B. Peng

发表

Mechanical properties of ultrananocrystalline diamond thin films relevant to MEMS/NEMS devices

H. Espinosa, B. Prorok, D. Gruen, 2003 .

EXPERIMENTS AND MODELING OF CARBON NANOTUBE-BASED NEMS DEVICES

Horacio Dante Espinosa, Nicola Pugno, Changhong Ke, 2005 .

Materials science and fabrication processes for a new MEMS technology based on ultrananocrystalline diamond thin films

Horacio Dante Espinosa, Orlando Auciello, John A. Carlisle, 2004 .

Fracture strength of ultrananocrystalline diamond thin films—identification of Weibull parameters

H. Espinosa, B. Prorok, D. Gruen, 2003 .

Nanoscale Testing of One-Dimensional Nanostructures

Yong Zhu, H. Espinosa, Yugang Sun, 2008 .

Grain texture dependent charge transport behaviors and dielectric responses of BaTiO3 films fabricated on MgO substrates

Yongjin Wang, Wei Zhang, B. Peng, 2022, Materials Research Bulletin.

Elasticity, strength, and toughness of single crystal silicon carbide, ultrananocrystalline diamond, and hydrogen-free tetrahedral amorphous carbon

Xianghui Xiao, C. Zorman, H. Espinosa, 2006 .

Mechanical properties of ultrananocrystalline diamond thin films for MEMS applications

Xingcheng Xiao, H. Espinosa, B. Prorok, 2002 .

Investigation of passive films on nickel Alloy 690 in lead-containing environments

Jingli Luo, Houyi Ma, Y. Lu, 2008 .

On-chip Testing and Properties of MEMS Materials: Size Scale Effects

H. Espinosa, B. Peng, S. Berbenni, 2006 .

A Membrane Deflection Fracture Experiment to Investigate Fracture Toughness of Freestanding MEMS Materials

H. Espinosa, B. Peng, 2003 .

TRANSPORT PROPERTIES OF Ag-DOPED La0.7Ca0.3MnO3 THIN FILMS ON SILICON SUBSTRATE

B. Peng, W. L. Zhang, X. Cao, 2010 .

A Comparison of Mechanical Properties of Three MEMS Materials-Silicon Carbide , Ultrananocrystalline Diamond , and Hydrogen-Free Tetrahedral Amorphous Carbon ( TaC )

H. Espinosa, O. Auciello, J. Carlisle, 2004 .

An analysis of the membrane deflection experiment used in the investigation of mechanical properties of freestanding submicron thin films

N. Pugno, H. Espinosa, B. Peng, 2006 .

The effect of surface treatment on the corrosion behavior of pure Ta sheet in an equimolar NaCl-KCl melt at 850℃ in air, part 2: Diamond film, TaC film, Ta-Si coating and Ta-Si-Al coating

B. Peng, Shubing Hu, Wenkai Wang, 2019, Corrosion Science.

Effect of Titanium Sulfide Particles on Grain Size in Low Carbon Steel

Huigai Li, B. Peng, Fangjie Li, 2017 .

Effect of precipitates on grain growth in non-oriented silicon steel

Huigai Li, B. Peng, Dan Zhao, 2017, Journal of Materials Research.

The effect of surface treatment on the corrosion behavior of a pure Ta sheet in an equimolar NaCl–KCl melt at 850°C in air. Part 1: Laser surface melting

Kai Liu, B. Peng, Kanghui Wang, 2019, Materials and Corrosion.

Effects of argon pressure on magnetic properties and low-field magnetostriction of amorphous TbFe films

Bin Peng, Wenxu Zhang, B. Peng, 2010 .

Switching-behavior improvement in HfO2/ZnO bilayer memory devices by tailoring of interfacial and microstructural characteristics

Xuehua Zhang, B. Peng, F. Hu, 2022, Nanotechnology.

Fracture size effect in ultrananocrystalline diamond: Applicability of Weibull theory

Horacio Dante Espinosa, Xianghui Xiao, John A. Carlisle, 2007 .

A MEMS device for In Situ TEM / AFM / SEM / STM Testing of Carbon Nanotubes and Nanowires

H. Espinosa, B. Peng, Y. Zhu, 2003 .

Fracture Size Effect in Ultrananocrystalline Diamond: Weibull Theory Applicability

H. Espinosa, B. Peng, 2004 .

A microelectromechanical system for nano-scale testing of one dimensional nanostructures

H. Espinosa, I. Petrov, Yong Zhu, 2008 .

A New Methodology to Investigate Fracture Toughness of Freestanding Thin Solid Films

H. Espinosa, B. Peng, 2003 .

Effects of stress on the magnetic properties of the amorphous magnetic films

S. Q. Yang, B. Peng, Wenxu Zhang, 2006 .

The effect of surface treatment on the corrosion behavior of a pure Ta sheet in an equimolar NaCl–KCl melt at 850°C in air. Part 1: Laser surface melting

Kai Liu, B. Peng, Kanghui Wang, 2019, Materials and Corrosion.

Inclusion control study in high aluminum steel

Q. Zhai, Huigai Li, B. Peng, 2018 .