S. Machiya

发表

Bending strain analysis considering a shift of the neutral axis for YBCO coated conductors with and without a Cu stabilizing layer

S. Nagaya, N. Hirano, K. Shikimachi, 2011 .

Macroscopic Elastic Constant Analysis and Strain Behavior of Crystal on the YBCO Layer in a YBCO-coated Conductor

T. Shobu, Keisuke Tanaka, S. Machiya, 2011 .

Analysis of elastic properties of textured thin films

K. Tanaka, Y. Akiniwa, S. Machiya, 2003, Micro-Nanomechatronics and Human Science, 2004 and The Fourth Symposium Micro-Nanomechatronics for Information-Based Society, 2004..

Analysis of elastic properties of textured thin films

Y. Akiniwa, S. Machiya, K. Serizawa, 2004 .

Development of cryogenic tensile testing apparatus for lattice strain measurement using synchrotron radiation for REBCO composite conductors

T. Shobu, T. Nakamoto, M. Sugano, 2020, Superconductor Science and Technology.

Residual Strains in ITER Conductors by Neutron Diffraction

T. Hemmi, S. Machiya, N. Koizumi, 2014 .

Internal Strain and Mechanical Properties at Low Temperatures of Surround Cu Stabilized YBCO Coated Conductor

Y. Tsuchiya, Hiroshi Suzuki, S. Machiya, 2010, IEEE Transactions on Applied Superconductivity.

Force free strain exerted on a YBCO layer at 77 K in surround Cu stabilized YBCO coated conductors

Hiroshi Suzuki, S. Machiya, K. Osamura, 2010 .

Fatigue damage evaluation in SiCp/2024 by X-ray diffraction method

Y. Akiniwa, Keisuke Tanaka, S. Machiya, 2006 .

Changes of Internal Stress in Solid-Oxide Fuel Cell During Red-Ox Cycle Evaluated by In Situ Measurement With Synchrotron Radiation

Y. Akiniwa, Keisuke Tanaka, H. Sumi, 2006 .

Control of residual strain and twin boundary by annealing under strain

S. Awaji, T. Koganezawa, Masugu Sato, 2013 .

Strain Dependence of Superconducting Properties for GdBCO Coated Conductor in High Field Under Tensile Load

T. Shobu, S. Awaji, G. Nishijima, 2012, IEEE Transactions on Applied Superconductivity.

Prebending Effect on Three-Dimensional Strain in ${\rm CuNb}/({\rm Nb},\ {\rm Ti})_{3}{\rm Sn}$ Wires Under a Tensile Load

S. Awaji, K. Watanabe, S. Machiya, 2012, IEEE Transactions on Applied Superconductivity.

Internal strain measurement for Nb3Sn wires using synchrotron radiation

T. Shobu, S. Awaji, T. Koganezawa, 2012 .

Angular dependence of residual strain in CuNb/(Nb, Ti)3Sn wires

S. Awaji, G. Nishijima, S. Machiya, 2010 .

Residual strain measurement using neutron diffraction for practical Nb3Sn wires under a tensile load

S. Awaji, G. Nishijima, S. Machiya, 2010 .

Relation Between the Crystal Axis and the Strain Dependence of Critical Current Under Tensile Strain for GdBCO Coated Conductors

S. Awaji, K. Watanabe, T. Izumi, 2013, IEEE transactions on applied superconductivity.

Improvement of $J_{\rm c}$ for GdBCO Coated Conductors by Annealing Under Strain

S. Awaji, K. Watanabe, Y. Shiohara, 2013, IEEE Transactions on Applied Superconductivity.

The direct evaluation of the internal strain of biaxially textured YBCO film in a coated conductor using synchrotron radiation

H. Adachi, Masugu Sato, M. Sugano, 2008 .

The effect of the 2D internal strain state on the critical current in GdBCO coated conductors

T. Saitoh, S. Nagaya, N. Hirano, 2012 .

Evaluation of material properties of SiC particle reinforced aluminum alloy composite using neutron and X-ray diffraction

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2006 .

Uniaxial strain dependence of the critical current of DI-BSCCO tapes

T. Shobu, K. Kajiwara, S. Machiya, 2014 .

Mechanism for the uniaxial strain dependence of the critical current in practical REBCO tapes

S. Machiya, K. Osamura, D. Hampshire, 2016 .

Measurement of Residual Stress Distribution by Strain Scanning Method using High Energy X-rays from Synchrotron Source

Y. Akiniwa, Keisuke Tanaka, Kenji Suzuki, 2005 .

Stress Measurement near Surface Region by Strain Scanning Method Using Neutron Diffraction

Y. Akiniwa, Keisuke Tanaka, H. Kimura, 2006 .

Effect of epoxy impregnation on strain distribution of materials in Bi2223 superconducting coils by using synchrotron X-ray diffraction

T. Shobu, K. Kajiwara, S. Machiya, 2015 .

Direct evidence of the high strain tolerance of the critical current of DI-BSCCO tapes fabricated by means of the pretensioned lamination technique

S. Machiya, K. Osamura, J. Fujikami, 2013 .

Recent Progress in Methods for Non-invasive Measurements of Local Strain in Practical Superconducting Wires and Conductors using Quantum Beam Techniques

T. Hemmi, K. Kajiwara, S. Awaji, 2014 .

Progress of Evaluation Techniques for Electromagnetic and Mechanical Properties of High Temperature Composite Superconductors

M. Hojo, D. Larbalestier, A. Otto, 2009 .

Influence of Artificial Pinning Centers on Strain Effect in BaHfO3-Doped $\mbox{GdBa}_{2}\mbox{Cu}_{3}\mbox{O}_{y}$-Coated Conductors Fabricated by Pulsed Laser Deposition

T. Izumi, M. Sugano, S. Machiya, 2016, IEEE Transactions on Applied Superconductivity.

Local strain exerted on Nb3Sn filaments in an ITER strand

A. Nijhuis, T. Nakamoto, S. Machiya, 2015 .

Inverted-parabolic and weak strain dependencies on the critical current in practical <110> and <100> oriented REBCO tapes

K. Kajiwara, S. Fujita, Y. Iijima, 2019, AIP Advances.

Mechanical—electromagnetic property of stainless sheet laminated BSCCO–2223 wires

S. Machiya, T. Kawasaki, K. Osamura, 2018, Materials Research Express.

Reversibility of micro-yielding and critical current in a YBCO-coated conductor caused by a uniaxial tensile load

A. Otto, H. Adachi, Masugu Sato, 2007 .

Non-destructive magneto-strain analysis of YB2Cu3Oy superconducting magnets using neutron diffraction in the time-of-flight mode

M. Muralidhar, S. Machiya, M. Tomita, 2012 .

Applied Strain Dependence of Crtical Curent and Inernal Lattice Strain for BaHfO 3 -doped GdBa 2 Cu 3 O y Coated Conductors

T. Izumi, M. Sugano, S. Machiya, 2016 .