H. Oikawa

发表

Lattice diffusion of substitutional elements in iron and iron-base solid solutions. A critical review.

H. Oikawa, 1983 .

People's Republic of China's Competitive Threat to Latin America: An Analysis for 1990-2002

S. Lall, J. Weiss, H. Oikawa, 2004 .

Collective Evaluation of Temperature and Stress Dependence of Creep Rupture Life in Austenitic Stainless Steels

Koichi Yagi, Hiroshi Oikawa, Kouichi Maruyama, 1995 .

7 – Diffusion behaviour of creep-resistant steels

H. Oikawa, Y. Iijima, 2008 .

An Analysis of High Temperature Creep as Relaxation Processes with Special Reference to CrMoV Steels

K. Maruyama, H. Oikawa, 1986 .

Cyclic and Monotonic Deformation of Interstitial-Free Iron*

M. Meshii, K. Maruyama, H. Oikawa, 1985 .

Effects of the solute concentration on the deformation characteristics of FeMo solid solutions in the power-law creep regime at 1100 K

H. Oikawa, S. Nanba, 1988 .

High-temperature creep mechanism in an Al-2 at% Mg alloy determined by stress-relaxation tests

H. Oikawa, S. Karashima, 1976 .

Hot Deformation of Aluminum Alloys

H. Oikawa, 1990 .

NO MEASUREMENT IN DIESEL SPRAY FLAME USING LASER INDUCED FLUORESCENCE

M. Noda, H. Oikawa, H. Nakagawa, 1997 .

Shear Strength and Dilatancy of Peat

H. Oikawa, M. Tsushima, 1982 .

Creep behavior and deformation microstructures of Mg–Y alloys at 550 K

K. Maruyama, H. Oikawa, Mayumi Suzuki, 1998 .

Vacancy Mechanism of Interdiffusion in Binary Metallic Solutions

A. G. Guy, H. Oikawa, 1983 .

Diffusion of Ni 63 and W 185 in Nickel-Tungsten Alloys (On the Relation between High-Temperature Creep and Diffusion in Nickel Base Solid Solutions. III)

H. Oikawa, H. Suto, K. Monma, 1964 .

The effects of magnetic annealing on recrystallization and grain-boundary character distribution (GBCD) in iron-cobalt alloy polycrystals

H. Oikawa, Tadao Watanabe, Yuji Suzuki, 1990 .

Catalyst Assisted Regeneration System for a Diesel Particulate Trap

Yasuaki Kumagai, Y. Kono, T. Ikeda, 1990 .

Multiplicity of Deformation and Shear Band Mode in Soil

Toshihiro Ogino, H. Oikawa, Hitoshi Moritoki, 2002 .

Creep deformation behavior and dislocation substructures of Mg–Y binary alloys

K. Maruyama, H. Oikawa, Mayumi Suzuki, 2001 .

Steady state deformation characteristics of α-TiAl solid solutions

H. Oikawa, T. Oomori, 1988 .

High-Temperature Deformation Behavior of Alpha Ti-5.6 mol%Al Alloy

H. Oikawa, T. Oomori, T. Yoneyama, 1988 .

Redetermination of internal stress during creep of Al-5.5 at.-%Mg alloy at high temperatures

H. Oikawa, A. Yasuda, 1979 .

Effects of the liquid phase on the high-temperature tensile ductility: From embrittlement to superplasticity

K. Maruyama, H. Oikawa, J. Koike, 1998 .

Influence of liquid-phase inclusion on high-temperature deformation behavior in Al-Bi alloys

K. Maruyama, H. Oikawa, J. Koike, 1997 .

Steady-State Creep Characteristics of Polycrystalline Nickel in the Temperature Range 500° to 1000°C

H. Oikawa, S. Karashima, T. Motomiya, 1969 .

Transmission Electron Microscopy of Substructures Developed during High-Temperature Creep in Alpha-Iron

H. Oikawa, Tadao Watanabe, S. Karashima, 1971 .

Variation in type of transient creep curve with applied stress in iron-molybdenum solid solutions

