Xiaohua Chen

发表

Thermal stability characteristics of in situ nano-particles formed in metal melt

Hao Tang, Xiaohua Chen, Yawei Niu, 2016 .

In situ synthesis of silver-nanoparticles/bacterial cellulose composites for slow-released antimicrobial wound dressing.

Yudong Zheng, Jiabin Luan, Zhigu Wu, 2014, Carbohydrate polymers.

Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Yanlin Wang, X. Hui, Yidong Wu, 2021 .

High Temperature Strengthening in 12Cr-W-Mo Steels by Controlling the Formation of Delta Ferrite

L. Chang, X. Hui, D. Lin, 2014, Metallurgical and Materials Transactions A.

Effects of direct-quenching and tempering on the microstructure and mechanical properties of an ultra-low carbon Ti containing bainite steel

Lingli Zuo, Hao Tang, Xiaohua Chen, 2020 .

Micro-alloying effect of Er and Zr on microstructural evolution and yield strength of Al-3Cu (wt.%) binary alloys

Xiaohua Chen, Zidong Wang, Xiang-lin Zhou, 2020, Materials Science and Engineering: A.

Nano scale amorphous structure of glass-coated Co68Fe4.5Si13.5B14 microwires

Xiaohua Chen, Zidong Wang, X. Hui, 2012 .

Crystallographic features of iron-rich nanoparticles in cast Cu–10Sn–2Zn–1.5Fe–0.5Co alloy

Xiaohua Chen, Zidong Wang, G. Shi, 2016 .

Strengthening and toughening strategies for tin bronze alloy through fabricating in-situ nanostructured grains

Hao Tang, Xiaohua Chen, Xiang Luo, 2015 .

First-principles calculations of (0 0 1)-Al//(0 0 1) interface in Al-Cu alloys: Atomic structure, bonding strength, stability and electronic properties

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Computational Materials Science.

Designing Bulk Metallic Glass Composites with Enhanced Formability and Plasticity

Yong Zhang, Yuan Wu, X. Hui, 2014 .

Effect of Nb on the corrosion behavior of continuous bulk metallic glass-coated steel wire composites

Xiaohua Chen, Baoyu Zhang, X. Hui, 2013, International Journal of Minerals, Metallurgy, and Materials.

Bulk metallic glass rings prepared by a modified water quenching method

Yong Zhang, Xiaohua Chen, Guoliang Chen, 2009 .

Effects of Cooling Rate on the Solidification Process of Pure Metal Al: Molecular Dynamics Simulations Based on the MFPT Method

Yanlin Wang, D. Lin, Xiaohua Chen, 2022, Metals.

High performance in base metal and CGHAZ for ferrite-pearlite steels

Hao Tang, Xiaohua Chen, Yawei Niu, 2017 .

Effects of solute content on microstructure of nano precipitate-fine grain synergistically reinforced copper alloys

Xiaohua Chen, Zidong Wang, Kaixuan Chen, 2020 .

Effect of Carbides and γ/γ' Eutectic on Crack Initiation and Propagation in Ni-based Superalloy

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2020 .

In-Situ Nanoparticles: A New Strengthening Method for Metallic Structural Material

Xianglin Zhou, Ming Yang, Shiwei Pan, 2018, Applied Sciences.

Effect of morphologies of martensite–austenite constituents on impact toughness in intercritically reheated coarse-grained heat-affected zone of HSLA steel

Xiaohua Chen, Xiang Luo, Zidong Wang, 2018 .

High Toughness Independent of Low‐Medium Heat Inputs in Coarse‐Grain Heat‐Affected Zone of a Designed HSLA Steel

Xiaohua Chen, Xiang Luo, Zidong Wang, 2017 .

Achieving superior dispersion-strengthening effect in an AA5xxx Al-Mg-Mn alloy by mico-alloying

D. Wan, Xiaohua Chen, Zidong Wang, 2023, Materials & Design.

Effects of re-solution, pre-stretching and double re-ageing treatment on mechanical behavior and microstructure of 2195 Al–Cu–Li alloy

Xiaohua Chen, Zidong Wang, Kaixuan Chen, 2022, Materials Science and Engineering: A.

