B. Krakauer

发表

Modeling of Ferrite-Austenite Phase Transformation

S. Pan, Ming-Fang Zhu, D. An, 2015 .

Correlation between Microstructures and Yield Strength of a High Strength Enameling Steel

M. Jiang, S. Pan, B. Krakauer, 2012 .

Modeling of Ferrite-Austenite Phase Transformation Using a Cellular Automaton Model

S. Pan, Ming-Fang Zhu, D. An, 2014 .

Correlation between microstructure and yield strength of a high-strength cold rolled enameling steel

M. Jiang, M. Zhu, B. Krakauer, 2012 .

Effect of heat treatment on the microstructure and yield strength of a cold-rolled enameling steel

C. Lin, M. Zhu, D. An, 2015 .

Cellular automaton simulation of ferrite-austenite transformation in low-carbon steels

C. Lin, M. Zhu, S. Pan, 2015 .

The effects of alloying elements on the peritectic range of Fe–C–Mn–Si steels

D. Seidman, B. Krakauer, Tao Liu, 2021, Journal of Materials Science.

Time-of-use electricity price effects: Arizona

A. Miedema, J. Olson, B. Krakauer, 1978 .

A system for systematically preparing atom‐probe field‐ion‐microscope specimens for the study of internal interfaces

D. Seidman, B. Krakauer, J. Hu, 1990 .

Systematic procedures for atom-probe field-ion microscopy studies of grain boundary segregation

D. Seidman, B. Krakauer, 1992 .

Further statistical analysis of the composition of a ∑ ≅9≈(−1,−1,4) grain boundary in a Mo(Re) alloy studied by atom-probe field-ion microscopy

D. Seidman, B. Krakauer, J. Hu, 1991 .

A Gibbs energy balance model for the isothermal ferrite-to-austenite transformation

Qian Li, S. Pan, D. An, 2020 .

Atomic scale studies of solute-atom segregation at grain boundaries: Experiments and simulations☆

David N. Seidman, D. Seidman, B. Krakauer, 1994 .

The structure and composition of A Σ ≅ 9 interface in a Mo(Re) alloy via transmission electron and atom-probe field-ion microscopies

D. Seidman, B. Krakauer, J. Hu, 1989 .

Subnanometer scale study of segregation at grain boundaries in an Fe(Si) alloy

David N. Seidman, D. Seidman, B. Krakauer, 1998 .

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

D. An, B. Krakauer, M. Zhu, 2021, Materials.

Evolution of Microstructure and Carbon Distribution During Heat Treatments of a Dual-Phase Steel: Modeling and Atom-Probe Tomography Experiments

D. Seidman, D. Isheim, S. Pan, 2018, Metallurgical and Materials Transactions A.

Study of the Dynamic Strain-Induced Transformation Process of a Low-Carbon Steel: Experiment and Finite Element Simulation

Lei He, Chen Lin, B. Krakauer, 2016 .

Imperfection sensitivity of externally-pressurized, thin-walled, torispherical-head buckling

B. Krakauer, Z. Sang, Lei Li, 2017 .

Buckling of thin-walled torispherical heads in water heater tanks

Shaojian Ding, B. Krakauer, Z. Sang, 2014 .

Burst pressures of thin-walled cylinders constructed of steel exhibiting a yield plateau

B. Krakauer, Tian-hong Zheng, Z. Sang, 2021 .

A cellular automaton model integrated with CALPHAD-based thermodynamic calculations for ferrite-austenite phase transformations in multicomponent alloys

Dongke Sun, Shuang-Tin Chen, S. Pan, 2019, Computational Materials Science.

Absolute atomic-scale measurements of the Gibbsian interfacial excess of solute at internal interfaces.

B. Krakauer, Krakauer, Seidman, 1993, Physical review. B, Condensed matter.

A transmission electron microscopy and atom-probe tomography study of martensite morphology and composition in a dual-phase steel

D. Seidman, D. Isheim, M. Jiang, 2020 .

Distribution of Grain Boundaries in an Fe(Si) Alloy

D. Seidman, B. Krakauer, 2000 .

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

D. Seidman, D. An, B. Krakauer, 2020 .