H. Oikawa, S. Karashima, M. Maeda, 1972 .

High-temperature creep mechanisms in alpha-iron and an FeMo alloy determined by stress-relaxation tests

H. Oikawa, S. Karashima, K. Ichihashi, 1976 .

Activation Parameters of High-Temperature Creep in Nickel, and in Ni-9.5at% Cr and Ni-10.3at% W Alloys

H. Oikawa, S. Karashima, T. Kato, 1973 .

Formulation of Creep Curves and Rupture Lives for Long-term Creep Property Prediction with Special Reference to a 12 Cr (H46) Steel

K. Maruyama, H. Oikawa, C. Harada, 1986 .

Prediction of long-term creep curves

K. Maruyama, H. Oikawa, 1992 .

Effects of residual oxygen on mechanical properties of iron

M. Meshii, K. Maruyama, H. Oikawa, 1986 .

Experimental study on ultrastructural changes in the rat molar periodontal membrane after discontinuation of occlusal function

H. Oikawa, 1982 .

Ethylene oligomerization over NiO /SiO2-Al2O3 catalysts prepared by a coprecipitation method

T. Fujitani, H. Oikawa, Katsuya Shimura, 2022, Molecular Catalysis.

Preparation of NiO /SiO2–Al2O3 catalysts by a homogenous precipitation method and their catalytic activity for ethylene oligomerization

T. Fujitani, H. Oikawa, Katsuya Shimura, 2022, Microporous and Mesoporous Materials.

High temperature strength of α TiAl alloys with a locally ordered structure

K. Maruyama, H. Oikawa, J. Koike, 1996 .

FLOW STRESS AND DISLOCATION STRUCTURES IN POLYCRYSTALLINE MOLYBDENUM.

H. Oikawa, S. Karashima, T. Igarashi, 1970 .

High-temperature deformation of polycrystalline beta titanium

H. Oikawa, K. Nishimura, M. Cui, 1985 .

Grain boundaries in rapidly solidified and annealed Fe-6.5 mass% Si polycrystalline ribbons with high ductility

K. Arai, H. Oikawa, Tadao Watanabe, 1989 .

Texture and grain boundary character distribution (GBCD) in rapidly solidified and annealed Fe-6.5 mass% Si ribbons

K. Yoshimi, K. Arai, H. Oikawa, 1989 .

Creep Behavior of a Cast TiAl Intermetallics

H. Oikawa, Tohru Takahashi, H. Nagai, 1989 .

An Examination of Constitutive Laws by High Temperature Creep of Engineering Materials

K. Maruyama, H. Oikawa, C. Tanaka, 1990 .

Slip Bands and Deformation Structure Developed during Creep in Alpha-Iron Single Crystals at 973 K

H. Oikawa, S. Karashima, K. Ichihashi, 1976 .

Preconcentration of Heavy Metal Ions with Thermo-Sensitive Chitosan and Atomic Absorption Spectrometric Determination of Trace Cadmium in Water

H. Oikawa, N. Uehara, Tokuo Shimizu, 2007 .

Mechanical properties and microstructure of centrifugally compacted alumina and hot-isostatically-pressed alumina

K. Maruyama, H. Oikawa, J. Koike, 1996 .

Lattice Diffusion in Iron-A Review

H. Oikawa, 1982 .

Different origins of grain size and composition effects on creep in TiAl

K. Maruyama, H. Oikawa, Tohru Takahashi, 1992 .

Effects of Yttrium on Creep Behavior and Deformation Substructures of Magnesium

K. Maruyama, R. Inoue, H. Oikawa, 2000 .

Creep in an aluminium alloy strengthened by Al4C3 particles

H. Oikawa, J. Čadek, K. Kuchařová, 1988 .

The absence of instantaneous plastic strain upon stress changes during creep of some solid solutions

H. Oikawa, 1978 .

Instantaneous plastic strain associated with stress increments during the steady state creep of Al and Al-5.5 At. Pct. Mg alloy

