P. Lynch

发表

Time and spatial resolution of slip and twinning in a grain embedded within a magnesium polycrystal

M. Kunz, N. Tamura, M. Barnett, 2014 .

Scalable Manufacturing of Free‐Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity

Xungai Wang, Y. Gogotsi, Si Qin, 2020, Advanced materials.

Characterizing Grain-Oriented Silicon Steel Sheet Using Automated High-Resolution Laue X-ray Diffraction

A. Stevenson, M. Barnett, P. Lynch, 2017, Metallurgical and Materials Transactions A.

Development of a laboratory-based transmission diffraction technique for in situ deformation studies of Mg alloys

M. Barnett, P. Lynch, S. Kada, 2015 .

Stress relaxations during cyclic loading-unloading in precipitation hardened Mg-4.5Zn

M. Barnett, J. Kimpton, P. Lynch, 2021 .

X-ray analysis of twin dominated deformation in an aged Mg-7Sn-3Zn-0.04Na alloy

T. Dorin, P. Čížek, M. Barnett, 2020, Journal of Magnesium and Alloys.

In-situ X-ray diffraction studies of slip and twinning in the presence of precipitates in AZ91 alloy

M. Barnett, J. Kimpton, P. Lynch, 2016 .

The Effect of Ageing on the Compressive Deformation of Mg-Sn-Zn-Na Alloy

M. Barnett, A. Ghaderi, P. Lynch, 2016 .

Deformation modes during room temperature tension of fine-grained pure magnesium

N. Birbilis, C. Davies, Q. Gu, 2021, Acta Materialia.

Sequentially Bridged Ti3C2Tx MXene Sheets for High Performance Applications

Dylan Y. Hegh, Dylan Y Hegh, M. Naebe, 2021, Advanced Materials Interfaces.

Additive-Free MXene Liquid Crystals and Fibers

Zhiyu Wang, Xungai Wang, Y. Gogotsi, 2020, ACS central science.

Synchrotron X-ray scattering and IR-mapping studies of wet-spun lignin-derived carbon fibre precursor

M. Naebe, M. Tobin, P. Lynch, 2018, Composites Science and Technology.

A high-resolution synchrotron-based diffraction technique for in situ characterization of deformation behaviour in magnesium alloys

M. Barnett, J. Kimpton, P. Lynch, 2018, Journal of Applied Crystallography.

Determining the dislocation contrast factor for x-ray line profile analysis

P. Lynch, N. Armstrong, 2004 .

Direct Observation of the Intergallery Expansion of Polystyrene–Montmorillonite Nanocomposites

R. Simons, S. Bateman, G. Qiao, 2011 .

Influence of Hydrogen Peroxide in the Preparation of Nanocrystalline Ceria

A. Hughes, P. Lynch, F. H. Scholes, 2007 .

Plastic yielding in lath martensites – An alternative viewpoint

M. Barnett, P. Lynch, P. Bate, 2018, Acta Materialia.

A uniaxial tensile stage with tracking capabilities for micro X-ray diffraction applications

R. Kirkham, P. Davey, M. Gibson, 2011 .

An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension

Ahmed A. Saleh, E. Pereloma, C. Davies, 2019, Materials Science and Engineering: A.

In Situ Synchrotron Analysis of Twinning Stresses in an Aged Mg-4.5Zn Alloy

M. Barnett, P. Lynch, Jun Wang, 2018, Materials Science Forum.

Dislocation structures in a Ti–6Al–4V alloy subjected to cyclic tensile deformation

P. Čížek, P. Lynch, S. Kada, 2022, Materials Science and Engineering: A.

Transmission electron microscopy investigation of the dislocation structure in a Ti-6Al-4V alloy subjected to an early stage of cyclic deformation

P. Čížek, Jiangting Wang, P. Lynch, 2021, Materials Characterization.

In Situ Observation of Strain Evolution in Cp-Ti Over Multiple Length Scales

M. Gibson, A. Stevenson, D. Tomus, 2011 .

Bayesian analysis reveals the impact of load partitioning on microstructural evolution in Ti-6Al-4V during in-situ tensile loading

P. Čížek, P. Lynch, N. Armstrong, 2021 .

Dislocation structures representing individual slip systems within the α phase of a Ti–6Al–4V alloy deformed in tension

P. Čížek, Jiangting Wang, P. Lynch, 2020 .

Influence of precipitation on tension and compression twinning in Mg-6.5Zn alloy

M. Barnett, P. Lynch, Jun Wang, 2022, Scripta Materialia.

Appearance of textures with a c-axis parallel to the extrusion direction in Mg alloys

M. Barnett, P. Lynch, Jun Wang, 2022, Scripta Materialia.

Highly Conductive Ti3 C2 Tx MXene Hybrid Fibers for Flexible and Elastic Fiber-Shaped Supercapacitors.

Zhiyu Wang, Xungai Wang, Si Qin, 2019, Small.

X-ray diffraction line broadening from thermally deposited gold films

E. Dooryhee, P. Lynch, S. Dligatch, 2000 .

Spinning Regenerated Silk Fibers with Improved Toughness by Plasticizing with Low Molecular Weight Silk.

Dylan Y. Hegh, Dylan Y Hegh, Xungai Wang, 2020, Biomacromolecules.

Fast and scalable wet-spinning of highly conductive PEDOT:PSS fibers enables versatile applications

Zhiyu Wang, Xungai Wang, Si Qin, 2019, Journal of Materials Chemistry A.

A laboratory based system for laue micro x-ray diffraction.

N. Tamura, S. Wilkins, A. Stevenson, 2007, The Review of scientific instruments.

An in situ synchrotron study of the localized B2↔B19′ phase transformation in an Ni–Ti alloy subjected to uniaxial cyclic loading–unloading with incremental strains

Ahmed A. Saleh, E. Pereloma, C. Davies, 2020, Journal of Applied Crystallography.

Application of white-beam X-ray microdiffraction for the study of mineralogical phase identification in ancient Egyptian pigments

N. Tamura, A. Stevenson, P. Lynch, 2007 .

Investigation of the interfacial structure of ultra-thin platinum films using X-ray reflectivity and X-ray photoelectron spectroscopy

P. D. Swift, B. Gong, P. Lynch, 2000 .

A comparative EBSD and micro-XRD study of the intergranular grain structure in CP-Ti

Andrew W. Stevenson, Mark A. Gibson, M. Gibson, 2010 .

Stress Evolution during Tensile Twinning in MgAZ31 Alloy Processed by Extrusion

M. Barnett, P. Lynch, K. S. Raju, 2013 .

In situ study of plastic deformation in a Mg–Ce alloy using polychromatic micro X-ray diffraction

A. Stevenson, P. Lynch, C. Bettles, 2012 .

MXene Films: Scalable Manufacturing of Free‐Standing, Strong Ti 3 C 2 T x MXene Films with Outstanding Conductivity (Adv. Mater. 23/2020)

Xungai Wang, Y. Gogotsi, Si Qin, 2020, Advanced Materials.