D. Nolan

发表

A new quaternary phase observed in a laser treated Zn–Al–Mg–Si coating

Zhixin Chen, C. Peng, Qiyang Liu, 2014 .

Microstructural refinement of aluminium-zinc-silicon coated steels

P. Stoddart, Y. Durandet, D. Nolan, 2016 .

Effect of two different energy inputs for laser cladding of stellite 6 on P91 and P22 steel substrates

Huijun Li, D. Nolan, D. Dunne, 2014 .

Hardness prediction models based on HAZ simulation for in-service welded pipeline steels

D. Nolan, D. Dunne, Z. Sterjovski, 2005 .

Characterisation of crystallisation in amorphous soft magnetic Fe74Si11B14Ni1 powders by EBSD method

M. Jenko, M. Godec, D. Nolan, 2006 .

Estimation of fracture toughness of nitride compound layers on tool steel by application of the Vickers indentation method

M. Jenko, V. Leskovšek, M. Jenko, 2006 .

Modelling of residual stress profiles in plasma nitrided tool steel

V. Leskovšek, D. Nolan, B. Podgornik, 2008 .

Method for the quantitative assessment of transverse weld metal hydrogen cracking

Michael Law, M. Law, D. Nolan, 2008 .

Sliding wear of titanium nitride thin films deposited on Ti–6Al–4V alloy by PVD and plasma nitriding processes

V. Leskovšek, S. Braun, D. Nolan, 2006 .

Laser resurfacing of Al–Zn–Mg–Si coatings

Zhixin Chen, Q. Liu, C. Peng, 2016 .

The effects of alloying additions on the microstructure and corrosion properties of an Al-Zn galvanizing alloy

D. Nolan, 1993 .

Laser Cladding of Wear Resistant Stellite 6 Coating on P22 Steel Substrate with Two Different Energy Inputs

D. Nolan, D. Dunne, H. Li, 2014 .

Microstructural stability of thermal shayed WC–Co composite coatings in oxidising atmospheres at 450°C

D. Nolan, M. Samandi, P. Mercer, 1998 .

Artificial neural networks for modelling the mechanical properties of steels in various applications

John Norrish, Zoran Sterjovski, David J Nolan, 2005 .

Susceptibility of Low Strength Rutile Flux-Cored Weld Metal to Hydrogen Assisted Cold Cracking

D. Nolan, M. Pitrun, 2006 .

Mitigation of sensitisation effects in unstabilised 12%Cr ferritic stainless steel welds

J. Norrish, D. Nolan, Martin van Warmelo, 2007 .

Artificial neural networks for predicting diffusible hydrogen content and cracking susceptibility in rutile flux-cored arc welds

John Norrish, Zoran Sterjovski, Druce P Dunne, 2007 .

Parametric study of surface melting in zinc-aluminium coated steels

P. Stoddart, Y. Durandet, D. Nolan, 2014 .

Diffusible Hydrogen Content in Rutile Flux-Cored Arc Welds as a Function of the Welding Parameters

D. Nolan, D. Dunne, M. Pitrun, 2004 .

Diffusible Hydrogen Testing in Australia

David J Nolan, Mike Pitrun, D. Nolan, 2004 .

The influence of microstructure on the physico-chemical stability of WC-12% Co thermal spray coatings in galvanizing application

D. Nolan, 1997 .

Microstructural Development in a Laser-Remelted Al-Zn-Si-Mg Coating

M. Godec, D. Nolan, B. Podgornik, 2017, Scientific Reports.

Oxide state evaluation of magnesium and calcium in thin metallic film using Auger electron spectroscopy depth profiles

D. Nolan, D. Mandrino, 2015 .

Revealing true porosity in WC-Co thermal spray coatings

D. Nolan, M. Samandi, D. J. Nolan, 1997 .

Pre-placed WC/Ni clad layers produced with a pulsed Nd:YAG laser via optical fibres

M. Brandt, D. Nolan, S. Huang, 2003 .

Weld metal cracking in cellulosic girth welds of pipelines

D. Nolan, D. Dunne, 2009 .

Oxide-state evaluation of the zinc and aluminium in metallic thin films using Auger-electron-spectroscopy depth profiles

M. Godec, D. Nolan, D. Mandrino, 2013 .