H. Oikawa, Katsuyoshi Sugawara, 1978 .

High Temperature Creep Behaviour of Silicon Carbide Particulate Reinforced Aluminium

H. Oikawa, J. Čadek, V. Sustek,, 1994 .

Threshold creep behaviour of discontinuous aluminium and aluminium alloy matrix composites: An overview

H. Oikawa, J. Čadek, V. Sustek,, 1995 .

Observation of the steady-state stage in high-temperature creep of γ-Ti-53Al intermetallics under low stresses

H. Oikawa, N. Hamada, 1996 .

Structure Change of TiAl during Creep in the Intermediate Stress Range

H. Oikawa, Y. Ishikawa, 1994 .

Creep in titanium aluminides

H. Oikawa, 1992 .

Significance of hardness in the evaluation of high-temperature properties of TiAl intermetallics

H. Oikawa, Tohru Takahashi, Y. Tomioka, 1989 .

Effects of Structure on Creep of Ti-53.4mol%Al Intermetallics

H. Oikawa, Tohru Takahashi, 1988 .

Highly selective conversion of ethene to propene over SAPO-34 as a solid acid catalyst

T. Baba, H. Oikawa, G. Kobayashi, 2006 .

Effects of grain size on creep behaviour of Ti-50 mol.%Al intermetallic compound at 1100 K

H. Oikawa, Takahiro Takahashi, H. Nagai, 1990 .

Texture and Grain Boundary Character Distribution (GBCD) in B-Free Ductile Polycrystalline Ni3Al

T. Hirano, H. Oikawa, T. Watanabe, 1994 .

Creep Characteristics in Ti-50 mol%Al Single Phase Polycrystals

H. Oikawa, Takahiro Takahashi, H. Nagai, 1989 .

Single-phase interdiffusion in TiAl and Ti3Al intermetallic compounds

H. Nakajima, H. Oikawa, W. Sprengel, 1996 .

HIGH-TEMPERATURE CREEP OF NICKEL-TUNGSTEN ALLOYS (ON THE RELATION BETWEEN HIGH-TEMPERATURE CREEP AND DIFFUSION IN NICKEL-BASE SOLID SOLUTIONS. PART VI)

H. Oikawa, H. Suto, K. Monma, 1964 .

Creep Behavior of Al-2.2 at%Mg Alloy at 573 K

H. Oikawa, S. Karashima, Katsuyoshi Sugawara, 1978 .

Interdiffusion in CuSn solid solutions. confirmation of anomalously large kirkendall effect

Hiroshi Oikawa, Akira Hosoi, H. Oikawa, 1975 .

Creep Mechanism of AI-Mg Alloys at High Temperatures

H. Oikawa, S. Karashima, N. Matsuno, 1975 .

Some Activation Parameters in Steady-State Creep of Aluminium–Magnesium Alloys at High Temperatures

H. Oikawa, S. Karashima, J. Kariya, 1974 .

Instantaneous Strain upon Sudden Stress Changes during Steady-State Creep of Dilute Al–Mg Alloys

H. Oikawa, S. Ito, M. Nakata, 1988 .

Interdiffusion in copper-base Cu-AI solid solutions

H. Oikawa, N. Matsuno, 1975 .

Estimation of recovery creep theories using high-temperature creep data on Fe-1.8 at % Mo alloy

K. Maruyama, H. Oikawa, S. Karashima, 1978 .

Some Aspects of Elevated-Temperature Deformation of Single-Phase Alloys

H. Oikawa, 2001 .

INSTANTANEOUS STRAIN ASSOCIATED WITH STRESS CHANGES IN HIGH-TEMPERATURE CREEP OF Al-0.3 mol% Mg ALLOY

H. Oikawa, M. Nakata, T. Yuri, 1989 .

Influence of temperature on the transition of deformation characteristics of Al1Mg alloy in the power law creep regime