Effect of undercooled austenite ausforming on the role of the M–A constituents in the CGHAZ toughness of the HSLA steels with bainite structure

Xiaohua Chen, Xiang Luo, Zidong Wang, 2022, Materials Science and Engineering: A.

Effects of Pressure on Homogeneous Nucleation and Growth during Isothermal Solidification in Pure Al: A Molecular Dynamics Simulation Study

D. Lin, Xiaohua Chen, Zidong Wang, 2022, Metals.

Slow strain rate tensile tests on notched specimens of as-cast pure Cu and Cu–Fe–Co alloys

R. Sandström, Xiaohua Chen, Zidong Wang, 2020 .

Influence of Cu content on the mechanical properties and corrosion resistance of Mg-Zn-Ca bulk metallic glasses

L. Chang, Xiaohua Chen, Yanguang Zhao, 2014, International Journal of Minerals, Metallurgy, and Materials.

Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor Ta doping

Xiaohua Chen, Xu Shen, S. Lü, 2021 .

Effect of composition on microstructure and properties of as-cast 2196 Al–Cu–Li alloy

Xiaohua Chen, Zidong Wang, Kaixuan Chen, 2022, Materials Science and Technology.

The effect of iron on the microstructure and mechanical properties of a cast Cu–12Sn-1.5Ni (wt. %) alloy

Xiaohua Chen, Zidong Wang, Aijun Zhang, 2020 .

Study on corrosion behavior of continuous bulk metallic glass-coated steel wire composite

X. Xing, Xiaohua Chen, Guoliang Chen, 2011 .

Synergistic influence of La and Zr on microstructure and mechanical performance of an Al-Si-Mg alloy at casting state

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Journal of Alloys and Compounds.

Phase equilibria and liquidus projection determination of the Ce–Co–Sb ternary system

Changrong Li, Z. Du, Xiaohua Chen, 2018, Calphad.

A Novel Design to Enhance the Mechanical Properties in Cu-Bearing Antibacterial Stainless Steel

Xiaohua Chen, Z. Xue, Yifei Liu, 2020, Materials.

Heterogeneous nucleation effect of in situ iron-rich nanoparticles on grain refinement of copper alloy

Xiaohua Chen, Zidong Wang, G. Shi, 2016 .

In-Situ Fabrication, Microstructure and Mechanical Performance of Nano Iron-Rich Precipitate Reinforced Cu and Cu Alloys

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Metals.

Effect of Cd micro-addition on microstructure and mechanical properties in ternary Al-Si-Cu alloy

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2021 .

Optimisation of deformation properties in as-cast copper by microstructural engineering. Part II. Mechanical properties

R. Sandström, Xiaohua Chen, Zidong Wang, 2020 .

Optimization of deformation properties in as-cast copper by microstructural engineering. Part I. microstructure

R. Sandström, Huahai Mao, Xiaohua Chen, 2018, Journal of Alloys and Compounds.

In situ observations of crack propagation in as-cast Cu-1.5Fe-0.5Co (wt%) alloy

Xiaohua Chen, Zidong Wang, Yongjian Cheng, 2017 .

Formation mechanism of in-situ nanostructured grain in cast Cu–10Sn–2Zn–1.5Fe–0.5Co (wt.%) alloy

Xiaohua Chen, Zidong Wang, G. Shi, 2016 .

Strengthening mechanisms of Fe nanoparticles for single crystal Cu–Fe alloy

Hao Tang, Xiaohua Chen, Zidong Wang, 2015 .

Development of wear resistant Cu-12Sn-1.5Ni alloy via minor addition of Fe during casting process

Xiaohua Chen, Zidong Wang, Aijun Zhang, 2021, Applied Surface Science.

