K. Shin

发表

A 250-mm-width, flexible, and continuous roll-to-roll slot-die coated carbon nanotube/silver nanowire film fabrication and a study on the effect of anti-reflective overcoat

Janghoon Park, K. Shin, Changwoo Lee, 2016 .

Analysis of adhesion strength of laminated copper layers in roll-to-roll lamination process

Janghoon Park, K. Shin, Jongsu Lee, 2015 .

Real-time tension control in a multi-stand rolling system

K. Shin, W. Hong, 1998 .

Roll-to-Roll Coating Technology and Its Applications: A Review

Kee-Hyun Shin, Changwoo Lee, Janghoon Park, 2016 .

Optimization of calendering process using Taguchi method to improve the performance of printed capacitor

Sang Hoon Lee, Kee-Hyun Shin, Sangyoon Lee, 2014 .

Flexible ultraviolet photodetectors with ZnO nanowire networks fabricated by large area controlled roll-to-roll processing

Janghoon Park, K. Shin, Jongsu Lee, 2016 .

Quantitative analysis of peel-off degree for printed electronics

Janghoon Park, K. Shin, Jongsu Lee, 2018 .

Strip tension control considering the thermal strain in multi-span systems with temperature change

K. Shin, J. Jang, G. Y. Kim, 2001 .

Statistical analysis on the effect of calendering process parameters on the geometry and conductivity of printed patterns

Sangyoon Lee, Kee-Hyun Shin, Ho Anh Duc Nguyen, 2013 .

A study on model development of the slot-die coating process through the statistical analysis

Janghoon Park, Jinwoo Seong, Hyunkyoo Kang, 2011, 2011 8th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI).

Roll-to-roll infrared and hot-air sintering of gravure-printed Ag layer based on in situ tension measuring and analysis

Janghoon Park, K. Shin, Hyunkyoo Kang, 2016 .

Novel Modeling of Correlation between Two-Dimensional Registers in Large-Area Multilayered Roll-to-Roll Printed Electronics

K. Shin, Changwoo Lee, Hyunkyoo Kang, 2011 .

Large-Area Coating of Previtamin D3 Based on Roll-to-Roll Processing

Janghoon Park, K. Shin, Jongsu Lee, 2019, Coatings.

NO2 Sensing Properties of Bead‐like TeO2 Nanostructures Fabricated Using Different O2 Flow Rates

Sun-Woo Choi, C. Jin, K. Shin, 2015 .

Characterization and gas sensing properties of bead-like ZnO using multi-walled carbon nanotube templates

Chang-wan Kim, Sun-Woo Choi, C. Jin, 2015 .

Multi-response optimization of R2R gravure printing using orthogonal array and principal component analysis as a weighting factor

Kee-Hyun Shin, Changwoo Lee, Ho Anh Duc Nguyen, 2017 .

Improvement of cross-machine directional thickness deviation for uniform pressure-sensitive adhesive layer in roll-to-roll slot-die coating process

Kee-Hyun Shin, Changwoo Lee, Janghoon Park, 2015 .

Improvement of cross-machine directional thickness deviation for uniform pressure-sensitive adhesive layer in roll-to-roll slot-die coating process

Janghoon Park, K. Shin, Changwoo Lee, 2015, International Journal of Precision Engineering and Manufacturing.

An Investigation of the Ink-Transfer Mechanism During the Printing Phase of High-Resolution Roll-to-Roll Gravure Printing

Kee-Hyun Shin, Changwoo Lee, Dongjin Lee, 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Roll-to-roll gravure printing of thick-film silver electrode micropatterns for flexible printed circuit board

Kee-Hyun Shin, Janghoon Park, Dongjin Lee, 2016, Journal of Coatings Technology and Research.

An approach for controlling printed line-width in high resolution roll-to-roll gravure printing

Kee-Hyun Shin, Chung Hwan Kim, Dongjin Lee, 2013 .