K. Maruyama, H. Oikawa, Hiroyuki Sato, 1985 .

Structure change during primary creep of Al-5.5 at % Mg alloy

H. Oikawa, N. Matsuno, 1981 .

Creep mechanism in Fe-1.8 At. Pct Mo alloy at high temperatures

H. Oikawa, S. Karashima, D. Mizukoshi, 1978 .

On the stress exponent and the rate-controlling mechanism of high-temperature creep in some solid solutions

H. Oikawa, S. Karashima, 1974, Metallurgical and Materials Transactions B.

Transmission Electron Microscopy of Substructures Formed During High-Temperature Creep in Al-Mg Alloys

H. Oikawa, S. Karashima, N. Matsuno, 1974 .

On the High-Temperature Creep Behaviour and Substructures in Alpha-Iron Single Crystals

H. Oikawa, S. Karashima, T. Iikubo, 1972 .

Further experimental study of deformation characteristics of Al-Mg alloys in the power-law creep regime

H. Oikawa, Hiroyuki Sato, 1988 .

Experimental study on the stress range of class I behaviour in the creep of AlMg alloys

H. Oikawa, S. Ito, Kenji Honda, 1984 .

Steady-State Creep of Fe-4.1 at%Mo Alloy at High Temperatures

H. Oikawa, S. Karashima, M. Saeki, 1980 .

Transition in creep behavior from class I to class II: Significance of the diffusion term

H. Oikawa, 1978 .

Creep behavior of alpha-iron single crystals under the stress lower than the yield stress

H. Oikawa, S. Karashima, T. Iikubo, 1971 .

High-Temperature Deformation Characteristics of Titanium

H. Oikawa, 1986 .

Power-law Creep Behavior of Single-phase Metallic Materials: Its Understanding and Unsolved Problems Part 1

H. Oikawa, 2010 .

Dislocation density and internal stress in inverse transient creep of Fe-3.5at% Mo alloy

H. Oikawa, S. Karashima, M. Maeda, 1974 .

Discontinuous Flow in Steady-State Creep of Al–Mg Alloys at High Temperatures

H. Oikawa, S. Karashima, J. Kariya, 1973 .

Deformation Mechanism of Cubic Metals at High Temperature

H. Oikawa, H. Yoshinaga, 1989 .

Effect of a sudden temperature increase on creep of aluminum at high temperature

H. Oikawa, J. Čadek, T. Kaji, 1988 .

Work-hardening rates during the high temperature creep of aluminium determined from the instantaneous strain on sudden stress changes

H. Oikawa, S. Karashima, M. Nakata, 1983 .

Effects of Temperature and Stress on Work-Hardening and Recovery Rates during Steady-State Deformation of Lead

H. Oikawa, A. Goto, S. Karashima, 1980 .

High temperature creep of a Li-containing aluminum alloy.

H. Oikawa, M. Hayashi, 1986 .

Strain-hardening rates during the primary stage in high-temperature creep of aluminum

H. Oikawa, M. Nakata, 1987 .

Work-hardening rates derived from instantaneous elongation upon sudden load-increments during creep of lead

H. Oikawa, M. Ohnuma, 1981 .

Creep Mechanism of Fe-4. lat. pct. Mo Alloy at High Temperatures

H. Oikawa, S. Karashima, M. Saeki, 1979 .

ERRATA On the Self-Diffusion Coefficients of Aluminum in Copper (Rich)-Aluminum Solid Solution

H. Oikawa, S. Karashima, 1970 .

Analysis of Steady-state Creep of Fe-Mo Alloys from the Viewpoint of Recovery

K. Maruyama, H. Oikawa, S. Karashima, 1979 .

General creep characteristics of a 2 single-phase polycrystalline intermetallics

Y. Nagae, K. Maruyama, H. Oikawa, 1996 .

Anomalous high temperature strengthening in concentrated α titanium-aluminum alloys

H. Oikawa, J. Koike, 1996 .

Creep of a Ti-42mol% Al lamellar alloy at 1100 K

H. Oikawa, Takenobu Kiyokawa, 1996 .

Power-law creep diagram of γ-Ti-53Al intermetallics

K. Maruyama, H. Oikawa, N. Hamada, 1995 .

Diffusion in High-Temperature Deformation.

