Xiaodong Niu

发表

Investigations of the wetting behaviors of Zn–25Sn, Zn–25Sn–XPr and Zn–25Sn–YAl high temperature lead free solders in air and Ar ambient

Kwang-Lung Lin, Xiaodong Niu, 2015 .

Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy

Jun Wang, J. Meng, Xiaodong Niu, 2008 .

Effect of yttrium-rich misch metal on the microstructures, mechanical properties and corrosion behavior of die cast AZ91 alloy

J. Meng, Xiaodong Niu, X. Qiu, 2009 .

Effects of Al, Pr additions on the wettability and interfacial reaction of Zn–25Sn solder on Cu substrate

Kwang-Lung Lin, Xiaodong Niu, 2016, Journal of Materials Science: Materials in Electronics.

Broadband Cr3 +/(Pr3 +/Yb3 +) quantum cutting down-conversion system doped in Y2O3/Y3Al5O12 heterostructure thin film

Zhenzhong Zhang, Xiaojuan Liu, Fanzhi Meng, 2016 .

Microstructure, mechanical properties, in vitro degradation and cytotoxicity evaluations of Mg-1.5Y-1.2Zn-0.44Zr alloys for biodegradable metallic implants.

Yangde Li, Xiaojuan Liu, Wei Sun, 2013, Materials science & engineering. C, Materials for biological applications.

The microstructure and mechanical properties of Zn-25Sn-XAl (X=0–0.09 wt%) high temperature lead free solder

Kwang-Lung Lin, Xiaodong Niu, 2016 .

Effects of 1.5 wt% samarium (Sm) addition on microstructures and tensile properties of a Mg−6.0Zn−0.5Zr alloy

K. Guan, Qiang Yang, Xiaojuan Liu, 2018 .

Microstructures and mechanical properties of a high-strength Mg-3.5Sm-0.6Zn-0.5Zr alloy

K. Guan, Qiang Yang, Xiaojuan Liu, 2017 .

Effects of 0.5 wt% Ce addition on microstructures and mechanical properties of a wrought Mg−8Gd−1.2Zn−0.5Zr alloy

K. Guan, Qiang Yang, J. Meng, 2018, Journal of Alloys and Compounds.

Microstructures and mechanical properties of a hot-extruded Mg−8Gd−3Yb−1.2Zn−0.5Zr (wt%) alloy

K. Guan, Qiang Yang, Fanzhi Meng, 2019, Journal of Alloys and Compounds.

Electrochemical Behaviors of Die-Cast Mg-4Al-0.4Mn-Xpr (x=0, 1, 4) Alloys in NaCl Solution

Wei Sun, J. Meng, Xiaodong Niu, 2013 .

Study on the assemblage of Y and Gd on microstructure and mechanical properties of hot extruded Mg–Al–Zn alloy

Yangde Li, Qiang Yang, Xiaojuan Liu, 2015 .

The mechanism of Al contents (0–0.09 wt%) on the wettability and interfacial intermetallic compounds growth of Zn-25Sn/Cu

Kwang-Lung Lin, Xiaodong Niu, 2017, 2017 18th International Conference on Electronic Packaging Technology (ICEPT).

Improved electrochemical performance by doping cathode materials Sr 2 Fe 1.5 Mo 0.5−x Ta x O 6−δ (0.0 ≤ x ≤ 0.15) for Solid State Fuel Cell

Xiaolong Deng, C. Yao, J. Meng, 2014 .

Assessment of LaM0.25Mn0.75O3-δ (M = Fe, Co, Ni, Cu) as promising cathode materials for intermediate-temperature solid oxide fuel cells

J. Meng, Xiaojuan Liu, Fanzhi Meng, 2015 .

Electrical conductivity optimization in electrolyte-free fuel cells by single-component Ce0.8Sm0.2O2-δ–Li0.15Ni0.45Zn0.4 layer

Jian Meng, Xiaojie Wu, Hongping Li, 2012 .