Microstructure, Mechanical Properties, and Oxidation Behavior of AlxCr0.4CuFe0.4MnNi High Entropy Alloys

Qinjia Wang, X. Hui, Xiaohua Chen, 2017 .

Significant improvement in CGHAZ toughness of HSLA steel via welding with trailing mechanical treatment

Xiaohua Chen, Xiang Luo, Zidong Wang, 2022, Materials Science and Engineering: A.

Microstructure and mechanical properties of ultralow carbon high-strength steel weld metals with or without Cu-Nb addition

Kai Chen, Xiaohua Chen, Zidong Wang, 2021, International Journal of Minerals, Metallurgy and Materials.

Achievement of ultra-high strength in 45Si2MnCr2Mo steel via efficient and low-energy tempering

Xiaohua Chen, Kaixuan Chen, Yanliang Wang, 2022, Materials Research Express.

Formation of Si nanoparticle in Al matrix for Al-7wt.%Si alloy during complex shear flow casting

Xiaohua Chen, Xiang Luo, Zidong Wang, 2018 .

Calculations of potential functions and thermophysical behaviors for La62Al14Ni12Cu12 and Cu46Zr44Al7Y3 bulk metallic glasses

Lei Liu, Xiaohua Chen, Yong Zhang, 2008 .

Formation and capturing of nanoparticles in Cu-1wt. %Fe alloy melt during directional solidification process

Changrong Li, Xiaohua Chen, Zidong Wang, 2017 .

Dendrite remelting of petal-shaped iron-rich nanoparticles in Cu-2wt% Fe alloy at the nanoscale

Xiaohua Chen, Xiang Luo, Zidong Wang, 2016 .

Deformation Mechanism in Fe61Mn18Si11Cr10 Medium Entropy Alloy Under Different Strain Rates

Xiaohua Chen, Yun Zhang, Z. Xue, 2021, Acta Metallurgica Sinica (English Letters).

Effect of In Situ Nano‐Particles on the Microstructure and Mechanical Properties of Ferritic Steel

Yanlin Wang, Hao Tang, Xiaohua Chen, 2016 .

Microstructure and mechanical property of in-situ nano-particle strengthened ferritic steel by novel internal oxidation

Hao Tang, Xiaohua Chen, Zidong Wang, 2014 .

Hydrophilic nanofiber of bacterial cellulose guided the changes in the micro-structure and mechanical properties of nf-BC/PVA composites hydrogels

Yudong Zheng, Shaoli Guo, K. Qiao, 2015 .

Influence of dialdehyde bacterial cellulose with the nonlinear elasticity and topology structure of ECM on cell adhesion and proliferation

Yudong Zheng, K. Qiao, Xiaohua Chen, 2014 .

Morphology of Inclusions and Its Refinement Mechanism in the New P91 Heat-Resistant Pipeline Steel

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Metals.

Zero→Two-Dimensional Metal Nanostructures: An Overview on Methods of Preparation, Characterization, Properties, and Applications

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2021, Nanomaterials.

Ab initio molecular dynamics simulation of the atom packing and density of Al-Ni amorphous alloys

Zi-kui Liu, X. Hui, D. Lin, 2010 .

Precipitate Analysis of Nanoparticle-Reinforced Tin Bronze Using Atom Probe Tomography

Wang Zidong, Xiaohua Chen, Yawei Niu, 2015 .

Microstructure and mechanical properties of welding metal with high Cr-Ni austenite wire through Ar-He-N2 gas metal arc welding

Xiaohua Chen, Xiang Luo, Dongqing Yang, 2018, Journal of Manufacturing Processes.

Effect of nanoparticles formed in liquid melt on microstructure and mechanical property of high strength naval steel

Yanlin Wang, Hao Tang, Xiaohua Chen, 2015 .

Continuously manufacturing of bulk metallic glass-coated wire composite

Yong Zhang, Zhaoping Lu, X. Xing, 2010 .