A study on the fault diagnosis of roller-shape using frequency analysis of tension signals and artificial neural networks based approach in a web transport system

Kee-Hyun Shin, Kyung-Mo Tahk, K. Shin, 2002 .

Analysis of dynamic thermal characteristic of register of roll-to-roll multi-layer printing systems

Jongsu Lee, Changwoo Lee, Kee-Hyun Shin, 2015 .

Dongjin Lee, Jongsu Lee, Janghoon Park, 2015 .

A Novel Method to Guarantee the Specified Thickness and Surface Roughness of the Roll-to-Roll Printed Patterns Using the Tension of a Moving Substrate

Changwan Kim, Changwoo Lee, Hyunkyoo Kang, 2010, Journal of Microelectromechanical Systems.

Smearing defects: a root cause of register measurement error in roll-to-roll additive manufacturing system

Jongsu Lee, Hoeryong Jung, Kee-Hyun Shin, 2018, The International Journal of Advanced Manufacturing Technology.

Optimization of printing conditions for microscale multiline printing in continuous roll-to-roll gravure printing

Jongsu Lee, Janghoon Park, Hakyung Jeong, 2016 .

Practical Design Guidelines for the Development of High-Precision Roll-to-Roll Slot-Die Coating Equipment and the Process

Jongsu Lee, Dongjin Lee, Jaemin Kim, 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Modeling and compensation of the machine directional register in roll-to-roll printing

Hyunkyoo Kang, Kee-Hyun Shin, Changwoo Lee, 2013 .

A study on tension behavior considering thermal effects in roll-to-roll E-printing

Hyunkyoo Kang, Kee-Hyun Shin, Changwoo Lee, 2010 .

Analysis of adhesion strength of laminated copper layers in roll-to-roll lamination process

Janghoon Park, K. Shin, Jongsu Lee, 2015, International Journal of Precision Engineering and Manufacturing.

Advanced taper tension method for the performance improvement of a roll-to-roll printing production line with a winding process

Hyunkyoo Kang, Changwoo Lee, Kee-Hyun Shin, 2012 .

A novel cross directional register modeling and feedforward control in multi-layer roll-to-roll printing

Hyunkyoo Kang, Kee-Hyun Shin, Changwoo Lee, 2010 .

Cross direction register modeling and control in a multi-layer gravure printing

Jae-Min Lee, Hyunkyoo Kang, Kee-Hyun Shin, 2010 .

A taper tension profile maker in a converting machine

Kee-Hyun Shin, Changwoo Lee, Jang Won Lee, 2008 .

A Study on the Optimal Taper Tension Control in a Roll to Roll Machine

Jangwon Lee, Changwoo Lee, Keehyun Shin, 2007, ICCSA.

Feedforward control of the lateral position of a moving web using system identification

Soon-Oh Kwon, Seung-Ho Song, Sang-Hoon Kim, 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

AUTO TAPER TENSION PROFILE MAKER IN A CONVERTING MACHINE by

K. Shin, Kwon, J. Lee, 2019 .

Two-Dimensional Register Modeling and Control in Multi-Layer Roll-To-Roll E-Printing Systems

Changwoo Lee, Hyunkyoo Kang, Kee-Hyun Shin, 2011 .

Online noncontact thickness measurement of printed conductive silver patterns in Roll-to-Roll gravure printing

Janghoon Park, Jinwoo Seong, Kee-Hyun Shin, 2015 .

Roll-to-Roll Coating Technology and Its Applications: A Review

Janghoon Park, K. Shin, Changwoo Lee, 2016, International Journal of Precision Engineering and Manufacturing.

Variable-gain control of longitudinal tension in a web transport system

K. N. Reid, K. H. Shin, K. Shin, 1991 .

Distributed Control of Tension in Multi-Span Web Transport Systems

Kee-Hyun Shin, K. Shin, 1991 .