H. Oikawa, 1993 .

High temperature creep of Fe-6.3 at % Mo alloy: The stress exponent and substructures

H. Oikawa, Koichiro Kaneko, Souji Hasegawa, 1984 .

Deformation mechanism diagrams with the strain rate as a coordinate

H. Oikawa, 1980 .

Three-dimensional presentation of deformation mechanism diagrams

H. Oikawa, 1979 .

Effect of testing modes on deformation behavior at stages prior to the steady states at high temperatures in class I alloys

H. Oikawa, S. Karashima, D. Mizukoshi, 1977 .

Effect of stacking-fault energy on steady-state creep rates in copper-base solid solutions

H. Oikawa, S. Karashima, 1971 .

Steady-State Creep Characteristics of Fe-3.5 at% Mo Alloy

H. Oikawa, S. Karashima, M. Maeda, 1973 .

Effect of magnetic transformation on creep behavior of a nickel-cobalt alloy

H. Oikawa, S. Karashima, K. Oguchi, 1971 .

Grain boundary strengthening at elevated temperatures: Creep of aluminum doped zinc bicrystals and polycrystals

K. Maruyama, H. Oikawa, Y. Wananabe, 1986 .

Effects of the third element on creep behavior of Al-Mg and αFe-Be solid solution alloys

K. Maruyama, H. Oikawa, Hiroyuki Sato, 1997 .

Comparative Creep Properties of Single-Phase Intermetallics of the Ti-Al System

K. Maruyama, H. Oikawa, 1992 .

Effect of grain size on creep of Ti-53.4mol%Al intermetallics at 1100 K

H. Oikawa, Tohru Takahashi, H. Nagai, 1990 .

Creep behaviour of polycrystalline intermetallic Ti-53.4mol.%Al

H. Oikawa, Tohru Takahashi, H. Nagai, 1989 .

High Temperature Deformation of Beta Titanium-Aluminum Solid Solution Alloys

M. Seki, H. Oikawa, 1989 .

Influence of grain size on high-temperature deformation of α-Ti-Al alloys

K. Maruyama, H. Oikawa, K. Sasaki, 1988 .

Creep deformation of iron and its alloys in ferro- and paramagnetic temperature regions

H. Oikawa, Tadao Watanabe, S. Karashima, 1966 .

Interdiffusion in copper-rich cu-ag solid solutions

H. Oikawa, S. Karashima, H. Takei, 1973 .

Discontinuous flow in AlMg alloys at high temperatures

H. Oikawa, S. Karashima, J. Kariya, 1973 .

Effect of the crystal system on high-temperature strength - titanium and thallium -

H. Oikawa, 1985 .

Studies on Substructures around a Fatigue Crack in fcc Metals and Alloys

H. Oikawa, S. Karashima, T. Ogura, 1968 .

An Extrapolation Procedure of Creep Data for St Determination: With Special Reference to Cr-Mo-V Steel

K. Maruyama, H. Oikawa, 1987 .

A strain-time equation applicable up to tertiary creep stage.

K. Maruyama, H. Oikawa, C. Harada, 1985 .

Substructures Developed during Steady-State Creep of Fe-4.1 at%Mo Alloy at High Temperatures

H. Oikawa, S. Karashima, M. Saeki, 1979 .

Creep behavior and substructures of α2 Ti-34mol%Al intermetallics

T. Fukuda, M. Ohtsuka, Y. Nagae, 1997 .

Effect of Grain Size on High-Temperature Creep Behavior of γ-Ti-53 mol% Al Intermetallics in the Low Stress Region

H. Oikawa, N. Hamada, 1996 .

Three regions in the power-law creep regime of TiAl

K. Maruyama, H. Oikawa, Y. Ishikawa, 1992 .

Transient behavior after stress increase during creep of α2-Ti3Al intermetallics in the low stress region

Y. Nagae, H. Oikawa, Hiroyuki Sato, 1996 .

Studies on the Substructure Developed during Creep Deformation of Copper Crystals

H. Oikawa, S. Karashima, T. Hasegawa, 1967 .

Relation between High-Temperature Creep and Diffusion in Alloys (On the Relation between High-Temperature Creep and Diffusion in Nickel-Base Solid Solutions. VII)

H. Oikawa, H. Suto, K. Monma, 1964 .

Comments on “exponential descriptions of normal creep curves by S.G.R. Brown, R.W. Evans and B. Wilshire”

Hiroshi Oikawa, Kouichi Maruyama, K. Maruyama, 1987 .