Thermodynamic Analysis of Ti3O5Nanoparticles Formed in Melt and Their Effects on Ferritic Steel Microstructure

Yanlin Wang, A. Volinsky, X. Pang, 2018, Materials.

Heterogeneous nucleation effect of in situ nanoparticles on the metal-matrix microstructure

Hao Tang, Xiaohua Chen, Xiang Luo, 2014 .

Silver nanoparticle/bacterial cellulose gel membranes for antibacterial wound dressing: investigation in vitro and in vivo

Yudong Zheng, Zhigu Wu, Yudong Zheng, 2014, Biomedical materials.

Effects of silver powder particle size on the microstructure and properties of Ag-Yb2O3 electrical contact materials prepared by spark plasma sintering

Xiaohua Chen, C. Jia, Xiang-bing Liu, 2010 .

Development of Zr-based metallic glass matrix composites with hybrid reinforcing structures

Xuefeng Tang, Xiaohua Chen, Zhen Zhang, 2021 .

Optimizing mechanical properties of AlCoCrFeNiTix high-entropy alloys by tailoring microstructures

Yong Zhang, J. Qiao, Xiaohua Chen, 2013, Acta Metallurgica Sinica (English Letters).

Fe-B-Si-Zr bulk metallic glasses with ultrahigh compressive strength and excellent soft magnetic properties

J. Si, X. Hui, Xiaohua Chen, 2016 .

Coating thickness control in continuously fabricating metallic glass-coated composite wires

Zhaoping Lu, Xiaohua Chen, Baoyu Zhang, 2013, International Journal of Minerals, Metallurgy, and Materials.

Confined fracture behavior of bulk metallic glass-coated tungsten composite wires produced by continuously coating process

Xiaohua Chen, Baoyu Zhang, X. Hui, 2013 .

Magnetocaloric effect in Er-Al-Co bulk metallic glasses

Yuan Wu, Zhaoping Lu, Zhiyi Xu, 2011 .

The role of vacancy in alloyed (001)-Al//(001) interface

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Materials Today Communications.

First Principles Investigation of the Effects of Chemical Short-Range Ordering Clusters on the Ideal Tensile Strength and Ductility of Aluminum Alloys

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Metals.

The origins of segregation behaviors of solute atoms and their effect on the strength of α-Al//θ'-Al2Cu interfaces in Al-Cu alloys.

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Physical chemistry chemical physics : PCCP.

Quasi in situ observation of twinning evolution during strain path change in magnesium alloy

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Journal of Materials Research.

Phase Stability and Deformation Behavior of TiZrHfNbO High-Entropy Alloys

Qinjia Wang, Yandong Wang, W. Wang, 2020, Frontiers in Materials.

Precipitates-interaction capture of nano-sized iron-rich precipitates during copper solidification

Xiaohua Chen, Zidong Wang, Kaixuan Chen, 2019, Materials Science and Technology.

Modifying of microstructure and toughness in the weld metal prepared by welding wire containing nanosized titanium oxides

Yanlin Wang, Xiaohua Chen, Xiang Luo, 2021 .

Manufacturing process and microstructure of copper-coated aluminum wires

Xiaohua Chen, Zidong Wang, X. Hui, 2015, International Journal of Minerals, Metallurgy, and Materials.

Mechanism of Balanced Strength and Ductility in High-Strength Low-Alloy Steel

Yanlin Wang, Xiaohua Chen, Zidong Wang, 2022, Metals.

Effect of Heat Treatment on Microstructure and Mechanical

Xiaohua Chen, Zidong Wang, Kaixuan Chen, 2020 .

Microstructure and deformation workability of Ni-based superalloy Udimet720Li fabricated by composite shear flow casting

Xiaohua Chen, Zidong Wang, Kaixuan Chen, 2023, Journal of Alloys and Compounds.

Extra-ductile and strong tin bronze alloy via high-density intragranular ultra-nano precipitation with minimal lattice misfit

Kaisheng Ming, Xiaohua Chen, Zidong Wang, 2023, Scripta Materialia.