

Effect of progressive forming process and processing variables on the formability of aluminium bipolar plate with microchannel

Chung-Gil Kang, Yong-Phil Jeon, C. Kang, 2013 .

Evaluation of the formability of a bipolar plate manufactured from aluminum alloy Al 1050 using the rubber pad forming process

Chung-Gil Kang, Yong-Phil Jeon, Yong‐Tae Kim, 2012 .

Formability of aluminium embossing sheets with controlled stamping machine for PEM fuel cell

C. Kang, H. Kwon, 2011 .

The surface characteristics of Al-7%Si aluminum alloy manufactured by thixo/rheoforming process through nanoindentation/atomic force microscopy

Sunja Cho, C. Kang, Sangjun Lee, 2008 .

Finite Element Analysis of Thixoforming Process with Arbitrary Shape Die

P. K. Seo, C. G. Kang, S. W. Youn, 2005 .

Maskless pattern fabrication on Pyrex 7740 glass surface by using nano-scratch with HF wet etching

Chung-Gil Kang, S. Youn, C. Kang, 2005 .

Effect of Process Parameters on Epoxy Flow Behavior and Formability with CR340/CFRP Composites by Different Laminating in Deep Drawing Process

M. Lee, C. Kang, O. Lim, 2014 .

Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer

M. Lee, C. Kang, J. Moon, 2014 .

Evaluation of Mechanical Characteristic of Laser-Welded Blank of a Boron Steel by Using Laser Ablation of Al-Si Coating Layer

Lee, C. Kang, J. Moon, 2011 .

Reduction in Liquid Segregation and Microstructure Improvement in a Semisolid Die Casting Process by Varying Injection Velocity

C. Kang, S. Lee, H. H. Kim, 2011 .

Computer‐assisted Rheo‐forging Processing of A356 Aluminum Alloys

C. Kang, H. H. Kim, 2010 .

A study on solutions for avoiding liquid segregation phenomena in thixoforming process: Part I. Constitutive modeling and finite element method simulations for die design

C. Kang, H. K. Jung, 2001 .