Long-Term Creep Curve Prediction Based on the Modified θ Projection Concept

C. Tanaka, Kouichi Maruyama, H. Oikawa, 1990 .

Reduction in steady-state creep rates by aluminum-doping in zinc single crystals

K. Maruyama, H. Oikawa, S. Karashima, 1982 .

Transition of deformation behavior of Fe-2.1mol%Mo alloy in the power-law creep regime.

H. Oikawa, S. Nanba, 1987 .

Substructure Changes during Creep of Ti-50 mol%Al in Low Stress Range

H. Oikawa, Y. Ishikawa, Takenobu Kiyokawa, 1995 .

High Temperature Deformation of Alpha-Titanium

H. Oikawa, M. Cui, 1985 .

Structure Dependence of Tensile Creep Behavior in Thermo-Mechanically-Treated Ti-50Mol%Al Intermetallics

H. Oikawa, Tohru Takahashi, 1990 .

Improvement of creep rupture life by high temperature pre-creep in magnesium–aluminum binary solid solutions

K. Sawada, K. Maruyama, H. Oikawa, 2001 .

Gastric residual volume in patients using dose-escalation regimen

Chisato Usami, H. Oikawa, Hitomi Igarashi, 2015 .

Selective Heat Insulation of Combustion Chamber Walls for a DI Diesel Engine with Monolithic Ceramics

Hiroshi Oikawa, Naohisa Nakashima, Tadaaki Matsuhisa, 1989 .

Thermal cycling fatigue and deformation mechanism in aluminum alloy thin films on silicon

Hiroshi Oikawa, Kouichi Maruyama, Junichi Koike, 1998 .

Chapter 4 TNCs in Perplexity over How to Meet Local Suppliers: The Case of a Philippine Export Processing Zone

H. Oikawa, 2008 .

Empirical global value chain analysis in electronics and automobile industries:An application of Asian international input-output tables

H. Oikawa, 2008 .

Inter-Country Value Distribution in the East Asian Electronics and Automobile Industries: An Empirical Global Value Chain Approach

H. Oikawa, 2011 .

Consequences of Interpersonal Rejection

M. J. Harris, K. Ohbuchi, H. Oikawa, 2011 .

Evaluation of heat-resisting materials. A new approach.

H. Oikawa, 1986 .

Empirical equations of elastic shear modulus and reference strain for soils containing organic matters

Takayuki Takahashi, Toshihiro Ogino, H. Oikawa, 2013 .

COMPRESSION CURVE OF SOFT SOILS

Hiroshi Oikawa, H. Oikawa, 1987 .

A New Departure of Long Term Creep Curve Prediction up to the Tertiary Stage

K. Maruyama, H. Oikawa, 1987 .

Deformation Behavior of Polycrystalline Alpha-Titanium at High Temperature

H. Oikawa, M. Cui, 1985 .

To Be or Not to Be a Supplier to TNCs? An Entrepreneurial Approach to Linkage Formation in the Malaysian Electronics Industry

H. Oikawa, 2011 .

Transmission Electron Microscopy of Substructures Formed by High Temperature Creep in Fe-l.8at%Mo Alloy

H. Oikawa, S. Karashima, D. Mizukoshi, 1978 .

OPTIMIZATION OF INJECTION PRESSURE FOR FUEL CONSUMPTION AND EXHAUST EMISSIONS IN A DIMETHYL ETHER (DME) ENGINE WITH A COMMON RAIL TYPE INJECTION SYSTEM

M. Konno, T. Yanai, H. Oikawa, 2010 .