Effect of nip force on ink transfer in high resolution roll-to-roll printing

Kee-Hyun Shin, Changwoo Lee, Ho Anh Duc Nguyen, 2015 .

Effect of nip force on ink transfer in high resolution roll-to-roll printing

K. Shin, Changwoo Lee, H. Nguyen, 2015, International Journal of Precision Engineering and Manufacturing.

Approach to optimizing printed conductive lines in high-resolution roll-to-roll gravure printing

Kee-Hyun Shin, Changwoo Lee, Ho Anh Duc Nguyen, 2017 .

R2R gravure and inkjet printed RF resonant tag

Terho Kololuoma, Sung-Lim Ko, Kee-Hyun Shin, 2011 .

Register mark measurement errors in high-precision roll-to-roll continuous systems: The effect of register mark geometry on measurement error

Jongsu Lee, Janghoon Park, Pekka Isto, 2016 .

Modeling and Matching Design of a Tension Controller Using Pendulum Dancer in Roll-to-Roll Systems

Hyunkyoo Kang, Keehyun Shin, Sang-Chul Kim, 2010, 2010 IEEE Industry Applications Society Annual Meeting.

A study on the tension estimator by using register error in a printing section of roll to roll e-printing systems

Hyunkyoo Kang, Changwoo Lee, Kee-Hyun Shin, 2009 .

Design of a register controller considering inherent characteristics of a roll-to-roll continuous manufacturing system

Jongsu Lee, Hyunkyoo Kang, Kee-Hyun Shin, 2019, The International Journal of Advanced Manufacturing Technology.

Design of a register controller considering inherent characteristics of a roll-to-roll continuous manufacturing system

K. Shin, Jongsu Lee, Hyunkyoo Kang, 2019, The International Journal of Advanced Manufacturing Technology.

Precise tension control of a dancer with a reduced-order observer for roll-to-roll manufacturing systems

Hyunkyoo Kang, Kee-Hyun Shin, K. Shin, 2018 .

Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system

Hyunkyoo Kang, Kee-Hyun Shin, Janghoon Park, 2016, Scientific Reports.

A mathematical model to predict surface roughness and pattern thickness in roll-to-roll gravure printed electronics

Kee-Hyun Shin, Changwoo Lee, Ho-anh-duc Nguyen, 2013 .

Online noncontact thickness measurement of printed conductive silver patterns in Roll-to-Roll gravure printing

Janghoon Park, K. Shin, J. Seong, 2015, International Journal of Precision Engineering and Manufacturing.

Noble Logic for Preventing Scratch on Roll-to-Roll Printed Layers in Noncontacting Transportation

Hyunkyoo Kang, Kee-Hyun Shin, Changwoo Lee, 2010 .

Optimized design for anti-reflection coating process in roll-to-roll slot-die coating system

Kee-Hyun Shin, Changwoo Lee, Janghoon Park, 2014 .

Smearing defects: a root cause of register measurement error in roll-to-roll additive manufacturing system

K. Shin, Jongsu Lee, Hoeryong Jung, 2018, The International Journal of Advanced Manufacturing Technology.

Multi-response optimization of R2R gravure printing using orthogonal array and principal component analysis as a weighting factor

K. Shin, Changwoo Lee, H. Nguyen, 2016, The International Journal of Advanced Manufacturing Technology.

Development of hybrid process for double-side flexible printed circuit boards using roll-to-roll gravure printing, via-hole printing, and electroless plating

Jongsu Lee, Janghoon Park, Kee-Hyun Shin, 2016 .

Development of hybrid process for double-side flexible printed circuit boards using roll-to-roll gravure printing, via-hole printing, and electroless plating

Janghoon Park, K. Shin, Jongsu Lee, 2015, The International Journal of Advanced Manufacturing Technology.

Effect of process parameters on fidelity of printed line width in high resolution roll-to-roll gravure printing

Kee-Hyun Shin, Dongjin Lee, Ho Anh Duc Nguyen, 2014 .