I. Lee

发表

Multi-material Additive Fabrication of a Carbon Nanotube-Based Flexible Tactile Sensor

Jung H. Cho, Chaima Fekiri, Chiyen Kim, 2022, International Journal of Precision Engineering and Manufacturing.

3-dimensional circuit device fabrication process using stereolithography and direct writing

Hae-yong Cho, S. T. Oh, I. Lee, 2015 .

Development of a Fused Deposition Modeling System for Low Melting Temperature Metal Alloys

J. Mireles, D. Espalin, R. Wicker, 2013 .

Fabrication of 3D-Printed Circuit Device using Direct-Write Technology

H. Kim, I. Lee, Haeyong Yun, 2016 .

Dispensing characteristics of conductive material for the flexible tactile sensor

In Hwan Lee, I. Lee, Sang-Gu Woo, 2013, 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013).

Development of rapid mask fabrication technology for micro-abrasive jet machining

Dong-Woo Cho, Hyun-Wook Kang, T. Ko, 2008, 2008 International Conference on Smart Manufacturing Application.

3D-Printable Carbon Nanotubes-Based Composite for Flexible Piezoresistive Sensors

Chaima Fekiri, H. Kim, I. Lee, 2020, Materials.

Improved resistance stability for tactile sensor fabrication and investigation of the dispensing parameters of a nanocomposite material

Chaima Fekiri, I. Lee, Ho-Chan Kim, 2019, Journal of Mechanical Science and Technology.

Optimal conditions of SU-8 mask for micro-abrasive jet machining of 3-D freeform brittle materials

T. Ko, I. Lee, Ho-Chan Kim, 2013 .

Development of micro-stereolithography technology using a UV lamp and optical fiber

Dong-Woo Cho, Tae Jo Ko, In Hwan Lee, 2009 .

Fabrication of 3D printed circuit device by using direct write technology

First A. Ho-chan Kim, Second B. Hea-yong Yun, Seung-gyu Lim Third C. Author, 2015, 2015 15th International Conference on Control, Automation and Systems (ICCAS).

Surface roughness for dispensing patterns in nozzle dispensing solid freeform technology

Hyun Jun Jung, In Hwan Lee, Hae Yong Cho, 2013 .

Surface roughness for dispensing patterns in nozzle dispensing solid freeform technology

I. Lee, H. Jung, Hae-Yong Cho, 2013, Journal of Mechanical Science and Technology.

A review on 3D printed smart devices for 4D printing

Ho-Chan Kim, Jae-Won Choi, In Hwan Lee, 2017 .

A review on 3D printed smart devices for 4D printing

Jae-Won Choi, H. Kim, I. Lee, 2017, International Journal of Precision Engineering and Manufacturing-Green Technology.

Development of a Photopolymer-based Flexible Tactile Sensor using Layered Fabrication and Direct Writing

K. Lee, I. Lee, Ho-Chan Kim, 2014 .

Design and Operation of 3D Printing Education Curriculum in Mechanical Engineering

Hae-Yong Cho, In Hwan Lee, Jung Min Shin, 2015 .

Effect of fabrication parameters on surface roughness of FDM parts

I. Lee, Ho-Chan Kim, Min Kyung Kim, 2018 .

3D tool path generation for micro-abrasive jet machining on 3D curved surface

Ho-Chan Kim, Tae Jo Ko, In Hwan Lee, 2013 .

Research for improved flexible tactile sensor sensitivity

Ho-Chan Kim, In Hwan Lee, Haeyong Yun, 2015 .

Research for improved flexible tactile sensor sensitivity

H. Kim, I. Lee, H. Yun, 2015, Journal of Mechanical Science and Technology.

Fabrication of a planar spiral antenna using direct writing technology

Min-Kyung Kim, In Hwan Lee, Hae Yong Cho, 2015 .

Direct 3D mask modeling for nonplanar workpieces in microabrasive jet machining

T. Ko, H. Kim, I. Lee, 2011, The International Journal of Advanced Manufacturing Technology.

Direct 3D mask modeling for nonplanar workpieces in microabrasive jet machining

Ho-Chan Kim, Tae Jo Ko, In Hwan Lee, 2012 .

3D tool path generation for micro-abrasive jet machining on 3D curved surface

T. Ko, H. Kim, I. Lee, 2013, International Journal of Precision Engineering and Manufacturing.

Fabrication of the Photo-Resist Mask onto 3D Non-Planar Wafer for Micro Abrasive Jet Machining

T. Ko, I. Lee, Ho-Chan Kim, 2012 .

Exposure Time Variation Method Using DMD for Microstereolithography

In-Hwan Lee, T. Ko, I. Lee, 2012 .

Photopolymer Solidification for Inclined Laser Exposure Conditions

J. Lim, I. Lee, Ho-Chan Kim, 2009 .

Tool Path Generation for Micro-Abrasive Jet Machining Process with Micro-Mask

Ho-Chan Kim, Tae Jo Ko, In Hwan Lee, 2011 .

Mask Modeling of a 3D Non-planar Parent Material for Micro-abrasive Jet Machining

Ho-Chan Kim, Tae Jo Ko, In Hwan Lee, 2010 .

Development of a Novel Micro-stereolithography Technology using UV Lamp and Optical Fiber

T. Ko, I. Lee, Seung Pyo Lee, 2006 .

Korean Terminologies for Additive Manufacturing according to the ISO/ASTM 52900 Standard

D. Ahn, I. Lee, Ho-Chan Kim, 2020 .

Laser curing of silver-based conductive inks for in situ 3D structural electronics fabrication in stereolithography

Ryan B. Wicker, Eric MacDonald, In Hwan Lee, 2014 .

A Study on the Mechanical Properties of Additive Manufactured Polymer Materials

I. Lee, Dongbum Kim, Hae-Yong Cho, 2015 .

Finite Element Analysis for Fracture Criterion of PolyJet Materials

I. Lee, Hae-Yong Cho, D. B. Kim, 2015 .

Development of Hybrid Fused Deposition Modeling System for Three-Dimensional Circuit Device Fabrication

In Hwan Lee, S. T. Oh, I. Lee, 2014 .